Portable Folding Workbench, 2-in-1 Pegasus Table & Sawhorse, WX051 | 31"×25"×32" dimension, heavy load capacity, fast setup, includes 2 clamps & 4 clamp dogs, lightweight portable design

Although I just received this, upon initial inspection I am really impressed with the quality of this table. It seems very well built and designed. It comes preassembled and ready to go right out of the box. Not only is the table itself impressive but even more impressive is the additional features that you can add to it. There is really no limit to how versatile this is. Also, I have a small garage and this table is very easy to store, it doesn’t take much room at all. I would definitely recommend this table, extremely durable and very well built!

Love this work table. Very sturdy. Easy to set up and fold down. Perfect height to use a chop saw, circular saw. The clamps that came with it are great. So completely portable and is not heavy to move.

Whatever kind of work you do, if space is at all a concern for you, these folding work tables might just be a lifesaver. Personally, I've recently taken up woodworking in addition to a variety of other crafts and DIY projects, but I quickly ran into a rather crippling problem. I don't have a dedicated workshop, so I'm forced to use a garage that shares "workshop space" with general purpose storage as well as some vehicles. There's not even enough space to leave a small workbench tucked away in the corner. But there is--just--enough space to keep a couple of these tables tucked in the corner as long as they're folded up, so that's exactly what I've done. When I need to take the tables out to work on a project, they're lightweight enough that it's no trouble to carry them out of storage and setting them up couldn't be easier. Once assembled, they're incredibly sturdy, support far more weight than they look like they should, and come with a variety of recessed parts holders and some built-in clamps that make any job just that little bit easier. Converting between table and sawhorse modes, as well as folding and unfolding for storage, is as easy as flipping a couple of switches. Personally, I'm using two of these. They each come with clips so you can hook them together to create a larger work surface, which is perfect for me. Admittedly, the clips themselves are nothing special, but they get the job done and allow me to have either two separate tables (or sawhorses) or one longer work surface. That also makes it easy to configure them (with some shims to get the height correct) as an outfeed table for my table saw. There's an argument to be made that these are no substitute for a "real" workbench, and there's some truth to that. But for those of us who either need to travel to and from worksites or simply don't have the space for a permanent workbench, these are the next best thing. They're also a great supplement to a workshop even if you don't have the space concerns I have.

Needed a small and portable workspace for my fabrication business. Easy to store when not in use. Basically, I agree with other reviews. Overall, very handy to have around. I only wish there were more accessories like a vice, storage hooks, etc., and also a handle for carrying.

***update 5/2024*** Still rocking. I’ve started using the peg holes for bench dogs to lift up my work and do bits off the table. (I recommend using bench dogs that fit into the holes with posts that screw into the bottom of the pucks. They might be “no slip” but they will move from sanding/cutting vibrationss.) I’m also now using the holes as a means to clamp. These work horses have been awesome and still kicking it. The price has gone up 50% since I purchased, but the flexibility of this tool and the amazing tools for the peg holes keep this on my “worth it” list. I’m updating because I purchased a new house and my two tables have been work horses for the in home modifications and builds I’m making. Particularly as my workshop is a single car garage that had to be gutted and rebuilt for counter/shelving space. Making these my primary surface/clamping tools. Of note: bottoms of the countertop are not flat and this makes clamping problematic… unless you’re using various peg whole clamp options. This is a new found feature for me and it’s added a whole new dimension to how great this tool is. I purchased a while ago when this tool was only 100, and I'm pleased I did. I own two. Are they sturdy? Yes Easy to open and close? Depends on the individual. I have the strength and a system that makes them extremely easy. Anything broken? No Clamps: The clamps do not apply strong pressure. I was hoping for clamps comparable to irwin, and not even close. LIght pressure they'll be fine. I'm not sure what else to write. It's a great sawhorse/table and allows me to be very modular in my work with the primary use as a table. I'm glad I purchased when it was 30% cheaper, and it's a tool that I hope continues to perform well. Note: I do not put an insane amount of weight on the table. I've used to hold 4x8 panels, a staging place for hardware, and a worktable for projects outside as wells as gluing up panels.

I freaking love this. I definitely do not consider myself too handy but this work table is great. For the projects that I'm taking on as a new homeowner it seems to be holding up quite well. I was skeptical of the clamps but it's efficient and so far so good. Definitely worth trying out. Great price and great product. It also cleans easy, space saving is fantastic, folds well but be careful not to pinch your fingers. Very durable so far. Easy instructions and thickness makes it sturdy

Absolutely love this! I don’t know anything tools, but I’ve been learning and bought this to replace a couple rotted boards on my deck with my brother. This thing was so sturdy! Very nice, plenty of space to work on and the clamp worked perfect!! It held the board in place while we used a circular saw to cut it to size no problem. I was surprised seeing another review had problems with the clamp because of how good mine worked. I’m a 5’1 33 year old woman and i was able to move this myself too- but i will say it can be heavy for some people. I plan on buying another one later on when i see the use / need for having two of these! Very happy with this purchase.

It is a great workbench. I really like the clamps that come with it. It is very light but very strong. It closes up to something that is small and easy to store\

Absolutely Brilliant - this is the 2nd one I have brought (you can join them together) The shipping to NZ cost a lot but I love this so much it was worth it. Solid, very sturdy & strong, yet very easy to erect, fold up & store. Not too heavy to easily move around, although I wouldnt want to carry it for half a mile. Worx have nailed it with this - it is the perfect balance between strength & portability - any heavier & it would be a hassle to move, any lighter it would not be sturdy enough. The Clamps are versatile, fairly strong, & work well, & i stands up by itself when folded. Granted, its not the cheapest, but trust me, it is well worth the extra money, & is a delight to use. But dont just take my word for it - check out the glowing reviews on YouTube. Buy it - you will love it.

It's perfect

The outer packaging & the table top are both damaged. The top is broken as indicated in the third image.

Es kam nur ein Tisch ohne Bock

Bien reçu. Pas encore testé. Mais à l’air solide !