32GB Trident Z NEO RGB DDR4 4000MHz PC4-32000 CL18 Dual Channel Kit (2x 16GB)

Great product, fast shipping.

I was sceptical at first because my previous 3200mhz RAM(Same size btw) didn’t boot up my PC when 1st slot in. But this 4000mhz allow in first try and I able to run at 4000mhz(XMP/DOCP need to be enabled). Also check your MOBO frequency requirement before buying this RAM. I saw a lot of reviews stated it’s not compatible with theirs but it mostly has to do with the MOBO limitations.

First of all I wanted to say this is a great kit. To be at 18CL and 4000MHz is fantastic! Some motherboards won't like this kit because running at 1.4v with its XMP profile may not be supported. The fault on intek seems to be 2666mhz. This is normal for DDR4 or any double data rate memory. You need to enable XMP to get 4000mhz. If this memory is not on your QVL it may not run. I happened to get a DOA stick, but I'm not taking away a star from the product for this. It can happy with even top of the line memory. I want to address some common issues for those who are concerned about other reviews. Will this RAM run at 4000mhz? Only in XMP. That's normal for all DRR4 though. Some motherboards have XMP I and XMP II. This set ran fine on both for me and this kit is actually not on my QVL. However memory or the same speed and capacity by GSkill and memory up to 4400mhz works at 1.45v. Sometimes you need to take an educated guess if it will work in XMP If the kits not on your QVL. Say all kits of that size, speed, CL, and voltage are only supported in 2 dimms not 4 it may be safe to avoid that kit. However with mine that wasn't the case. Will this cause my system to crash? It could! I generally suggest running memtest86 without XMP first. If it passes run it with XMP on. If it passes, try getting into windows. From there you can increase your CPU power phase to 4 or more and sync all your cores. XMP used to do this automatically in the DDR3 days anyhow. Since it's no longer automatically in the profile, memory has a broader support. This memory says it's for AMD. Ryzen systems arenvery particular about memory configurations and being the current platform of choice over intel G Skill markets this as "Ryzen Ready". A few generations they would do the same, but for Intel. "Core i7 Exteme ready". I have a 10850k on Z590-A and XMP worked just fine. I did run a hammer test which lower quality memory will fail. It's worth noting this passed with flying colors! Great ram with insane performance. Works with AMD and Intel. Works great with motherboards RGB configurations. Easy to configure. Stable XMP profiles. What else can you ask for!? Update: I am not removing a star for this but I do want to point out that I did have to swap to 3600mhz CL16 1.35V rather than 4000mhz 1.4v CL18. To be supported at XMP 2.0 and 64GB Asus Z590-A does better with XMP profiles at 1.35v.

I could not OC it over 3600MHz on ASUS TUF Gaming X570-Pro WIFI II motherboard. I could of get Mushkin with lesser latencies and saved like €100. All this nice packing and LEDs does not make it work at 4000MHz. Be careful guys.

muy buenas memorias muy rapidas y si las volveria a comprar para mi proxima pc ...

This is not compatible with Ryzen even if you spend 6 days overclocking and adjusting timings to whatever extent, games will crash, system will not boot properly & performance is as good as a 3200 kit, dont waste your money on this EDIT: i managed to get it to run on 3600 Fast timings stable, for anyone interested in tuning this using Ryzen Dram Calcualator here is what worked for me after a long week of testing: is a single rank DDR A3/A2/B2 Hynix CJR/DJR 3600 Fast timing, I'm still testing the 3733 SAFE, fast timing crashes. RE-EDIT: Leave at stock clocksd of 4000 but do not change the Infinity fabirc speeds or wont boot. as simple as this