PIT66 3rd Brake Light Compatible with 2004-2008 Ford F150

Nice product, i got what i paid for and happy with it.

This was the correct replacement for my truck. Easy to install. The only thing better would be if the bulbs came with it. Had to go buy bulbs. Good quality material. Saved a lot of money compared to buying at auto supply store.

This is the first aftermarket automotive part I have ever bought that was plug a play. What I mean by that is this plug hooked right up to the plug inside my vehicle. But there’s a trick you have to look inside the opening that the light goes into. You’ll see two white pins. You have to push those pins through the hole to get to the electrical connector. It will take you a few minutes. It took us 10 minutes and we unplugged the old light and plugged in the new light and it works perfect. On a sidenote, I have never ever been able to buy an aftermarket part, especially electrical and have hook up with no issue except for this one and this one works.

The wire harness clip included with this light was useless as my vehicle had a completely different set-up: wires went directly to each light. I cut the clips off and hard wired them in. The hardest part was getting the old factory tape off the brake wires because I didn’t have much to work with. The cargo lights had plenty of slack. The neutral on my truck was all black, power to the cargo lights was black with a white stripe, and the brake light was green. I matched black to black on the new light, black with stripe to blue, and green to green. I attached the included seal directly to the new light before wiring and I used my old mounting screws. This worked perfectly for me. The brake light wires were the problem because of length. I wish I had a quick connect ready for those.

Great product overall, matched the OEM assembly very closely. Was kind of a pain to install, but thats a ford problem, not the sellers issue. After fighting with wires in a cramped space i got them loose and got the new assembly plugged in. It worked great! It is a true plug and play option for a 2007 ford f150 5.4l xlt. The foam seal smashes down and forms a water tight fitting, just dont be like me and overtighten your screws without letting the foam heat up a bit. With heat it smashes down easier, and will save you from cracking ever so slightly around the tightened holes. The brightness is great, and in my opinion a step up from the OEM setup. Only gripe is there is a clear coat on the plastic i’d recommend hitting with meguiar’s PlastX, and finishing off with a quick wax as a protectant(or a ceramic wipe if you have that option). Overall would recommend buying.

Just as good as the factory one

Perfect and easy replacement! Fit my 2006 Ford F150 SXT just right with a the exact right power connection.

Nice light