– BoYata Laptop Stand, Height Adjustable Laptop Riser for 11-17" Laptops

The product was well packaged on arrival. The parts are neatly tucked between foam packing dividers (see images) which did a great job in preventing any damages during shipment. Upon opening the box, it was clear that this product required assembly before usage. I was hoping that all the tools required to assemble were included so that I didn't have to bring out my toolkit. This product didn't disappoint. In the box, there is a bag with 6 hex screws (4 required for assembly and 2 spare). The bag also came with a hex key for assembly. Putting the stand together was as simple as lining up the extruded parts to the base with the slots of the pillar. Once lines up, you just screw the hex screws with the included hex key in the corresponding holes. The instruction sheet is very clear on assembly, so it shouldn't be hard to figure out. The steps for the laptop holder/panel is the same. Just line it up, and screw in the hex bolts. It's that simple. Build quality is very impressive. The full body is made of metal. There are no issues such as flexing in the metal plates. The base has rubber contacts which help grip the stand to the desk as well as protect the desk from rubbing against the metal. The laptop holder also has thick rubber contacts which leave me confident in placing my laptop on top of. The stand is height adjustable with a thumbscrew on the back. The screw-head is plastic but still of good quality. The adjustment screw has ridges which make it easier to grip on to whilst turning. The metal has a nice, smooth finish to it. The laptop I have tested this product with has a 15.6" display and weighs around 2.4kg. This stand had zero issues with this laptop. Overall, I am very pleased with this product's build quality, functionality and aesthetic. Would definitely recommend this to anyone that needs a height-adjustable stand for their laptop to correct their posture, or for anyone who wants to make use of more workspace by elevating their laptop.

Got this stand today as my office space at home is limited to a very small desk tucked into bedroom. I often have a lot of paperwork spread over my desk, as I work from original prints. The problem is my Surface takes up too much room (on my tiny desk!) and I often have to overlay the keyboard. Not anymore, this stand fits the Surface perfectly and certainly doesn't feel like my device is going to fall off at a moment's notice. Seated or standing the stand provides a great angle to work at, and for the camera for the inevitable video calls. Its very sturdy and is a well machined piece of kit, with a full metal construction I'm sure can handle some seriously heavy loads. To assemble it takes moments and the allen key is provided, so no need to go hunting in your tool box. Four screws and you're ready to go. When I finally return to the office I'm taking this with me, its brilliant.

Surface to bottom of laptop (true maximum raise) 14cm at the front, 19.5cm at the rear Base WxD=22.5x19.5cm (15cm from base of pillar to front) Top WxD=29.5x24.5cm (19.5cm space between limbs, each limb 5cm width) Thickness of material about 3mm Plus - easy to assemble (small allen key included plus 2 spare screws) - sturdy and stable (has some elasticity but in normal usec-typing- it feels totally stable) - good size 29+cm width is almost as wide as my 14 inch laptop - looks good - good feel of adjusting screw (soft stop) - seems like good quality material and finish and all metal construction - it should last forever - convenient and easy to use space under top to store (papers, pbone, mouse, box, full headphones etc) Minus - no tilt adjustment and no rotation (not really an issue but could be a problem for someone with very specific needs) - it covers partially my speakers and air intake - no cable management options (a couple of slots to run a tie wrap or a velcro strap would be nice) - lightweight material but not lightweight contruct - will not fold flat, can be easily disassembled but not really portable, it is a permanent stand It feels so good I am trying to justify buying a second one.

It’s easy to adjust the height and angle of the stand with the buttons on the back, and it feels very stable and secure on my desk. The rubber pads on the top and bottom prevent any scratches or sliding, and the U-shaped design allows for better airflow and heat dissipation. The stand also looks sleek and stylish, and it doesn’t take up too much space. Pros: 1. Sturdy and durable metal construction 2. Height and angle adjustable to suit different preferences and postures 3. Rubber pads protect the laptop and the desk 4. U-shaped design improves ventilation and cooling 5. Compatible with various laptops up to 17 inches 6. Easy to set up and use Cons: 1. A bit pricey compared to some other laptop stands 2. May not fit some thicker or heavier laptops 3. No cable management or storage features Reasons to buy: -If you want a high-quality laptop stand that can support your laptop securely and comfortably -If you want to improve your ergonomics and posture while working or studying on your laptop -If you want to prevent your laptop from overheating or throttling Reasons to avoid: -If you are on a tight budget or looking for a cheaper alternative -If you have a very thick or heavy laptop that may not fit or balance well on the stand -If you need extra features like cable management or storage space

Very impressed. Great quality, great build, sturdy, 10/10.

Good product. Well made and all of the edges are smooth. I have 15 inch gaming laptop. I should have realised the arms would sit directly underneath my intake vents. If like me you previously had your laptop on a grilled wedge to allow for airflow, you may be disappointed by this. I will probably get some thicker padding to raise up the rear. It works putting my Targus wedge on the stand, but creates a much steeper angle and means my laptop is hooked on by its rear feet. Not a criticism of the product. As stated it is designed for a range of laptop sizes so needs to be small enough for a 10 inch meaning my 15 inch overhangs either side. Something I should have considered. If I was to buy again I would either try and find one designed specifically for a 15 inch laptop, or more likely a 17 inch to guarantee clearance. Or one with an adjustable top plate I could level off or set at a shallower decline to better accommodate my existing wedge stand. May not be suitable for a 17 inch laptop, but i guess it would be dependent on the position of your laptop's feet as I've seen some positive reviews for 17 inch laptops. My rear feet only just sit on the rear pads. Another 5mm and they would miss. Another 10mm and they would be off of the stand altogether. I have an Asus A15 Not a problem for standard laptops, but a gaming laptop under stress ideally needs good clearance to pull in air and reduce stress on the fans

We recently purchased four Boyata adjustable laptop stands for our office, and they have exceeded all our expectations. Assembly was incredibly easy, practically effortless, making the setup so easy . The height range is excellent, allowing for perfect ergonomic positioning. The stand itself is made from high-quality materials, giving it a sturdy and premium feel. Not only has it improved our workspace organization, but it has also enhanced comfort and productivity. Highly recommend to anyone looking for a reliable and well-designed laptop stand.

I’ve ordered this item several times. It is sturdy, its material looks nice. The flat design of the bottom gives you the space to push the excesses that occur in time on the table under the computer. And, it holds the computer well. In my house, this is being used for both 14’ and 15.1’ laptops and works well with both sizes.

Great stand. Easy to assemble, took like 2 minutes. Sturdy! If I wanted to, I could type on my macbook pro 16" while on the stand with minimal shake (but of course it's much more ergonomic with an external keyboard). Has saved my neck when I work at my desk! Love that the height is adjustable. Well made item and super happy with it. Also looks good on my desk. 5 stars!

Tout à fait conforme à mes attentes.

Wykonanie, stabilność, funkcjonalność - rewelacja. Polecam

Este soporte es un accesorio imprescindible para aquellos que buscan combinar ergonomía, estilo y funcionalidad en un solo producto. Hecho de aluminio resistente, ofrece una base sólida que promete mantener tu portátil seguro y estable, sin importar el fervor con el que teclees o navegues. El diseño de este soporte es una de sus características más destacables. Elegante y minimalista, encaja perfectamente en cualquier entorno, desde una oficina profesional hasta una configuración de teletrabajo en casa. Su acabado en aluminio pulido no solo añade un toque de clase sino que también ayuda a disipar el calor, manteniendo tu portátil fresco durante largas horas de uso. Una de las grandes ventajas del soporte BoYata es su capacidad de ajuste. La altura e inclinación se pueden modificar para adaptarse a las necesidades ergonómicas de cada usuario, lo que ayuda a reducir la tensión en el cuello y la espalda que suele acompañar a largas horas frente a la pantalla. Esta característica es especialmente beneficiosa para aquellos preocupados por su postura y bienestar durante la jornada laboral. Además, el soporte cuenta con un diseño pensado en la organización del espacio de trabajo. El espacio adicional debajo del soporte puede usarse para guardar teclados, ratones o cualquier otro accesorio, ayudando a mantener un área de trabajo ordenada y libre de desorden. En cuanto a la compatibilidad, el soporte BoYata es bastante versátil, capaz de acomodar una amplia gama de tamaños y modelos de portátiles, lo que asegura que casi cualquier usuario pueda disfrutar de sus beneficios. En resumen, el soporte para portátil BoYata ofrece una combinación ideal de diseño elegante, construcción duradera y funcionalidad práctica. Ya sea que estés buscando mejorar tu ergonomía, organizar mejor tu espacio de trabajo o simplemente elevar tu portátil para un mejor enfriamiento, este soporte es una excelente inversión que sin duda cumplirá y superará tus expectativas.

Rien à redire, rempli sa fonctionnalité. Fait assez robuste. Très pratique car la hauteur est réglable, parfait pour mettre l'ordinateur portable à la même hauteur qu'un écran secondaire. Visuellement assez jolie, s'accorde bien avec un macbook de couleur métallique.