Sewinfla Inflatable Paint Booth 12.5x11.2x11.2Ft with Blowers (370W+550W) & Air Filter System Portable Paint Booth Inflatable Spray Booth

I got the 28ft booth and this thing is awesome! As i was spraying a hood i made, the neighbors came over to check out the booth. It's super impressive in person! Helped me get great results and i cant wait to paint the car in it when the bodywork is done. Ive always sprayed cars outside or in the garage and this is a much better way. Since i have a big compressor in my garage, i used a hose extension and left a tiny gap in the front zipper so i could snake the hose through. I did not use the clean room in the back. I almost wish it was offered without it as i would rather the extra space, but no big deal. Takes about 5-10 mins to blow up. Airflow is pretty good. Sometimes overspray can hang in the air for a little bit but not bad. Taking it down is a little bit of a pain. Rolling it up and bungee-ing it in a roll is the easiest way. The sheer convenience of this thing makes it worth every penny. No more taping off the entire garage to paint! One of my blowers arrived damaged with a small crack. Without hesitation Sewinfla sent me another one. Awesome customer service! I also got another box of replacement filters, even though they come pre-installed. Thank you guys! Ill try to add more pics as I do projects in it. I will try to put one up of my car in it so you can get an idea of the size. It's a chrysler 300 so it's pretty big, but there should be no problem fitting it in this massive booth! UPDATE: Booth was plenty big for my 300. I painted the hood and bumper separately so i didnt have to worry about the front. Only other gripe i had was the air inlet for some reason always flaps around like crazy. If you push the blower closer it will inflate it properly and stop flapping, but inside the booth the inlet folds over and obstructs the airflow. I left the cleanroom door open to get more air because when spraying clar it creates a nasty fog that i wanted to getbrid of asap. Overall, this booth is worth every penny!

I purchased the 13 x 8.2 x 8.2 unit in January 2021. The booth arrived and the blowers arrived a few days later. I inspected the booth and everything looked great. I set up the booth on the driveway, it was perfect for my projects. It stayed strongly inflated with the access door or main door open (needed to move tables and projects in and out). I used the booth extensively for spray painting (about 7 days every month) from February to December 2021 and had no issues. Based on the amount of painting, it held up quite well though it does accumulate paint dust. I used a leaf blower to periodically (about every month) blow the loose dust out of the unit otherwise it would end up on my paint projects. I've replaced the carbon and fiber filters once. Then in January 2022, the booth would not stay inflated if the door was open. This causes a problem when transferring project pieces into and out of the booth. It would stay inflated only if the doors were kept closed and the filter covers were in place except for a small corner. I inspected the booth for tears and could not find any. I checked the seams, they looked ok. I checked the fan speeds under load and they were fine, there was no blocking of the suction or discharge ports. I sent an e-mail (to the e-mail address on booth placard) to Sewinfla requesting advice on how to rectify the issue. I did not received a response after a week. I resent the e-mail, still no response after another week. I ordered a higher volume blower to see if that will work and I am waiting for its arrival. If that does not solve the issue I will look to get a different booth as I have lots of paint work coming up. I initially would have given this product a review of 5 stars but based on the issue I am currently having and the lack of response from Sewinfla requesting ideas on how to fix the issue (just tell me what I should do to fix the issue), I'm giving this product 3 stars. UPDATED REVIEW: A Sewinfla representative finally e-mailed me and apologized for the delay in response to my e-mails. They reviewed the issue and came to the conclusion that since I use the tent extensively that the sealing of the air pipe has been reduced - corrective action is to use a higher-powered blower (which I have already ordered). However they also mentioned that a higher-powered blower will reduce the useful life of the air pipe. They offered a replacement tent at a discount. I did purchase the replacement tent as I continue to have paint projects and I will continue to use my old booth with the higher-powered blower until the replacement arrives. Result: If you use the paint booth a lot like I do, it will degrade over time to the point it will not continue to stand due to air loss through the fabric. Considering that it is constructed of fabric I would expect that. I am revising my review to 4 stars since Sewinfla did respond with a suggested solution and I still am planning on using the product.

This worked surprisingly well. I made an internal 2x4 frame so I could turn off the fans without collapsing the booth. I used the elephant trunk and external exhaust fan and hose. For inside spraying the elephant trunk makes things easier but not 100% necessary

Very fast going up. Trying to figure out a way to remove all air so folding up for storage is easier. Have no complaints. For the money and size of this booth it was worth the money. After every paint job it is a good practice to blow and gray scotch the inside walls to remove over spray from accumulating on the walls. Use a tarp on the floor and with those practices you should have a booth for many jobs. For complete paint jobs i would definitely recommend buying the two exhaust fans and hood, to keep the right air flow going when clearing or you end up with a foggy room and cant see.

After being deployed for almost a year, these guys still gave me a full refund on a very well constructed paint booth. It’s not made of cheap materials and is exactly as advertised. You won’t be disappointed, it’s well worth the cost. Nothing bad to say about this product or customer service. Thanks