Sparco Opc04060000 Alu Racing Style Crankset, Aluminium/Black

Doing what they supposed to do. Good sturdy pedals.

Ok

Bien épais et solide, vis founis.

Great

Neat pedals - but again I bought them to match the Sparco shifter to go on the T3PA-Pro pedals on the T300RS. They're slightly more of a curved surface than the stock T3PA-Pro pedals provide, but they fix fine with no movement whatsoever - you just have to be slightly more careful when tightening them as the screws already with the rig must be used (those supplied are too short by a way) but the heads of the screws don't precisely fit into the middle of the holes when tightened (the screws themselves thread with zero problems I must add). But they don't require mechanical adjustment to fit. You just simply have to have the screw highest up the pedal almost entirely flush/perfect fit and the lower one slightly less so - they is ample tightness there for proper use and the screws don't protrude - it's just that when tightened they don't sit absolutely central in the recess hole in each pedal - a minor cosmetic thing that you cannot notice when you're using them. As they are holed down the central left and right sides (rather than dead down the centre as the stock pedals are) you are going to have to attach them slightly one side or the other of the pedal base - but they leave no pedal behind them so fit perfectly - just ever so slightly to one side. Just be careful you don't over-tighten the lower screw in each pedal as because the screw head doesn't sit entirely central in the screw hole on each pedal, over-tightening will likely cause the screw head to bend ever so slightly. You can easily tighten them firmly without this happening whatsoever - you just need to not get overzealous. They have a lovely brushed aluminium feel to them and looks really smart without being overly showy. Recommended.