Moen 159560, Replacement Hose Service Kit for Moen Pullout Style Kitchen Faucets

My faucet was included with my house when I moved in, and I never bothered to find out what model it is. When my sink cabinet started caving in at the bottom, I went to the MOEN website to find out my model and discovered I am the proud owner of the Banbury pull-out faucet. I was planning on replacing the faucet but seeing how expensive the stupid thing is I felt stuck with just fixing it. The website helpfully pointed me to this part number and confirmed it would work with my part number, so I ordered without doing much reading. This hose is smaller in diameter and has a plastic connecter instead of the original brass (as many reviews have stated) and so originally I thought they had sent the wrong part. After looking through the reviews and seeing this is normal, I installed the thing easy-peasy (aside from the blind groping behind my sink trying to find the quick-connect) and the faucet works as normal. There isn't a noticeable loss of water flow/pressure, but I must admit I didn't meter my water flow before I changed the hose because who does that. Overall 10/10 hope I never have to buy again; also @seller please add a note somewhere that Moen changed the hose design since it was sold with the original faucet.

The package said 205697 NOT 159560. But after a quick call to Moen customer service - they confirmed that 205697 is the current replacement part. It was very easy to change out the hoses and Moen customer service continues to be top notch!

This replacement hose had a different part number on the package than was what is listed in the description. However, I did see that addressed in the Q&A section. The hose itself is about half the thickness of the original hose and noticeably lighter and stiffer. It is about the same length. The swivel that connects to the hand wand is smaller and a different color, but seems to be of comparable quality. The quick connect end is compatible with the Moen female receptacle, but it is made of nylon rather than brass like the original. That being said, it was very quick and easy to install and seems to be working perfectly thus far. I am still puzzled as to why this seemed to be the official Moen store, but the actual part appears to be a knock-off. It's possible they (Moen) have changed the design/quality since I purchased the original faucet (approx. 4 years ago). But again, so far it was perfectly compatible, installed in under 5 mins and works flawlessly so far. I gave it 4 stars due to the fact this could be false advertising.

Moen has apparently updated their design. The new design looks like something you'd find at dollar tree. I missed the reviews on amazon where other's are complaining of the smaller hose and all plastic fittings. I ended up finding a review on Moen's website where Moen responded 3 years ago about needing to update their picture to reflect the new design and they still haven't updated it. Amazon needs to update theirs too as I'm sending this junk back and buying a cheap generic brand that's made like the original.

I got this hose because my current hose started leaking. After trips to Home Depot and Lowes I realized their universal pull-out faucet sprayer hoses would only attach to a sprayer wand with 1/2 inch threading, and my original wand had a smaller threading. I ended up buying their universal sprayer wand so their hose would fit. After trying to install the new wand and hose, I found that their hose would not fit through the hole in my faucet. So, I went on amazon and found this hose. Another reviewer said this one had a smaller fitting, so I gave it a try. When I opened the package, it looked identical to my original hose and installed easily. My pull out sprayer works perfectly now, no leaking. For reference, the threading that hooks to the sprayer is 3/8 inch on this hose.

Nice, authentic item. Seems these types of hoses are updated often and it won’t look like the original that came with the faucet. The hose will be thinner but works great.

I am writing this to maybe help people out so they don't have the same problem I had. I was not sure which faucet I had since the builder was the one that installed it. So I searched the internet and found a Moen Kinzel. It looked identical to the faucet I had except it was taller (I later found my faucet, it is a Camerist). So I looked at the parts list and came across part number 150259. However, once I received the part and replaced my existing hose the handle would no longer seat into its resting spot. The female fitting on the end of the hose was too big. So back to searching and I came across another number Moen 159560 (this part). It looks identical, so I ordered it and it works perfectly. The attached pictures will show both faucets and also the female side of hose P/N 150259. If you remove your hose and look at the end and it looks thinner than the one in the photo and has no knurling on it. It is probably this hose. Hopefully this helps.

It works but the diameter of the hose is smaller so it doesn't slide in and out as easily. Also if you want to keep your water pressure higher, find another horse with a larger diameter. My sprayer sprayed harder with the original equipment but this still does the job ok..

C’est vrai qu’il est plus petit en grosseur mais c’est mieux, il se manœuvre plus facilement et rentre aisément. Très satisfait et s’installe en 2 minutes. De plus même si plus petit aucune différence sur la pression. L'original a fini par fuir et je suis pas le seul c'est le cas de beaucoup de commentaire, donc tant mieux s'il est pas identique a l'original, ils ont peut être régler le problème l'avenir nous le diras...

I got this to install on a Moen CA87326C faucet. As others mentioned, the diameter of the hose is smaller and the fittings are plastic, not metal, but it fits perfectly and I agree with others that the slimmer hose actually works better. Recommended.

Value is alright and quality seems ok, but the product is different than the one in the picture. First both couplings (both ends) are plastic. Second the diameter of the hose is smaller. The one I replaced is identical to the one in the picture (metal coupling to the faucet, yellow marker for middle). It fits perfectly BUT users would have to either skip the weight that attaches to the hose or do some DIY modifications (the outside diameter of the hose is smaller than the inner diameter of the weight in the hose I replaced). No a problem if clearly stated, but annoying as the pictures are false advertisement.

I ordered this hose to replace the leaky one on my Moen kitchen faucet. In the picture is the genuine Moen replacement part but that is not what I received. Even after going through the return process for receiving the wrong item I was still sent a cheap knock off that is about half the length it should be, not even long enough for a pull out faucet. Not to mention the cheap plastic fittings that I would never expect to last.

Moen's are suppose to be Guaranteed for life, but when your hose springs a leak, you would be without a kitchen sink for a month. With Amazon, I was back in business within a day. The moen hook up is so easy, push button disconnect, undo from wand, reverse for replacement. easy. Shut off water , which hopefully is under sink.