UGREEN Tablet Stand 360 Adjustable iPad Stand Lazy Phone Holder iPad Holder Hands Free Flexible Tablet holder Compatible with iPhone 15 Pro/Pro Max iPad Pro Mini iPad Samsung all 4-12.9"

i have bought and used this with an iPad pro 12.9 inch. and it works just fine. more than fine to be honest. im really happy with this purchase. i have a small issue with the rotation of the whole arm around its axis. if you keep it loose it can easily be removed during adjustment. and if you tighten it, it will not rotate and forcing it will damage the axis. i have kept it loose not and would only tighten it once i choose the perfect position. nonetheless, this is one of one of the best if not the best purchase i have made on amazon.

It is very good and practical. I’m using this for iPad pro 12.9. Here are the pros and cons of this product. Pros: it is flexible and stands in place when needed Cons: the base of the arm gets a bit loose after sometime of usage. The plastic screw is easy to break. And the most annoying thing is that you can’t attach and charge apple pencil (2nd gen) unless you take the ipad out.

Bought 2 at once for me and my son Really sturdy and made of good quality materials Does what it should and used it for light iPhone and heavy iPad and both works great 👍🏻 Recommended

Very good and strong But only for phone size Not for iPad 9.7 inch

I am a fan of UGREEN product, generally you can trust them for their quality however this particular product, i am so disappoint hence for my fellow buyers who wants a short answer, JUST DONT BUY IT, Below feedback is for UGREEN so they can improve the design and make amendments for their future production Below mentioned are few flaws i have mentioned but there are few more which are not mentioned here 1.Arm attachment to base is too poor, one should be careful while tightening as the metal is too soft to bend with minor tightening it will puncture the metal pipe, and technically this will damage the product because the screw tip is directly holding the pipe, to put in another word the people who design had no brain at all, 2. One of the major flaw is that it does not have horizontal rotation at second spring position 3. Another major flaw is that it requires a good space around its base point as it extends out from its base point so if you have any wall or cabinet around your desk you need to consider a good enough gap

I had a similar tablet holder which i broke and the biggest problem i faced was i could attach on the bed because of the space between the wall and bed. This product is a very good built quality product and the bestttt part is the maker have given 2 different places for the stand to be attached which enables the user to attach it over the bed and makes it perfect to view in all the angle while you are lying on the bed. Overall, worth the money spent and premium quality with very fast delivery.

Waste item

I’m very happy with this purchase, the material and quality of this product is pretty good. What i like about this product is: 1. The clamps: easy to install and have grip mechanism. 2. Unlike other cheap brands this one can be easily positioned and it will REMAIN where you positioned it. 3. Material: nice and solid.

Não atende a todos as posições mas é razoavelmente firme se não for usar ativamente

pensavo fosse una robina da niente: invece è super robusto e veramente molto versatile: - la molla reggi-tablet/telefono è facile da aprire ma blocca molto bene il tablet - il morsetto di fissaggio è si di plastica ma molto massiccia e non si deforma anche stringendo forte la vite, cosa che rende possibile fissarlo con tranquillità a qualsiasi piano. - la vite del morsetto è di metallo: fondamentale per stringere bene. La parte di morsa in fondo alla vite ha una base di appoggio molto larga e coperta da una gommina morbida, che evita di intaccare braccioli, tavoli, scaffali, ecc. - la rotazione del braccio rispetto al morsetto può essere bloccata con una apposita vite di serraggio: molto comodo se uno poi vuole pigiare sul touch screen con na mano sola senza che il tablet se ne vada via, oppure se lo si vuole montare su un piano non perfettamente orizzontale. - il morsetto puo essere montato sia su un supporto orizzontale che verticale, ci sono due fori separati per inserire il braccio snodabile. - il braccio si muove bene, le molle sono ben calibrate per tenere il braccio in qualunque posizione lo si metta - lo snodo del reggi-tablet permette di girarlo in ogni posizione (o almeno in ogni posizione io abia voluto metterlo!) - il tutto regge senza problemi un ipad da quasi 1 kg. - unico difetto, probabilmente inevitabile: se avete il sensore di impronte digitali sul retro del telefono, è praticamente impossibile usarlo dopo aver messo il telefono nella morsa, ma non credo ci siano bracci snodati che risolvono questo problema. Considerato infine il prezzo (20€), io ero veramente convinto arrivasse una cosina sdingolante e precaria, mentre è proprio un ottimo prodotto.

Ich habe ein 8,4 Zoll Tablet mit ca. 400g Gewicht. Bisher bin ich mit dieser Halterung zufrieden und macht auf mich eine stabilen Eindruck (bei richtiger Montage nach Anleitung - siehe "2. Nachteil"), wobei ich Diese erst seit 30 Tagen habe (25.05.2019). Um auf der sicheren Seite zu sein habe ich extra eine Halterung gesucht, die mehr verträgt (kompatibel mit iPad Pro 12,9" 631 Gramm). Dadurch erhoffe ich mir mehr langlebigkeit. Bei anderen Rezensionen wurden Halterungen an der Grenze oder sogar über der Grenze benutzt und wurden nach einiger Zeit (aus meiner sicht verständlich) unbrauchbar. Jetzt zu meinem Eindruck zu der Halterung: 1. Nachteil: Aufgrund der Länge der Halterung gib es beim Schreiben auf der Bildschirmtastatur kleine Schwingungen. Abhilfe: Bei kurzen Texten stütze ich das Tablet mit der zweiten Hand. Bei längeren Texten nutze ich eine externe Bluetooth-Tastatur bei falscher Montage ohne Anleitung: 2. Nachteil: An der Steckverbindung zwischen der Klemmhalterung und dem Haltearm scheint es bei falscher Montage eine schwache Stelle zu geben. ( Es gab eine Beschwerden in einer Bewertung die ich nachvollziehen kann ) Abhilfe: Der Haltearm sollte immer von oben in die Klemmhalterung gesteckt werden und niemals seitlich. Dadurch wird die schwache Stelle nicht belastet. Wer mit diesen Nachteilen und Abhilfen zurecht kommt, für den kann ich diese Halterung empfehlen. In dieser Preisklasse (26€) habe ich für Tables mit 400g meiner Meinung nach nichts besseres gefunden (Stand 23.04.2019). Die Länge des Haltearms war mir auch wichtig. Wer besseres sucht, muss vermutlich mehr ausgeben oder andere Abstriche machen. Für mich überwiegen die Vorteile, weshalb ich die Halterung hoffentlich lange behalte werde. - Vorteil gegenüber Schwanenhals: Gelenke statt biegen von Material -> Materialermüdung ( Wobei hier Federn sind, die eventuell auch irgendwann ausleihern können.) - Außerdem soll der Schwanenhals bei Berührung sehr nachschwingen. - Diese Halterung kann außerdem problemlos fast horizontal ausgerichtet werden, was bei 75cm bei keiner Schwanenhals- Halterung funktioniert. - Die Federn halten die Position, sodass die Fixierschrauben keine Belastung haben. Für mich ist das sehr bequem. Bei mir sind die Fixierschrauben immer locker, wodurch ich den Arm der Halterung schnell verstellen kann. Zum Beispiel, wenn ich meine Sitzposition wechsel. Verbesserungsvorschlag: Bei 75cm ist eine vernünftige Kabelführung für das Ladekabel von Vorteil. Deshalb habe ich improvisiert und die Fixierschrauben an den Gelenken passend gedreht und benutze diese als "Kabelführung".

I just received this today as I'm working from home and realised that also trying to study and use my Microsoft I should really have it at head height to ensure I'm sitting and working with the correct posture as much as I can. Set up was easy enough to do. The surface pro 4 is probably a little bit heavy (796g roughly) for the arm but it will hold it if you get the angles right. Any slight changes and the arm will droop but it's easy enough to adjust to get everything back in the air again. It seemed like the best choice of arms available that would hold my surface pro 4. Service was prompt too so very happy with that. UPDATE: 6 months plus later. Still incredibly happy with this purchase for my Microsoft Surface Pro 4. I can leave the arm positioned high up and it will still be in the same position the following morning. Great for being able to use the Surface Pro as a computer monitor with ability to plug in a keyboard via the USB port on the side or for those who prefer using a Bluetooth keyboard. Update: over 1 year on. Still really happy with this. It's still very sturdy and stable for using my tablet as a computer and saves me from so much neckache.

I’ve been using this to hold my iPad, and it has been absolutely revolutionary. I love the industrial look of it, and I found I could thread a Lightning cable through it without the arm losing much mobility at all. The grip on the device is tight, and the device can be rotated 360° with no loss of stability (obviously my cable could get twisted, but that’s just my own particular setup). The arm is extremely manoeuvrable but still fairly rigid so that it doesn’t suddenly drop or lower your device. I disagree with the guy who used it to read his Kindle in bed; I use it for my iPad at all sorts of angles and never had a problem. My only possible suggestion for improvement would be regarding the clamp: it’s plastic, and it’s only attached to the arm with a small bolt that tightens into a groove in the arm, so with a lot of movement it’s possible the bolt could come loose or the plastic could crack, though I haven’t seen any evidence of either phenomenon. There’s also the very minor annoyance that the top grip of the clamp is completely flat, so if the surface you clamp to has a ridge on the edge, like mine does, the clamp won’t actually be gripping to much surface area at all. Mine still seems pretty sturdy, though, even though it isn’t gripping to very much. Overall a good quality product that does exactly what I wanted it to do.