GEN 4 Scope Mount for Standard Mount CNC-Machined 6061-T6 Aluminum – Return to Zero – Ultra Rugged Construction

Still holds zero , even after I take it off and put it back on . Seems to be a little lighter than the rest I have but still sturdy to do its job.

Fits well. Returns to zero when removed and reinstalled. Solid built design.

Mount works great and it rock solid, once you have it mounted right. If the locking lever is hard to close and doesn't close completely, flip the leaver around and try it that way ( you can do this by opening it so it's pointing directly away from the mount, pulling down slightly, and twisting ) Mine had to close towards rear of the mount to lock solidly.

This scope is definitely top notch quality. For the ones that comment about it falling off, the nut on the top of the tightening lever HAS to be adjusted before it can be adjusted to the side plate of the rifle. Maybe I received a good one it mounted tight and straight to the bore. This one is just as good if not better than one costing 3 times as much. At the end of the day they all come from china.

Average mount works for red dots that are lite.

I bought this mount because I wanted to test out modern optics on an AK platform without dropping several hundred dollars on a mount from a company like RS Regulate. Initial impression was very good, the mount was easy to adjust tension on and fitted perfectly to the rail of my WASR-10. The pic rail section itself fits nice and low over the receiver, and while perhaps not perfectly centered over the bore it was perfectly straight and close enough for my purposes. I mounted a compact RDS to the rail and took it out to the range for sighting in. I decided to try zeroing at 25 yards using Wolf steel-case 7.62x39. I shot a three round group and had a nice 1" group that was high and right. I adjusted the sight and fired a second group that was dead on and again about 1". I fired a third group to confirm zero and noticed the first two rounds were nice and tight and the third was more than 2" low. I thought I may have yanked the trigger so I went to shoot another grouping, as I was lining up for the first shot I pressed my thumb against the back of the mount and it simply fell off the side of the rifle. After several attempts to remount and continue testing I discovered that the locking mechanism which prevents the release lever from moving had failed and the mount would not stay tightened down. I would return the mount but I was only able to get to the range and test it three days after the return window had closed. If you are looking for a side mount for an AK type rifle I would recommend trying something with the standard 180 degree side throw lever of the Russian original type mounts.

I was apprehensive but so tired of spending way too much on mounts. Especially with so many AK variants. Usually I fail or just stick with the name brands. This time I didn’t! I mean it’s just a little loose on the rail. I alway use the hex to gauge good closure while opening and closing the lever for final fit. Oil the hardware. Its build is good! It’s level tight and not moving! I’ve got over 500 rounds on it with zero issues other than I routinely check the tightness. Worth it! Score! I saved $60 I can buy one round of 223 now!

I hesitated at first but tried this mount to see what I really thought, I was very surprised at the quality and how tight it locked up on my AR. I have a Century BFT47 and honestly wouldn't hesitate to use this mount on my other firearms. Removed and replaced numerous times and always held a zero. This mount at this price point is of high quality and very durable.