Spill-Proof Lid, Freezer Storage, Kitchen Accessory, Twist To Release, Easy For Stacking, Dishwasher Safe | Spill-Proof Lid, Freezer Storage, Kitchen Accessory, Twist To Release, Easy For Stacking, Dishwasher Safe

Works perfectly, just as promised by Wirecutter. If you use a measuring cup with a pointed spout, such as Oxo's, filling the individual cubes with water is fast, easy, and avoids overfilling. Twist slightly to remove frozen cubes.

I've had this set for 1 year now. I love them, learning curve for me was getting them out. If you over fill them it will be hard to slide the lid gf and what I do to push them out I very gently, twist until I hear a little "pop". When you don't over fill where it creates a layer of water over it or even in the little over fill lines, it's super easy to remove them and I love it so much. Especially if you struggle with joint pain. Oh, under filling is okay to they still push out easily still. Mine aren't cracked or broken, they are still in good condition.

I bought these because I wanted ice cube trays with lids. I don't use ice too often, and when I do, a third or more of the ice has often evaporated since I last used it. This has lids, and the way they slide on and off seems durable -- I don't need to worry about a hinge wearing out or a plastic tab that snaps on cracking off. But I'm taking off a star because they're too wide! They're *really* wide, and just wide enough that they don't fit in my freezer door. I thought the whole point of a freezer door was to hold ice cube trays and pints of ice cream. But my freezer door shelves are 5.5" deep, and this is 5.6" wide. It doesn't fit! What the *heck*, OXO? I've got a super-standard Frigidaire fridge/freezer. OXO should be making sure this fits in standard freezer doors, and they're not. So now I have to take up valuable space from my main, tall freezer shelves instead. As for the crescent shape of the ice cubes, I'm not entirely sold. The problem is that when you push on one end, they don't usually release from the plastic immediately. (And you can't "crack" the whole tray while the lid is on.) So you often have to keep increasing pressure to release it, and then when you do the whole ice cube flies up in the air and then lands on the counter or floor! Finally, there's no clear line to fill the water to. If you fill each ice cube compartment entirely, the water expands and the ice sticks to the lid. So you have to be careful to under-fill it, but there's no indication of what the right amount is. (This isn't a problem in regular trays without a lid.) So overall I think this ice cube tray is headed in the right direction, and I like the lid a lot. But here's how OXO should improve it: - Make it narrower so it fits in standard freezer doors! - Which means making the ice cubes make compact -- more cube-like than sliver-like. I think it's fine for the bottom to be rounded, but make it a full half-circle rather than a sliver. This way the tray is taller, rather than extra-wide - And provide a super-clear fill line for the cubes

Was hard to find one that makes "regular" size cubes locally and finally broke down & bought one at about twice the price which wouldn't have been acceptable at half the price. This one works well although if removed while freezer is at its coldest, you need to wait a minute to empty. The cover is a nice touch. A little too wide for my old fridge, but I can stack them.

I've always gone to this company when I'm needing a(nother) can opener or kitchen gadget. I got hooked on youtube's Epicurious series on "Kitchen gadgets reviewed by a design expert" and I had to find out more about the host, Dan Formosa. Come to find out, he worked with OXO and is a renowned expert on product design, and is in demand through his projects and lectures. He and his team, or whoever he worked with, designed some of the most well-thought out, easy to use products. They're intuitive, innovative, and decidedly superior and I have a kitchen full of OXO products. Here's an example: The sliding covers can be opened at either end, and don't automatically assign a "direction," which is handy. Plus, they snap reassuringly into place and they don't allow leaks. Another is the shape of the cubes: They're not square but rectangular, which allows for the glass or container to be filled but not overfilled. And, they are rounded at the bottom, which allows you to slide the cube out with one finger from both directions. The trays stack beautifully and are good space savers, helpful in my sometimes overstuffed freezer. In short, who would have thought a simple unassuming little item like an ice cube tray could be so beautifully well thought out and geared for human use? I've fought ice cube trays for years, having to run hot water on them and banging, wrenching, and twisting trays and disliking what I had to do just to get some ice. I haven't got a fancy fridge that delivers ice, and these little easy-to-use trays are the next best thing. Very highly recommended! Get 'em, try 'em, fall in love....

These ice cube trays with lids, featuring easy to remove cubes, deliver on ALL the promises. I had been using Joie brand lidded ice cube trays and found it annoying that rarely did a full cube come out of the tray. Ive only used these Oxo trays for one round of ice making so far but 100% of cubes came out whole and oh so easy to remove. One aspect with the Oxo tray’s cubes is that you’d think you should be able to press on either end of the cube and have the opposite end “pop up”. In my limited use thus far, you must press on one side (usually the outer edge) for the cubes to slide up the other side. Please note that this is likely caused by user error (i.e. maybe i over-filled the tray or something). YMMV. The Oxo lids do not attach as tightly as the Joie trays’ lids, so you couldnt call these Oxo trays “spill proof” but so far the lids meet my expectations. I think Oxo offers a “spill proof” version, but the cost of those led me to a little self-chuckle, “Uffda! For one ice cube tray?”. I paid $10.xx for two trays and two lids in late Feb. or early March 2024. P.S. Although not an “expensive” purchase, per se, it’s not lost on me that I’m fortunate to 1) have the oppotunity to buy new ice cube trays simply because my “like-new” existing Joie trays annoyed me (I will wash and donate them); and 2) have the time to write an honest review about something as inconsequestial as ice cube trays. 🙃

These ice trays are fantastic. They are opened and refilled every day at least once. I bought them because I don’t like the smell in our freezer and it affects the way the ice tastes. I originally bought them in August 2022 and I just purchased them again without even looking to see what other options might be. I like them that much. The only reason I’m replacing them is because the hard water stains have accumulated enough that it grosses me out. I should have taken better care of them. But I didn’t. I also may have damaged one in a perimenopausal frustration, unrelated to the ice tray.

I wouldn't buy again. Pros: each comes with a lid . But not very deep, and it's easy to even slightly overfill , causing ice to stick to the lid when you try to open it . When frozen, not easy to pop cubes out, even if slightly filled. Cubes are small.

The OXO Good Grips Ice Cube Tray - 2 Pack is a stellar choice for anyone who regularly uses ice cubes for beverages or food preservation. No complaints here!

Excelente

I know everyone is thinking it’s just an ice cube tray but this is the best ice cube tray I have ever owned. My freezer is always filled so I need a cover for my ice cubes that will also withstand the weight of others things sitting on top. The cover slides off easy and if you have filled the tray properly, the cubes also slide out of their slots. Even if you don’t fill it right, it’s easy enough to bend the tray slightly and that dislodge them. Got it at a great price too. Oxo products are the best!

Cher, mais efficace

A forma é muito prática, fácil de usar e limpar. Ótimo material. Gostei muito da tampa, é útil e desliza com facilidade.