DTECH HDMI Dummy Plug 4K Display Emulator Compatible with Windows Mac OSX Linux (fit-Headless, 3 pack)

Work at 1440p 120hz

100% Perfect! OK …. We all know what it’s like trying to remote into anything with no monitor connected, the resolution is always wrong! Too big, too small, can’t change it, not working!! Well this bag of 3 little puppies made my Mac mini and 2 beelink servers dance to MY drum baby! Good range of resolutions, plug one in, settings, displays, and boom! just works! Right - off to install a RustDesk server in docker ..

Perfect for what I needed, which was to act as a display emulator plug on a server, for the HDMI port. Decent quality and worked as expected.

Great quality, it feels durable and it does the job.

Smart, well made HDMI plugs that produce an EDID of several formats upto and including standard 4K. Ideal for HDMI splitters and remote access to a computer (such as a Raspberry Pi) where VNC or some other remote access client produces a desktop of a pre-determined, low resolution. These were very good value having been purchased in a pack of 3 for £7. Note: You can edit the config.txt file on a Raspberry Pi to force the HDMI output resolution but if that's not convenient, these and a micro HDMI to HDMI cable / adapter are the way to go.

all good

spot on for purpose and allows you to connect to PC's and devices remotely whilst maintaining a sensible 1080P or higher resolution, so during remote RDP or such like sessions - you can maintain a familiar screen layout on the remote device

I'm using it with Nomachine to get a fully working remote desktop for free apart for hardware cost. If you do this with the most recent Nomachine remember to turn of Wayland on the RPi (nothing to do with this adapter, just how the software works).

After setting up my first mini PC with an Intel iGPU as a headless server, I ran into what is apparently a common issue: the PC would not boot into the GUI without a connected monitor. In addition to that, the Intel video driver would not load properly, meaning I couldn't use the GPU for Plex hardware transcoding. And finally, I couldn't RDP/VNC into the machine. It seems like this little dummy plug fixed all of my issues. Linux recognized it as a connected monitor, and now the machine boots properly, the Intel video driver loads as expected and I can remotely connect to the PC. An interesting solution to an interesting problem.

لايعمل

DTECH HDMI Dummy Plug 4K Display Emulator works well. I use one on a headless server with very old and flaky on-board video that doesn't output anything unless a monitor is attached before booting. Using the HDMI dummy plug allows me to boot the server without a monitor attached, and attach a monitor later if needed. Output of 'monitor-edid -v' follows: parsing EDID from /sys/class/drm/card1-HDMI-A-2/edid parse_edid: unhandled CEA mode 97 parse_edid: unhandled CEA mode 96 parse_edid: unhandled CEA mode 101 parse_edid: unhandled CEA mode 102 parse_edid: unhandled CEA mode 93 parse_edid: unhandled CEA mode 94 parse_edid: unhandled CEA mode 95 parse_edid: unhandled CEA mode 98 Name: AOC28E850.HDR EISA ID: IDVed11 EDID version: 1.3 EDID extension blocks: 1 Screen size: 62.0 cm x 34.0 cm (27.84 inches, aspect ratio 16/9 = 1.82) Gamma: 2.2 Digital signal Standard resolution: 640x480 @ 60 Hz (established timing) Standard resolution: 640x480 @ 75 Hz (established timing) Standard resolution: 800x600 @ 56 Hz (established timing) Standard resolution: 800x600 @ 60 Hz (established timing) Standard resolution: 800x600 @ 72 Hz (established timing) Standard resolution: 800x600 @ 75 Hz (established timing) Standard resolution: 1024x768 @ 60 Hz (established timing) Standard resolution: 1024x768 @ 70 Hz (established timing) Standard resolution: 1024x768 @ 75 Hz (established timing) Standard resolution: 1280x1024 @ 75 Hz (established timing) Standard resolution: 1920x1080 @ 75 Hz, ratio 16/9 Standard resolution: 1680x1050 @ 60 Hz, ratio 16/10 (!) Standard resolution: 1600x900 @ 60 Hz, ratio 16/9 Standard resolution: 1440x900 @ 60 Hz, ratio 16/10 (!) Standard resolution: 1280x1024 @ 61 Hz, ratio 5/4 (!) Standard resolution: 1280x800 @ 60 Hz, ratio 16/10 (!) Standard resolution: 1280x720 @ 60 Hz, ratio 16/9 Standard resolution: 1920x1200 @ 60 Hz, ratio 16/10 (!) # Monitor preferred modeline (60.0 Hz vsync, 67.5 kHz hsync, ratio 16/9, 78 dpi) [6/42] ModeLine "1920x1080" 148.5 1920 2008 2052 2200 1080 1083 1088 1125 -hsync +vsync # Monitor supported modeline (60.0 Hz vsync, 98.7 kHz hsync, ratio 16/10, 104x119 dpi) (bad ratio) ModeLine "2560x1600" 268.5 2560 2608 2640 2720 1600 1603 1609 1646 -hsync +vsync # Monitor supported modeline (60.0 Hz vsync, 88.8 kHz hsync, ratio 16/9, 104 dpi) ModeLine "2560x1440" 241.5 2560 2608 2640 2720 1440 1443 1449 1481 -hsync +vsync # Monitor supported CEA modeline (120.0 Hz vsync, 135.0 kHz hsync, ratio 16/9, 78 dpi) ModeLine "1920x1080" 297 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync # Monitor supported CEA modeline (60.0 Hz vsync, 33.8 kHz hsync, interlaced, ratio 16/9, 78 dpi) ModeLine "1920x1080" 74.25 1920 2008 2052 2200 1080 1084 1094 1125 +hsync +vsync Interlace # Monitor supported CEA modeline (60.0 Hz vsync, 45.0 kHz hsync, ratio 16/9, 52 dpi) ModeLine "1280x720" 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync # Monitor supported CEA modeline (59.9 Hz vsync, 31.5 kHz hsync, ratio 3/2, 29x35 dpi) (bad ratio) ModeLine "720x480" 27 720 736 798 858 480 489 495 525 -hsync -vsync # Monitor supported CEA modeline (59.9 Hz vsync, 31.5 kHz hsync, ratio 4/3, 26x35 dpi) (bad ratio) ModeLine "640x480" 25.175 640 656 752 800 480 490 492 525 -hsync -vsync # Monitor supported CEA modeline (50.0 Hz vsync, 56.2 kHz hsync, ratio 16/9, 78 dpi) ModeLine "1920x1080" 148.5 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync # Monitor supported CEA modeline (50.0 Hz vsync, 31.2 kHz hsync, ratio 5/4, 29x43 dpi) (bad ratio) ModeLine "720x576" 27 720 732 796 864 576 581 586 625 -hsync -vsync # Monitor supported CEA modeline (50.0 Hz vsync, 37.5 kHz hsync, ratio 16/9, 52 dpi) ModeLine "1280x720" 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync # Monitor supported CEA modeline (50.0 Hz vsync, 28.1 kHz hsync, interlaced, ratio 16/9, 78 dpi) ModeLine "1920x1080" 74.25 1920 2448 2492 2640 1080 1084 1094 1125 +hsync +vsync Interlace # Monitor supported CEA modeline (24.0 Hz vsync, 27.0 kHz hsync, ratio 16/9, 78 dpi) ModeLine "1920x1080" 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync # Monitor supported modeline (60.0 Hz vsync, 110.8 kHz hsync, ratio 16/10, 117x134 dpi) (bad ratio) ModeLine "2880x1800" 336.72 2880 2928 2960 3040 1800 1803 1809 1846 -hsync +vsync # Monitor supported modeline (30.0 Hz vsync, 67.5 kHz hsync, ratio 16/9, 157 dpi) ModeLine "3840x2160" 297 3840 3888 3920 4400 2160 2164 2170 2250 -hsync +vsync # Monitor supported modeline (60.0 Hz vsync, 135.0 kHz hsync, ratio 16/9, 157 dpi) ModeLine "3840x2160" 594 3840 4016 4104 4400 2160 2162 2172 2250 +hsync +vsync

Windows 10 Home no driver required plug n play works with ANYDESK remote software just set desktop to MIRRORED mode

What else can I say? Cheap and cheerful is the best :)