for iPad 6 (6th Gen 2018 Released) Screen Replacement Glass Digitizer, Only for 6th Generation A1893 A1954 Touchscreen 9.7 Inch Front Panel, with Home Button +Full Repair Tools Kit

Nice it fix perfectly and was easy to install

The product lives up to expectation; all loss of functionality is my doing. Last week my 2018 iPad did a flat face plant onto a hard floor. 90% of the screen was shattered into little bits. All I wanted was two more years use. Luckily there are plenty of YT videos on how to replace screens of wayward A1893s. There’s also a lot of replacement screens on Amazon. Fakespot gave this one an “A” so I rolled the dice. The glass near and around the home button was badly shattered and in the process of trying to remove it I tore the ribbon. Also I somehow damaged the lcd, maybe via the heat gun, resulting in a half inch of vertical lines up the left edge. I can probably put up with these limitations over the next couple of years. Other: the accompanying tools are almost worthless BUT they did include a small roll of that red double-sided tape and it seems to work fine. No dead spots. In fact I’m tapping out this review on the iPad in question. TL;DR: the product delivered as promised. The only limitations I faced are my own skills (my first attempt) and condition of my iPad.

I am a electronics technician with over 20 years experience. Installation instructions were easy enough to follow and enough videos out there to make this a pretty simple job. The screen I received, I believe is not working correctly. After installation - the very center is not reading any touch. I did remove again and checked all connections - they seem to be clean and well secured. Having dead area's on the screen makes this unusable. I contacted the company via email as they suggested and after 2 days - no reply. I will change this review, once or if I receive notification from seller. I would caution purchasing this product. **Update 5/30/2022- Seller is very quick to respond! Bonus there. They seem to be working with me. I will continue to update as things progress. I did try their suggestion - did not work yet. Last correspondence was: Hello, the problem is caused by the cable of the screen. You need to stick the cable to the screen glass tightly. Otherwise the sharp edge of the ipad will cut the cable. Please try to stick the cable firmly to the glass again,and realign the connector. It can solve this issue,if failed,please tell us,we wont let you waste money,just dont worry. ***Update - Their response through Amazon was amazing. They ended up refunding me - I purchased another screen from them with the refund - installed with no further issues. I have another iPad 6th gen to repair with a damaged screen - I definitely will be purchasing from this vendor again! Quick tips - Make sure you get all of the broken glass. Make sure you remove the adhesive backer on the cables and stick them to the glass as shown in the videos. Wear gloves to prevent finger prints on the LCD. and back of the touch screen LCD is difficult to clean.

The quality of this part and the tools provided are very good. Top notch. The problem is the lack of instructions. One might point out that there are many instructions to be found on YouTube. This is true. However, which is the right video for your iPad? We found three for the proper iPad release, but the specific version number is critical. We damaged the connectors while removing the cracked screen. Basically, the videos we found instructed one to peel the screen edges on the top, bottom and right side so the damaged screen could fold open to the left like a book. Well, my iPad should fold open to the right, so we damaged the screen connectors and, more importantly, the home button connector (the kits with replacement buttons don’t support Touch ID). Why can’t a vendor supply instructions or at least point to a video that is exactly for the kit? Lessons. First, make sure you buy a kit with instructions to avoid the problems I had. The YouTube videos don’t tell you which model number. They will tell iPad 6 2018, but not the model number. To find the iPad model, look on the back in very small print. It is typically Axxxx (four digits). That will help you find the proper kit. If you can find a YouTube instruction video for that model, you will know how to repair your screen properly. I’m not sure I would trust a video unless it is for the exact repair kit I bought. The second lesson is find that video or don’t buy a repair kit without instructions. The third lesson is don’t buy a repair kit without instructions!

My children broke their screens and this replacement was perfect! The screen was perfect thickness and the touch screen works great! The screen fit perfectly on the iPad, and it feel like it’s truly protected. So far it’s been holding up well, and looks super durable! We’ve had no issues with the screen since replacing it and it was worth the money! If I ever have to replace another screen I would purchase this again.

The product fit my iPad 6th gen. Followed directions. Found that and extra adhesive flap was in the left side of the screen that should not have been there and could not be avoided. The OEM screen did not have this added adhesive and this caused the screen to sit too high off the iPad itself. Additionally, it came with a fingerprint reader and home button already preinstalled. Which I thought was convenient until I realized that the home button worked but the fingerprint reader did not. Other than that it’s a great product that has great responsiveness

I've used this product twice. It works as expected and easily installed. Thanks

It worked, but the instruction manual and video didn't help much.

Funktioniert wie original. Kein Verzögerung am Touch. Bin super zufrieden

Screen was relatively easy to replace. Unfortunately, I broke the screen on my first try. One of the small metal bits didn’t align properly. I contacted the company on the guarantee card and they offered a new screen. Due to a mix up, the replacement screen was not delivered and instead, they refunded the money. I purchased another screen. The second install is successful. I am very happy with the new screen and with my experience with the company.

Produit conforme pratique le kit pour le changement d’écran juste sa prend 1h pour changer l’écran sinon tout fonctionne bien

Product works and functions just as original good touch response came with all tools necessary. The 2 way tape was easy to work with and the pre adhesive placed around the inside of glass was nice. Safety glasses/goggles is a must working around glass.

Die Qualität ist wie versprochen, der Einbau einfach und die Teile passgenau. Man bekommt was man erwartet und kann für diesen Preis sehr zufrieden sein.