Vibrelli Bike Wall Mount - Horizontal Storage Rack for Hanging Bicycles in Garage - Adjustable Bike Hanger, Holder - Wall Bike Rack Hooks for Bicycle

This item was easy to install and is very sturdy. I was concerned that I would need to extend it all the way out to allow ample room for my mountain bike’s 23 inch handle bar, but I only needed to extend it minimally. When you turn your handle bar at an angle, you’ll have plenty of room. It’s great to finally get my bike off the garage floor. This item is an excellent space saver.

Easy to install and very sturdy. Quality seems good. Have been using it for a couple months now and haven't had any issues. Looks nice and keeps my bike safely on the wall.

Contemplated a few different types of wall mounts before settling on this one. Very happy with the outcome and impressed with the build quality. We park our cars and motorcycle in the garage so the last thing we want are mounts that could possibly fail and have the bikes come crashing down on them. I don't recommend using the screws provided. They aren't robust or long enough to confidently hold long-term. They may work for some people but I wanted to decrease the possibility of failure as much as possible. Just look at the pics of others mounting into drywall only and not into studs, with the provided screws. They eventually rip themselves out of the wall. It's like seriously, did you not know that was bound to happen? I went to the local large chain hardware store and upgraded to some 1/4" x 3" lag bolts, 1/4" washers, and secured the wall mounts into studs. Mounting only into studs is crucial and shouldn't be any other option. There are 3 screw holes at the top of the mount but securing it using only one at the top and bottom is sufficient, if you're going with something like a couple of 1/4" x 3" lag bolts. If you choose to go this route like we did, use a 7/32" drill bit to drill the holes into the stud prior to mounting the wall mount with the lag bolts and washers. If you've mounted stuff before into studs, this should be very easy. If you haven't, it's also very easy to learn and do. Plenty of YouTube videos out there. One of our walls has several gym equipment, rack, and mounts attached to studs so we have plenty of experience with mounting onto garage walls. We were lucky that the location of the studs were at the right places to allow for adequate spacing between the bikes. If your studs are not in the ideal location for mounting a bike or bikes, you'll just need to get a 2x6 wooden stringer or ledger board from the hardware store, mount the board on both sides into studs, and then secure the bike mount onto the stringer board. Overall, very happy with the way it turned out. We're fortunate to have 11 ft ceilings so we were able to get the bikes up as high as possible and out of the way. The center of our mounts are 85" (~7 ft) from the ground. I'm only 5'8" and with the bikes mounted, I'm still able to reach up to mount and dismount the 2 bikes we have. Both bikes are about 27 lbs each. Highly recommend them and an extra plus for being made in Taiwan!

Looks nice and easy installation. I received the first delivery that didn’t have the hardware. But the return was easy.

I am very pleased with this purchase. I had been contemplating a way to hang my two bikes in my small studio apartment. I even purchased another rack which would have hung the bikes with the tires touching the wall. Then all of a sudden this design came up. I can't believe I didn't see this sooner. The flexible arms make it very easy to hang bikes with different frames. It is also incredibly solid. There is absolutely zero concern that my bikes are going to fall. It comes with four screws which are plenty if you're going straight into the stud. In fact, I actually screwed up one whole on each bracket. So each mount is being held by only three screws. Incredibly strong design. This is a very good product and I highly recommend.

Great fit. Doesn't scratch the bike. Very sturdy.

This is a nice wall mount option but you need to absolutely make sure you install it directly to a wall stud and not just into drywall. If you do that it should not be a problem holding a road or mountain bike. I have mine suspended in my garage so I can park my car close to the side of the garage without the bike being in the way. However, just for peace of mind I did also put a hook above the bike and a safety strap on the bike just in case of failure. I removed one star just because of the concern of failure and I had to make my own backup solution.

It has to be absolutely perfect for me to give any product five stars. This comes pretty darn close. Only a few minor gripes, like the logo being visible, and the nibs that hold the top tube are not adjustable and don't rotate (not absolutely necessary). It comes with very good, long screws, and anchors if you need them. The bracket is solidly built, holds the weight, and provides three angles to raise and lower the bike or accommodate slanting tubes, etc. Although it's probably overkill for a fixie (which is what I am hanging at a little less than 24 lbs), the capacity listed is 55 lbs so it'll still do well with mountain bikes with suspension and disc brakes. I chose vibrelli because I own a vibrelli pump, and am familiar with the brand. Although it appears many of the same type are very similar with locking adjustable arms. Beware though, you absolutely need a stud for this to work (either orientation will work - long or short side). Lath or sheetrock won't hold a bike on it's own. Also, keep in mind that the tube that fits into the welded flange that screws to the stud has about 2 degrees of slop after the set screw is tightened (it will twist to the heavier side), so that if you want the top bar parallel to the floor, take that into consideration as well as natural center of your bike (it will normally lean to the back wheel). Overall, I can recommend with confidence.

An excellent piece of engineering support tool!

Léger idéal pour mettre son vélo à l’abris dans une cave ou un appartement fixation facile

Drilled into a stud this seems very sturdy. My $2000 wallpiece will stay put. I needed somewhere to store the bike over winter out of the way, I would not really want to be putting the bike up and taking it down all the time though. Works as intended. I don't trust the cups to not scuff so I added extra vinyl tape in the contact points. Also removed front tire to avoid bumps from the front.

Excelente calidad y perfecto para sostener la bici, muy simple la instalación con herramientas básicas en casa. Buen material y se ve resistente.

This product displays my bike perfectly. Arrived on time, quality is excellent. Installed easily with hardware provided. I would like to see the rubber that actually comes into contact with my bike be a softer compound, but other than that minor detail I would highly recommend this product.