LG 5220FR2006H Geniune OEM Washer Inlet Valve Assembly for LG Washine Machines

Replaced this hot water inlet valve on my LG washer in August (now 5 months later) and it hasn't failed yet. Fit perfectly and easy to do. Now I'm replacing the cold water side and am looking for the same brand.

My story is the same as that of others that have reviewed here. We saw water on the floor around our LG front-loading washer. We'd just washed a large comforter, and sometimes those things soak up a lot of water and get heavy and throw things off a bit so I figured it was just a temporary thing. But as water continued to leak I figured it was time to take a look inside the machine. Getting into the machine is pretty easy: - use a Phillips head screwdriver to remove the screws from the washer's lid (two screws at the upper back) - slide the washer lid back a bit and then you'll be able to pull it up and off the washer Verify the water leak is coming from the valve. The valve should be wet. You might see water filling up at the hole at the top depending on how the valve broke. That's what was happening in my washer. Did a little searching and found this baby on Amazon for cheap. The repair will take you all of 15 minutes, if that. Here's what I did (apologies for the mansplaining, but maybe it'll help the uninitiated): - unplug the washer from electricity - turn off the water to the machine - unscrew the hot water hose from faulty valve's connector at the back of the washer - use the Phillips screwdriver to unfasten the faulty valve's screws from the rear of the washer - pull the electric connector off the faulty valve - use pliers to open the interior hot water line clamp and slide it down the hose a bit away from the faulty valve - pull the hot water line off the faulty valve - the faulty valve should now be free of any connection to the washer and you can remove and dispose of it - reverse the steps to install the new valve (connect the interior water line and its hose clamp, affix the electric connector on the new valve, screw the new valve onto the back of the washer, put the washer lid back on, reconnect the exterior hot water hose, turn the water back on, plug the washer back in) You can also probably find videos on valve replacement that will help. I have no idea what a plumber or appliance repair person would charge for this but if you can do it yourself it's a cheap and easy fix. I wish they were all this way! Thanks to LG and Amazon.

The old original part is on the left, the new one is on the right. Light plastic is original, dark plastic is new. My washer had started leaking and we couldn't figure out from where. After taking off the top and running a cycle, I was able to see soon as the hot water started, this valve would leak right at the base of the white cylinder thing. Even after taking it apart and attempting to clean all the seals and whatnot, it still would leak, so luckily Amazon had an official LG replacement part! This is super easy to swap out. Just two screws, an electrical connector, and a rubber hose, and it's out. Swapped everything to the new one and ran a cycle before putting the top back on to make sure it didn't leak. Sure enough, everything worked great! No more leaks! The only difference I could see if the bracket you screw onto the washing machine was a slight different size, but the screw holes still lined up so no worries there. The little built in filter thing looked slightly different too, but again it seemed fine and it works great. Hard to beat for the price. So glad this was able to be swapped easily!

Easy to install, works just fine!

Arrived on time. Part replaces broken/leaking part. Easy to install. Great price. My LG washer is fixed & ready to go.

Operated without any issues when initially install. Note some noise when valve opens likely coming from a combination of water, pressure and screen position easy fix so far today to date the valve has worked and installed easily.

Great delivery, fast and on time. Part fit perfect works great. Very happy! Washer fixed.

Perfect replacement. Solved the no water entering machine error code. I had cleaned the plastic removable filter in the past; however, the internal fine mesh filter was clogged.

After 21 years!!! of using the washer - without any other issue - the hot water valve started to leak. The replacement was super easy and it solved the issue. Hoping to last as long as the original one.

Esta válvula la compré solo para usar el diafragma interior ya que mi lavadora es de la misma marca. Y no he conseguido la válvula para el modelo de mi lavadora Si me funcionó

Its good..we did not have problem with this product..

It fit like the original part. It doesn't leak water everywhere. 10/10. It took minutes to install.

OEM part, works great