BRIDGEMOUNTLion Gears Tactical Picatinny 90 Degree Angle Mount, 1.37" Long with 3 Slots

I bough this to mount on the top rail of my Kel-Tec KSG so I would have a side rail to mount my tactical light on. It's a perfect size if you plan to mount a tac light or most lasers. This allowed me to mount the light without interfering with or having to raise up my reflex sight. Installation was super fast and easy and the rail is very high quality. I have absolutely no complaints as this is an excellent value for $9.99! Item arrived on time via Prime and was packaged very well. I bought a second one and will likely end up buying more later down the road.

Excellent product. I bought this to go on my Mossberg 695 bolt action 12ga to use my ATN HD camera. When I originally mounted my camera on the shotgun (see picture), I failed to realize that the mounting orientation for the camera required that I turn the camera 90 degrees, so my videos I shot that day came out sideways when I played them back on my laptop. I turned the camera to the proper orientation and mounted it on this rail and then mounted the rail to shotgun below the scope on the main rail. The mount and camera do stick out on the left side of the shotgun a couple inches, but no worries. When it's time to case my shotgun, I just loosen the allen set screw and remove it from the main rail and leave the camera hooked to the 90 degree rail. Works fantastic and stands up to the recoil of a 12ga shooting 3" slugs. I'm looking forward to mounting it on my crossbow scope rail this weekend to see if I can video a crossbow kill. Should be excellent. I will try to get a picture of this mount as I have it now with the 90 degree rail mounted on the side of the shotgun, not on top, as in this picture.

I'll give this adapter a five star rating. It seems to be of good quality and did what its supposed to do. However, for you AR platform people, let me give you a little heads up on configuration. I have a Ruger 556 which has got to be the most uncompatible rifle for add on's. I mounted this adapter on my main rail that already supports a Bushnell scope. I wanted to add a Streamlight 2, to it as well. The light threw so much light on the front sight that it was a bright wash out inside the scope.. Another words you may want to remove your front sight. I did not want to do that, so, I reconfigured, starting with a 45 degree adapter then adding the 90 degree then adding the Streamlight, presto, no reflection on the front sight, it works fine. Sequence, mount the Streamlight to the 90 degree, tighten, mount the 90 degree to the 45 degree, tighten, mount the 45 to the main rail under your scope tighten.

Good hardware for mounting attachements off the main rail. It consumes just a couple of slots on the rail, fits almost anywhere and gives a surprisingly firm grip to a light, laser, or even larger attachment. I use it with Windham AR-15 to situate light on the railed gas block, it leaves enough space to secure Troy front folding sight behind it -- I was able to revert to original front grip set and save quite a bit of weight comparing to the extended rail kit (I still like that kit though). The only reason I did not give it five stars -- the tightening screw is not flush with the surface, otherwise the item is perfect.

Works great for my HHV helmet

Is it worth the money .. yeah compared to like GGG mounts that want like 45$ ... It seem to be a little tight on accepting the slid on FAB Defense light mount ... BUT it does go on ... NOW the downer ... when I got it could not get it to tighen up right on the 1913 Picitinnay Rail ... DEFECTIVE .. there was a tit of the aluminum right at the top of the drilled hole for the tightening bold . In less than 2 min with a file I had it fixes .... was it worth the price of what 8$ yeah it works and seem solid .... Not as slick and neat as some other off set rails ... BUT it's cheap and you locktight them all SO ??/ It should work . 3 star for milling defect ....

this mount looks good and the fit is good. I put a laser on it so that I can cut it on and off with my thumb.

This satisfies my needs completely. Easy to install on my top rail so I have a side mounting location for a compact chronograph (FX Pocket Radar v2). Used on FX Wildcat MK3 BT compact and allows for the chronograph to be far enough away from the muzzle to accurately measure the speed of pellets/slugs.

Absolutely amazing! This is exactly what I was looking for and a low cost option to mount a light on the 12 gauge! Zero obstruction of the iron sights. I’m super delighted I found this !

Excellent quality

Great piece of kit not easily obtainable here. Easy order and just want I wanted!

Worked great to install a flashlight on the side of my Riffle.

Didn’t end up using it as I intended, but will keep in case I can use it later