Amazon Basics 1/2 Inch Drive Click Heavy-Duty Torque Wrench, 25-250 ft.-lb, 33.9-338.9 Nm

Good quality, great price and worked at treat when replacing two wheel hubs on my car where greater force was required

I though that it is great value for the price. Arrived in a presentation type plastic storage box and was well wrapped and protected inside. It feels quite heavy and of good quality/solid build. Other users said that it is difficult to set the correct torque settings, but it comes with some pretty idiot proof instructions and being an idiot myself, I found it realy simple to use. Others also said that the 'click' when you reach the desired setting was quiet/got harder to hear the more you used it. Mine, so far, has stayed at the same sound level. Its not the noisiest 'click' but its still audiable. Unlike other reviews, I also found that the torque wrench I ordered does ratchet in both directions. Maybe its due to it being a newer/updated version. Highly reccomended for the home mechanic/DIY'er/ tinkerer at the weekends.

I bought this tool because i have started working on my new and old motorbikes. Initially i bought it only for taking out the wheel nuts so i can change the tyres. It does the job! Also, without this tool i wouldn't be able to take off the front sprocket of older motorbikes, which was factory sealed and not changed in 20 years! Set the maximum torque on this wrench, and pushed it with the full force and took the sprocket out! Pros: Easy to set the torque with the included lock/unclock pin at the bottom, very heavy and very sturdy, has a nice case to store it while not using it. Also, has ft-lb on the other side, so you can set NM and FT. Cons: The tips is not locking (no lock), but it can be good if you want to tap with the hammer. If you setting NM it can be sometimes tricky to see the exact number, so you endup by roughly setting the torque. For the price this is a very good purchase!

At first I thought this looked a well made torque wrench but after about a dozen uses it no longer clicks. Initially it produced a very audible click when it reached its setting. I was using it to tighten two wheel bearing nuts up to 190 ftlb. It seemed to work fine. After using it I wound the setting down to its minimum setting as stated should be done to store. After a few weeks I needed to tighten some nuts to 40 ftlb. I set it up to this setting and the click was very weak. Not sure if it was at the correct setting either. Further attempts to use it more recently and it no longer clicks at all at any setting. The return window has passed so I'm not sure how to send it back now.

Seems great for the price, bigger than I was expecting. Couple of downsides I've found, firstly it has torque values for lb/ft and N/m, with the rotations adding 1 - 25, but obviously, a 25 point change in one of these is not the same as a 25 point change in the other, as such the N/m side is just seemingly arbitrary markers that corespond to the imperial units on the other side, making setting to in-between values a guessing game. Not ideal if working on something built in Europe using metric values. The other issue I found is the box, I was always told to reset a torque wrench to 0 when finished to stop it adding unnecessary wear to the inside and offsetting the calibration. You can do that with this tool, but when you do, it's extended too far to fit in the case it comes with. As such it always needs to have some force on it when in the box. I don't know how much, if any impact that will have on the tool over time, just seems like an oversight to me. All in all, seems good value for money, but not a perfect tool, hence the 4 stars.

Got this for my car and needed it to check and do up wheel nuts (and other things). Very good range going from 25 ftlb to 250 ftlb. Came in a nice plastic box with a reasonable set of instructions. This tool is fine for the amature mechanic and is well priced. The selection of the desired torque setting is done by twisting the end untill the twisting handle lines up with the appropriate mark. When storing it shouuld be returned to the lowest setting so as not to strain the spring. Good piece of kit that I hope to use soon. Note: it doesn't come with any sockets, you will need to supply these separately.

Good quality .strong and heavy for regular use .

Its "Basic" but performs like the big boys, well impressed.

This is a solid, well-built tool for numerous tasks, especially if you do your own tire changes. I compared torque against a friend's much more expensive tool, and this one came out extremely close but for a fraction of the price. What surprised me is that I expected this to result in tire lug nuts being made much tighter than I would otherwise have done by hand, but just the opposite was true in my case - all to say that it's good to have a tool that actually allows you to know what you're doing according to the proper specs. Note the 1/2 inch size, which for most of us means buying a proper size socket because the 1/4 inch stuff we likely already have on hand won't fit! A good unit and would buy again.

値段なり。でも、買って後悔はしてる。作業スピードをあげないどガチッていわない。じっくりやると、どこまでも閉まっていく。ヤバい

I got this tool to do a wheel bearing job and wanted to make sure I torqued the axle nut according to spec. This is a really nice piece of equipment as I set the torque and with ease reached 129 ft lbs with very little effort. The length and density of this tool makes torquing hi torque bolts a breeze. I really had to double click because I couldn't believe how easy it torqued 129 ft lbs. Higher quality than I expected. This blows my old 1/2 inch torque wrench away which was purchased from a popular discount hardware store. I got this on sale and whoa what a bargain. Similar torque wrenches are around the hundred dollar price range. This is a nice tool to have in your garage or if your the kind of person who works on vehicles frequently. I am really glad I bought this when I did because the sale price was unbeatable.

Cheapest torque wrench in 30 to 330 Nm range I could find. Using it for private/hobby car repairs and tire changes. For tightening wheel axis nuts to specs I needed something beond the regular 220 Nm range torque wrenches often used for tires (lug nuts). Quality looks OK for the price and my (infrequent) use. Pros: - Price. - Does the job. Cons: - Has both foot-pound and newton-meter scales but is heavily foot-pound oriented. Foot-pounds are listed in whole units in clear ranges of 25 and are easy to read. The values on the new-meter scale are 1 on 1 derived from the foot-pound scale. The numbers contain fractions and the ranges are not in logical easy to read amounts. The fine scale on the handle is in foot-pounds only. One stripe on the scale is one fout-pound (not one newton-meter) so one always needs to do manual conversion of the reading. Therefore the newton-meter scale is awkward and impractical to use in practice. - The anti-slip pattern that is pressed into the handle is shallow and uneven and could be much better (looks like a poor quality job). The rest of the wrench looks better but the handle makes one wonder about the overall quality and accuracy of the wrench. - Operation of the locking knob on the bottom is not exactly fluid and difficult to operate by hand. Difficult to lock the handle by hand, unlocking by hand is easier. - There is no calibration report included so not sure about the accuracy other than the mentioned general +/- 4% accuracy that one has to rely upon.

Usado a 280 , 125 y 175 Nm y sin problemas, el clic se aprecia perfectamente muy buena compra