Wonderlokking Tite Chairs, Adhesive for Chair Joint and Furniture Repair by PC-Products, 20 gram 208113

Wonderokking #w2081 Tite Chair Glue works. The state of my chairs was as such: very old oak kitchen chairs,some have been repaired, replacing some spokes and dowel rod connections, they have some repaired broken spokes and all wiggled from loose joints. I first examined each chair and placed a piece of tape in the area of a loose joint to mark where they needed repair. Then I followed the directions and applied the glue around each spoke or wood connection. I placed the chair so that the glue would run into the area where the dowel rods connect the two parts of the wood. The glue ran into these areas quickly. After a short time I turned the chairs and applied the glue to other areas of the chairs by turning them over so the glue would flow into joints facing the other direction. Some of the joints required that I repeat the process up to three times. The joints in some cases were in very bad shape. I fixed the connections on 6 chairs, each having about half of the joints loose. The average chair had about 6 places to fix. I used almost the entire bottle of the glue and it took a few minutes on each chair with each application. It was well worth the effort. All of the chairs are now solid. I don't know how long they will stay that way, but for the price of the product, I would re-apply the glue again if needed and not have a problem.There is a similar product on the market which is much more expensive. I feel that they are likely the same glue. It really is a type of super glue, but the applicator is the thing one needs to do the job. It applies a very small amount of glue to a tight space. It works great. I highly recommend Wonderlokking glue.

Just wanted to add my voice to the throngs of reviewers singing the praises of this fine product. It does exactly what it claims to do, and I would buy it again in a heartbeat. I recommend reading and following the brief instructions included with the product. Sounds obvious, but they will help ensure your success, especially the parts about using it sparingly and positioning the joint so that you are applying it downward, so that gravity will help it get down into the joint. Everything about this product seems to be very well thought out. The product includes two small-diameter flexible hoses/tips for dispensing the liquid, and I found the them to be an excellent design that work very well for the intended purpose. If you have a steady hand and good eyesight at close distances, you will be able to apply the product properly. To help preserve the product between uses, there is a cap that fits over the nozzle, a larger cap that fits over that, and a resealable zip-lock package to enclose the whole thing. I purchased the product to repair three bar stool chairs. Encouraged by success with those, I went looking for other chairs that needed help and repaired a total of six chairs so far, that had varying degrees of looseness, and still have some product left in the bottle. One of the chairs was extremely wobbly, and had been since we got it. That one took a few separate applications of the product, but it is now rock solid for the fist time in its life. Be careful as to how much product you apply to the joint. If you squeeze the bottle too hard, you will have a mess. If you squeeze gently and allow the product to penetrate into the seam as you go, you will find that it gets sucked into the joint and leaves very little, if any, visible trace behind on the outer surface of the spindle (or whatever you are gluing).

This adhesive is works ok for tightening loose chair joint, but a few cautions should be noted: 1. Definitely wear gloves! The cap is difficult to remove, and in taking it off I got glue on the fingers of my gloves. It is like super glue and dries very quickly, and can bond to your skin! 2. The thin spout was a bit difficult to attach. May require enlarging the hole on the bottle a bit with a small nail. 3. Avoid turning the container upside down directly over the piece of furniture, as it may drip where you don’t want it.

This works great if u have loose chair backs or legs. The glue holds them tight when u use it.

This works!

We bought an old rocking chair from an antique shop so it would be easier to put my 40 pound 13 month old to sleep (We were previously using a second hand glider which after repeated use, just started snapping like match sticks). The rocking chair is great, but there was a horizontal bar at the front that kept popping out, and I didn't want parts of my chair to be popping out; so every day I would smash the chair together before I went to work, and again after I came home from work, after my fiancée used the chair to put our son down during the day, I would smash the chair together again before I put him down for the night. This was a daily routine that I didn't want to have to continue. I read the product instructions on Amazon, read some nightmare reviews, and decided to re-read the product instructions. When the product arrived, re-read the instructions, I prepared the work area as instructed and followed the instructions. The product performed exactly as described, one application and I have not had to smash my rocking chair since. 5 stars. Read and follow the instructions.

This worked great to fix the loose joints on our dining room chairs. We thought we would have to take the chairs apart and re glue them which was a big job but this product went right into the joints and the chairs are now very solid. Great product.

Wow, this really works well. I have a chair with wobbly joints which I’m reupholstering. During the process of removing a million staples from the frame, the chair joints began to loosen until the whole thing was quite rocky. I applied this amazing glue, using the very fine applicator nozzle, and it now feels solid again. I can’t understand how it works so well? What magic is this?? Well worth the cost. I hope it will be useable the next time I need it unlike most other superglues.

Gap where chair back meets the seat. No means of tightening it. Glued and so far stayed tight. Glued very runny so flows into the gap.