Replacement for New Uncut Transponder Ignition 4C Chip Car Key TOY43

Worked perfectly for for my 2004 Toyota Avalon perfect! Five stars!

Good quality. Although I needed to read them over a couple of times, programing instructions online were detailed and I was able to pair the key with my car. The name of a nearby locksmith was available who would then cut the key, and it continues to work as advertised.

Got it cut by a Master Key maker who pulled the lock to make a good key my old key the original for the O2 Toyota Camry had worn off so much. It would fall out of the ignition and wouldn’t even unlock the door manually. Highly recommended.!!!

The key snapped while unlocking the door, had to have a lock smith fix it.$80 down the drain

Work's very well in my 99 Toyota Sienna. Had it cut in an ACE Hardware store ($1.00) and then let the car program itself, following instructions posted by one of the reviewers of this product. Done in less than a minute.

Overpriced but ok

So I got this for my sons 2002 Camry after dealership told me $290.00 for a new key plus taxes. Local locksmiths in our area couldn’t do it either. I took it to TrueValue and they cut the key for $2. I tried the instructions from the site they provide with the key they did not work it was only for the key fob not the key. I searched online couldn’t find anything. Finally I had an idea. Lexus and Toyota are basically the same. So I looked at how to program a Lexus after market key. Bingo! First you put your original master key in the ignition. Keep the car off. Press the gas 5 times. Then press the brakes 6 times. Take the key out of ignition and put the new key in then press the gas once. When the security light stops blinking the key is programmed. That’s all! Good luck. $12 vs $280 was worth some research.

How to Program a 2000 Toyota Sienna Ignition Transponder Chip Key Step by Step How to Programming Instructions: Use this procedure to add a key to the system Must have your master Toyota key ready (black key) 1. Insert black programmed key into ignition. 2. Press and release accelerator pedal 5 times within 15 seconds of inserting key into ignition. 3. Press and release brake pedal 6 times within 20 seconds of step 2. 4. Remove black key from ignition switch. 5. Insert new unprogrammed key into ignition within 10 seconds of step 4. 6. Press and release accelerator pedal once within 10 seconds of step 5. 7. Once these steps are performed properly you will see the immobilizer warning lamp begin to flash and after one minute the lamp will stop flashing. Once the immobilizer warning lamp stops flashing you will have 10 seconds to insert an additional key to be programmed. 8. Within 10 seconds of inserting key into ignition press and release accelerator pedal once. 9. Immobilizer warning lamp will flash and after one minute the lamp will shut off. Go to ProgramYourRemote.com for key fob programming instructions.

Bought a 4Runner that came with one key. Ordered this one, programmed at dealership, cut at local locksmith shop and now enjoying the confidence of having two keys. Great product so far!

I cut key locally and programmed it myself with a video from YouTube.

not work, only can open the door, can not start the car!

Great product

Toyota dealer wanted $3 million dollars to cut me a spare key for my 2002 Solara. Got this paid a locksmith $4 to cut it for me. Programmed it myself. Toyota can go screw.