6 inch 3000K/ 4000K/ 5000K Selectable,Dimmable Recessed Lighting 15W CRI90+,Ultra Thin LED Recessed Light with Junction Box,IC Rated, Canless Wafer Downlight, Damp Location, White, 6 Pack

I've had 3 of these in my 6 year old daughter's bedroom and they work great! I have them setup with Alexa to bright and dim as needed, and on occasion I'll set them up in what I call party mode where they go through the color spectrum. It is fun for her! They get plenty bright, easy to install, and they don't look cheap. Also paying less than HD prices by a lot, which is a bonus.

These are the perfect lights. After 3 different purchases of lights these provided the best lighting. The others would only light up bright in the middle and fade out towards the edges. Also these do not require a hub which the previous light company didn't care to mention on the sponsored website. Also another company had you use their app only which i could not get to work. The best part.. I have other lights and I run them all off of one app, Geena, which works great, Cloudy Bay offers an app to use but the lifts are definitely not required to be on that one specific app. They work great! They do cost a little bit more than others but you get what you pay for in this case

I studied carefully at all the options before pulling the trigger on these lights. My big questions when buying LED is are they bright enough and is the white option correct. These lights are perfect in both areas. Very bright and multiple Kelvin options for white, plus nearly infinite options for other colors. The installation instructions are somewhat limited, but they a breeze to put in. They connect directly to your 120v a/c circuit and can be wired in series. You will need a dedicated switch to be in the on position (you have to switch them on and off to put in program mode to activate.). If you don't have an available switch, you can always put a remote switch in the circuit for less than $20. I was so impressed, I bought another set. There is nothing special about buying different quantities, so if you anticipate the need, go for the quantity discount. Very user friendly app and easy interface with Alexa. Very nice product.

Worst lights I’ve ever owned. The lights are always blinking like they lost internet connection. I have a stable internet connection 2.4 with Starlink. WHY IS THERE NOT A SETTING TO TURN OFF INTERNET CONNECTIVITY SO THEY DONT BLINK ANYMORE!!!! As I’m typing this all the lights are blinking. These are unusable. I can build a house from scratch and I’m also good with technology. To have to reconnect these lights to the router every couple days is ridiculous. Steer clear of these. I’ve wasted $200 as I can’t return them now since it’s been too long. I figured I would figure it out eventually. If there was just a setting to turn off internet connectivity and just have them be used like a regular can light I’d be ok with it. But there is no button I can find for that. Worst purchase ever.

I do love these lights, I am remodeling my house and the just white ones are half the cost so I use those where It makes sense but they also don't have wifi capabilities. These are just as bright when white and can be controlled to do what ever you'd like. Install is pretty easy with the push lock style connectors in the junction box. If you need to remove any wires from the push lock, hold the wire steady and twist the connector clockwise and counterclockwise and it'll come out easily. App works well most of the time, sometimes a light will take a second to change colors or turn on via wifi control, likely an issue with slow internet. I've emailed the company about the failed light without any response yet(4weeks waiting now). Contrary to my thoughts when it stopped reacting to app commands, it's not the junction box but the light itself. Side effect was it just reacted to the light switch like a normal light, no app control at all. Would buy again. Also, great for only fan nudes and foot pics, really sets the mood!

We have just moved into the house, and wanted to update the lights in the kitchen and family room. We ordered 18 lights, to put in our family room and kitchen. Since we move furniture around and the lights cannot be aimed, we decided to put 12 in the family room, and 4 in the kitchen (in addition to the two drop down lights over the island), and one in the garage (really done, because we had two additional lights, and a wall switch to the garage that was not being used. And the lights are working great. We have not used all of the functions (played with them a little, but they are being used as basicaly lights). We have the 12 lights connected to one wall switch, the four kitchen lights connected to another wall switch, and the garage on its own wall switch. When we turn on all of the lights, it is BRIGHT. For the majority of the time, we have very few lights turned on in the family room, and we do use the light switch to turn them on and off. What is nice is that you can set each individual light for its "Power-on Behavior", which allows you to have the light come on to a default setting, the last setting, or a custom setting. We opted for the custom setting, in the kitchen we have two lights come on 50% and two remain off. For the family room, we have four come on at 25% and the remainder remain off (the remainder we use for reading, or something that requires additional light). We did play around a little with the colors, which are vibrant and clear and there is an option to sync them to music that we played a little with as well, and seems to work pretty smoothly. The app is easy to use, the devices easily connected to the network, and have yet to lose connectivity, even with the actual removing of all power each day, it also controls our electric fireplace, which was nice added touch. When I dig my Alexa out, I will get that configured and Home System configured, and will update the review. One thing to add - I did have to turn off my 5GHz temporarily to get the devices to connect, but that may be more of an issue since I was configuring 12 at the same time, but I have not had an issue with connectivity after the intial connection.