LP103454

Works perfectly! The battery holds a great charge and performs exactly as described. It was easy to install and revived my device instantly. Great quality and fast shipping — very satisfied

We love a sound machine we bought from Brookstone several years ago. As life has it, technology turns over at an alarming rate these days and replacement parts - even something as common as batteries - become unavailable. Our sound machine used a slightly smaller battery with a slightly different plug. But with a little soldering and heat shrink tubing [two wires; one red and one black], this new battery fit perfectly into its designated space. It's a perfect repair for our beloved machine. It's quality of sound for its size plus the types of sounds it creates is our favorite features and we are thrilled to have it working once again [the old battery swelled warping the internal mechanisms]. Sleep is important and with our sound machine we get really high quality sleep. Repairing is always preferable for us over replacing and with this solution we are quite happy. Now, I've got to turn on our machine and go take a nap [yawn]. Don't let the difference in connectors shy you away. With a little ingenuity, you too can repair something. Plus you probably have a friend who could help you out if you cannot do this yourself anyway. Give this a shot. We did and we're glad we did.

For my application I have to replace the plug but the battery is excellent

Works well. I have a potensic P5 drone. It's an older model. So the batterys are extremely hard to find. But with this purchase, I was able to open the old battery and desolder. The old swollen batterys and replaced them with these. Not it works perfectly and lasts longer. If you don't have experience with soldering ask someone who does. But even with basic knowledge I was able to do it. These batteries are good for lots of other projects too. They are a good value. Just check all the requirements for the product you are working with. And don't just throw a battery on it.

Ordered for use with some RAK WisBlock Base Boards. After reversing the plug polarity so it matches the board, the batteries do work to power the board, and charge when the board is connected via USB. Unfortunately in spite of them having a BMS, three of the four batteries have swelled dramatically during the first three or four charging cycles. Straight from the box, they measure 9.37mm thick. The first battery is noticeably bulging and measures 10.85mm after being put through a few charge/discharge cycles over the course of a few days. The second one I tried, in the hopes that the first one was just defective, swelled to 9.8mm after just a single day, being charged by the RAK. The third one I've placed on my bench power supply with the CV/CC settings on 4.2v @ 1.0A (0.5C -- half what the Amazon product page says the battery is rated for; the battery itself is not marked with charge capacity information, nor is it printed on the including documentation. After charging this way for only 45 minutes, while still drawing ~500mA @ 4.2v, it has already swelled by 0.1mm. Will not be buying this brand of battery again, and all of these are getting recycled.

Double check polarity otherwise seem solid and so far up to spec. Worst case scenario de-pin and rearrange to match polarity.

Included in the package was a "Buy this at our website and its 20% cheaper!". It wasn't. It was $3.99 more expensive.

Worked great as a replacement in my video monitor

Los cables estaban mal soldados, causó un corto en mi controlador. No lo recomiendo.

Decent battery for the price, runtime has so far been good in use, lasting around about a day depending on if the LoRa device I'm using it with has the GPS module active or not, polarity wasn't an issue in my case because I was changing the connector anyway but it is always a good idea to check, as I had to discharge it using something else before changing the connector to fit my project I did have to swap the polarity, this is easy to do if you are careful and don't allow the two contacts to short out. For my project the size of the battery was not an issue as I had purchased it prior to 3D printing a case so I could use the sizing as a guide, however again something to check if you're replacing a battery in an existing product. The battery does have an onboard cell protection board under the orange tape where the wires go in, for these types of battery it is important that there is some kind of over discharge protection and this does work as it should, after I did the initial discharge to make it safe to work on to integrate into my project I checked this out with a multimeter. All in all, it's a good value battery and because I have a similar project lined up I'm more than likely going to buy another one

Ha soddisfatto perfettamente la necessità.

LP103454 Ware wie versprochen, alle funktionieren, keine Verpolung und EU Konformitätserklärung vorhanden. Was will man mehr?

Prodotto di buona qualità ad un prezzo molto competitivo rispetto ai competitors cinesi. Per mia esigenza ho tagliato il connettore in plastica per saldare i fili direttamente al circuito Stra consigliato