Frizzlife Reverse Osmosis Water Filter - Alkaline Mineral pH+, NSF/ASNI 58&53&42&372 Standard, 600GPD Tankless RO Reverse Osmosis System, Under Sink, 2:1 Pure to Drain, Reduce FPAS/PFOA, PD600-TAM3

I’ve been using the Frizzlife Reverse Osmosis Water Filter for a bit now and I’m honestly very impressed. The installation was much easier than I expected, and the tankless design saves a lot of space under the sink. The water flow is fast, and the taste difference is noticeable right away — clean, fresh, and no weird aftertaste. I really like the built-in display that shows TDS levels and filter life. It’s convenient not having to guess when filters need replacing. The alkaline remineralization is a nice bonus, and the water tastes great for drinking and cooking. Overall, the system feels well-built and high quality. It does exactly what it promises, and I feel confident about the water my family is drinking. I’d definitely recommend this system to anyone looking for a reliable under-sink RO filter.

I have a whole house iron filter and water softner to correct high iron from my well. My TDS from water test was at 265ppm. From my understanding, a water softner adds some sodium to the water. I bought this item to reduce my TDS in my drinking water, while adding benificial minerals at the same time. After installation, my TDS were reduced to 12ppm. Installation was pretty easy for me. I had a faucet from years past, and had drilled the hole thru the stainless sink with a special bit. The instructions are easy to follow and straight forward. My only issue was getting power to the sink area. Tapped into my dishwasher power line to provide power to fizzlife unit. Total installation time was about 2 hrs. There is a slight hum when using this unit, but barely heard from under the sink cabinet area. The water has a fantastic taste after running thru the Tam 3 ph mineralizer filter! Its a pleasure to drink slightly alkaline water, and much healthier with added minerals. Water output from the faucet is decent, not slow and not really fast but somewhere in the middle range. Its a good looking faucet and well made, not cheap. Overall I am completely satisfied that I purchased this unit and Highly recommend it to anyone looking for great tasting water. You wont be disappointed! Lastly, customer service is outstanding!!!! Had a small issue resolved in a matter of a day on a Sunday to boot. They really back their product and support the customer 100%

Very easy DIY install with instructional video. Product appears to be of good quality and a reasonable price. Municipal water in our area of Florida is horrible, so we are looking forward to safer drinking water from our new Frizzlife system.

I installed this system about a week and it's working fairly well. I have purchased and used about 10 different ROs tank systems over the last 10 years. I have installed the iSpring and Apec systems. I bought this unit to replace my Apec 5-stage system. Nothing was wrong with the Apec. However, I wanted to save space with tankless and try out the remineralization filter this comes with as well. installation: The unit was easy to install. But, keep in mind that i have installed RO systems a few times. And, in mine case, I was replacing a system. So, some of the work like the waste pipe hole was already done. And, I knew how to deal with all the fittings and such. Most every thing is easy if you have standard water lines under your sink. The kit comes most everything you need. You will need a drill a hole to install the saddle for the waste line. But, it's just one hole and easy if you are drilling into plastic waste pipe. Also, I already had a faucet installed from my previous RO system. However, if this a new install, you'll need to use an existing hole or make hole a new one in your sink or countertop. That could be the most difficult part if you are not handy. They have a video for the installing as well. Pretty good. I liked it. The quick install paper guide can also be used. But, if this your fist one, watch the video as well. Lastly, I thought the kit game with good parts compare to other systems. They were generous with kit and extra pieces. They even included a razor to cut the included piping down if needed. Filtering: I have not sent my water out to a lab for testing. Will do that if i keep this unit. However, my input in TDS is about 400-ish here. The unit's display claims 05-06 TDS output. And, at the faucet after the TAM3 remineralization filter, it readys 40 -100 (yes, weird that readings would vary that much). Keep in mind, TDS does not dictate water quality. That is just telling you the count of Total Dissolved Solids. So, those could be good or bad of is in the water. But, at least you know it's filtering something. Going from 400 to 6 is stellar. My previous RO went from 400 to 22. Water Flow: The unit claims about 600GPD. I measured about .40-45 gallon per minute at the faucet and half that at my refrigerator faucet (see section on refrigerator below). This water flow is a bit slow for sure. But, for glass of water, you are fine. If you need to fill a pot, you need turn it on and walk away for a bit for it to finish. The 600 GPD rating is reallygood and means that the amount in day that this unit can filter is substantial. My last unit was 90GPD. However, since it had a tank, the water dispensed faster than this unit. Of course, if you sit there and deplete the tank, you have to wait for more water to be generated. With this unit, even though the flow is slow, it's keep going and you won't run out unless you let it run for more than 30 minutes continuously at one time. After 30 minutes, the unit go into protection mode. Which is a good thing if you accidentally left the water running. Also, saves your filters too. Taste: This subjective, of course. I felt the taste was okay. Not sure if it will change over time. My previous RO system tasted better in my opinion. But, it might be because this one adds back the minerals. So, maybe I'm simply not used to it. Don't get me wrong. it's better the regular tap water. Just was exacting more of SmartWater taste. Again, I think it's a matter of opinion. Nice Features: 1. TDS Display - this unit has a big digital TDS output display on the front. You can see it pretty clearly. This reading tells you what the unit outputs. I wish they showed you the input TDS value to the unit. That would be really nice. 2. Filter Life Indicator - The unit has these bars in the display that show you when the filter life is up. I have not had the unit long enough to see if this works well. But, I like this too. Before on my other systems, I have to measure water TDS or mark on my calendar if they have just been there too long. 3. TAM3 Filter bypass and maintenance - So, the external remineralization filter allows you to remove it without turning water off or unplugging the main unit. Also, if you want to bypass it, you can by removing it. I wish the main until allow this as well. The main unit requires you to turn off water and power to replace cartridges. Noise: I don't have pro db meter handy or a controlled sound room. But, using my phone DB meter, I saw about 40-50 at 2 feet away with cabinet door open. it's hard to really measure this as there are a ton of factors involved. Like your cabinets. Surface of the cabinet, how much stuff you have in your cabinet and such. Simply, I didn't think it was that loud for me. With cabinet door closed, it's really not that load. If you get this unit and want to reduce noise and vibrations, you can put a rubber mat or pad under it. I have water proof mat under my mine. Refrigerator Integration: I have Whirpool French Door unit and it states in the manual that it needs 40-60psi water pressure. I contacted Frizzlife support and they claimed their unit delivers about 14.5~29psi of water pressure. So, below what my fridge wants. Does it work? Well, kind of. I mean, my fridge makes ice. I have to empty the bin completely and see if this unit can refill completely in one shoot and how long it takes. But, I do know the ice is smaller and production seems slower. Where I'm really disappointed is the fridge faucet. This has dropped to half the water flow speed. From 6-8 seconds to fill 1 cup to 16 seconds. You have to really want water from there to wait there that long. The regular faucet is slow. But, this takes it do another level. Also, my distance from under the sink to fridge is about 18 feet. So, that probably reduce the pressure a bit. Unfortunately their support says there is no way to increase the pressure. This is something the tank systems can over come. Some tank systems by default have better pressure. But, you can alway add booster or pump to tank RO systems. If you need to connect to fridge, you might want to consider a different system. Customer Support: For most products, i don't usually contact their support. But, in this case, i sent an email in to see if anything can be done with the water pressure and speed of flow. The support responded very quickly and was very nice. They were very honest about their system and tried to help out. Unfortunately, they were not able to solve this issue. But, they were very responsive and tried to explain things to me. Most purchases on Amazon have terrible sellers with limited support. At this time, I thought Frizzlife was good and friendly. Overall Impression: I really really wanted to like this unit. Small, compact and good industrial design. I like the quick inserts filters and no tank. It saves a ton of space under the sink. And, you don't run out of water as easily as the tank system. Water tastes okay and you the minerals back your water. However, the water flow is really disappointing. If I can figure out how to increase pressure, I will return it and go with a tank system that does remineralization. This unit cost almost double that of other tank systems. So, I'm being picky for a reason. And, yes, there are tank systems with remineralization. If you are not going to use with a fridge, I think this is a fine system. But, right now my family won't use the water from fridge because of the slow flow. Anyway, hope my review helped. If someone figure out how to increase water pressure on this system, please comment. If that issue was resolved, I would give this unit a 5 star. But, it's losing 1 star right now for me due to water pressure.

Perfekt vatten. Vatten för dryck och matlagning till 2 personer. Gått i 2 år nu och fortfarande inga indikationer på att filter behöver bytas.

Great filter easy install

Scrivo questa recensione dopo un anno di utilizzo allegando immagini della mia installazione e delle analisi dell'acqua che ho volutamente fatto fare dopo un anno proprio per verificare la validità del prodotto. Innanzi tutto sono stato favorevolmente colpito dalla macchina che ha un discreto peso ed e' fatta con plastiche solide e una qualita' generale abbastanza alta per un oggetto preso in sconto a 360€ per il black friday. Piccola premessa.Nel mio impianto e' gia' presente un addolcitore con a monte un filtro a cotone 10micron ,questo va considerato quando parlero' delle analisi chimiche / biologiche dell' acqua. Ho scelto il Frizzlife PD600 dopo attenta valutazioni di caratteristiche tecniche e recensioni nonche' (e sopratutto ) delle dimensioni dell' oggetto. E qui veniamo all' installazione. e ai problemi di posizionamento egregiamente risolti. Non scrivero' dell' installazione del sistema che e' di fatto semplice e non richiede grosse capacita' idrauliche / meccaniche ed e' assolutamente alla portata di non professionisti. Vorrei invece parlare del suo posizionamento nel mobile della cucina che come potete vedere dalle foto è costituito da due cassettoni nella parte del lavello come si trovano spesso nelle cucine moderne. il problema nasce dal fatto che i cassettoni occupano buona parte del volume del modulo e quindi un posizionamento all'interno di uno dei cassettoni (sacrificando eventualmente i bidoncini dell' immondizia) e' impossibile. Altra considerazione: Il Frizzlife PD600 NON PUO' essere installato orizzontalmente e quindi un installazione sotto lo zoccolo della cucina non e' possibile. Per ovviare al problema ho installato il PD600 nello spazio vuoto interno al lato dx del lavello lasciato libero dai due cassettoni chiusi (vedere foto e Video) fissando con delle staffe , una mensola al mobile della cucina. Ecco il perche' dell'attenta valutazione delle dimensioni. Altri prodotti semplicemente non ci stavano e avrebbero richiesto un installazione in un altra parte del mobile poco congeniale alle mie esigenze. La mia non e' una soluzione definitiva per tutti i modelli di cucina con cassettoni ma chi dovesse avere questo problema puo' verificare le proprie misure e valutarne la fattibilità . Il filtro mineralizzatore e' stato invece semplicemente appoggiato alla parete perche' con il suo sostegno da muro sporgeva troppo e non si chiudeva il cassettone. Per completare l'impianto ho voluto installare per maggiore sicurezza mia personale una lampada UV poco prima del rubinetto. Ho optato per un rubinetto a 3 vie piuttosto che il rubinettino in dotazione per un semplice fattore estetico della cucina (e perche' non volevo forare il piano infragranite ) Veniamo ora all'utilizzo e alle considerazioni sui risultati delle analisi. Il PD600 TAM3 funziona egregiamente, l'acqua scorre immediatamente appena si apre il rubinetto e con un buon flusso compatibile con quanto dichiarato dalla casa (600 galloni al giorno = 1,5 l al minuto ) quindi poco meno di un minuto per riempire la tipica bottiglia di acqua da 1 litro e mezzo. L'acqua al gusto e' molto buona nessun retrogusto strano e per quello che riguarda le analisi fatte eseguire da un laboratorio specializzato si evince che il fitro osmosi lavora bene tenendo i valori chimici di potabilità ampiamente al di sotto di quanto stabilito per legge. E' chiaro che essendo acqua di rete , la potabilità e' garantita dal fornitore , ciò non toglie che al rubinetto ,lungo tutto il percorso dall'acquedotto fino a casa non possano intervenire fattori che inquinano e peggiorano l'acqua. I valori fuori norma di durezza sono invece dovuti alla mia personale configurazione dell'addolcitore ,quindi e' una cosa nota e voluta. Per quello che riguarda il pH incide sicuramente il filtro TAM che dovrebbe essere sostituito dopo un anno di utilizzo , e un ph di partenza (acqua di rete ) generalmente sul limite basso dei 6,5 Le analisi biologiche non presentano criticità anzi tutti i valori si attestano sullo zero. Quanto incida la lampada UV non e' quantificabile perche' andrebbe fatta un analisi bypassando la lampada e ponendo i dati a confronto. Mi sento di dire che per un installazione "standard" su acqua di rete pubblica la lampada e' un surplus visto che la menbrana ad osmosi filtra veramente il decimo di micron e quindi anche i batteri e virus. L'unica situazione critica puo' essere il ristagno di acqua nel filtro TAM che e' a valle della membrana e prima del rubinetto ma che puo' essere evitata facendo scorrere l'acqua alcuni secondi prima di utilizzarla. Conclusioni: Il sistema osmosi Frizzlife PD600 TAM3 soddisfa pienamente le mie aspettative fornendo risultati ottimi spendendo un decimo di quello che propongono i vari "venditori tradizionali" ed evitando costosi contratti di manutenzione. Partendo da un TDS di 440 ppm (quantità' di sostanze disciolte nell'acqua) dell'acqua della mia zona, il sistema Frizzlife PD600 fornisce acqua da bere buonissima con un TDS costantemente a 20 ppm filtrando piu' del 95% delle sostanze disciolte in acqua I filtri di ricambio, così come la Membrana ad osmosi hanno dei costi abbordabili e una semplicita' di manutenzione che non richiede personale specializzato.Dopo un anno di utilizzo le spie di sostituzione filtri sono ancora spente , ricordo che l'azienda dichiara la durata di 1 anno per il primo stadio e per il filtro TAM3 mentre e' di 2 anni la durata del filtro osmosi. Per esperienza personale , la presenza di un filtro a cotone e di un addolcitore a monte dell' impianto aiuta e aumenta la durata dei filtri ad osmosi. Speriamo nella reperibilità dei ricambi nel lungo termine. In questo anno ho avuto modo di confrontarmi con il servizio clienti e supporto tecnico di Frizzlife e devo dire che la comunicazione e' stata ottima (solo in lingua inglese però). Ad oggi mi sento di consigliare a pieni voti questo prodotto

Works as described. Excellent installation instructions which are easy to follow and has a help line to assist you. It has improved my well water in taste where we use it all the time

Depuis plus d’un an, je sens qu’il y a des polymères (plastiques) dans l’eau, que ce soit de l’eau qui vient directement de la source « Villers et Bioul en Belgique », l’eau vendue en bouteille et même celle du robinet, à croire que l’on veut nous empoisonner. J’ai fini par investir dans un premier temps dans le système de filtre à eau sous évier Frizzlife SK99-NEW, l’eau à une meilleure qualité, mais elle n’est toujours pas potable. Ensuite j’ai ajouté en srotie de cette première installation ce système de filtration d'eau par osmose inverse RO - 800 GPD. Pour le prix que tout cela m’a couté, je suis vraiment déçu du résultat, le goût des polymères est toujours présent. La seule façon que j’ai trouvé pour avoir une eau moins polluée, c’est de faire bouillir l’eau qui vient de l’osmoseur, en mettant des éponges en inox dans la casserole, ces éponges du genre « Tampon Gex en inox » emprisonnent une partie de ces plastiques qui s’agglutine aux parois de l’éponge due à la chaleur, mais le goût est toujours infect, car il en reste encore dans l’eau.