Drive Medical Overbed Table with Wheels - Secure Height Adjustment for Comfort - Non Tilt Surface - Smooth Rolling Design - Home & Hospital Use - Woodgrain Laminate Top - Silver Vein

Ordered one for wife's use in bed and one for me with recliner. These are large, sturdy, and steady, of hospital quality. Assembly was fairly easy but needed 10mm metric wrench, somewhat heavy parts/ awkward. Assembled them on bed for working surface, some bolts were a little difficult to thread due to paint in threaded holes. Also ordered a wooden book holder as table does not tilt.

Took my mama only 15min to build, it's super sturdy, and it moves up n down so easily! Adjusted it to a perfect height for my bed and it fits my laptop and nightstand contents so I can alternate between work-mode and rest-mode. My carpet is really short n stiff so it rolls over it pretty well, though if youre as weak as me it can be heavy if you wanna move it more than a few feet at a time. Luckily I only need to swivel it a few inches to go from working to resting, so it makes a perfect addition to my bedside. I love how much I can fit on it and how sturdy it feels!

Having a loved family member being bed ridden for two years and counting, this has been one of the more most essential items for him in the last two years. It rolls around the main floor and provides him with a reliable table that can expand up and sink down to a height that fits him on the sofa or in bed. Good for eating food, setting a tablet, holding drinks, and the list goes on. After about 2 years, the functions began to show in the spring mechanism. It no longer held the position reliably and the wheels began showing major signs of isssues when one roller totally cracked in half. The wheels are near impossible to source online. Had to get another set. Works like new again and not overly expensive.

I had a family member return from the hospital in December and she was still shaky when it came to sitting at the table. Considering she is either on the couch or in bed for the time being, I thought it best to procure a similar medical table like the one she ate with during her stay at the hospital. I discovered this medical over bed table, which had helpful features for the great price listed, such as wheels and it is easily adjustable. The setup was simple and only took about 20 to 30 minutes to complete. However, the only reason I gave this medical table 4 stars was because there were two small cracks on the board and the packaging wasn't damaged, so I assume it may have been defective. Thankfully, Amazon provided a replacement.

I got this table to use while relaxing in my lounger in our game room so I can comfortably play World of Warcraft and browse the internet on my laptop. I'd previously used a lap desk, but I wanted a free-standing table not reliant on my lap. I'd looked at some smaller laptop tables, but wanted ample room for my mouse and whatever else, so I thought a table like this would be a great option. Overall it went smoothly, but there were a couple things I thought would be helpful to point out. Packaging The table was packaged well and the table top wrapped in plastic to protect it. All the hardware was packaged neatly and numbered according to the instructions. There were two straps around the box to keep it secured, but you could tell people had lifted it by those straps so they had cut into the box slightly. That didn't appear to cause any damage. My only packaging complaint is they screwed the mounting bracket through the plastic so I had to loosen the 8 screws to cleanly remove it. Assembly & Instructions I assembled this myself in a leisurely 30ish minutes. Some of that time was spent getting tools and petting dogs. You will need a large Phillips head screwdriver, 10mm wrench and they say a 16mm wrench, which I didn't have in my wrench set, but I used a 5/8" wrench successfully instead. I thought the instructions were very well written, easy to follow and clear. I included photos of the instructions so you can decide for yourself. The only assembly challenge I had was in step 5 - the holes didn't align properly. So I loosened the nut in step 4, adjusted the bracket and everything lined up. So maybe wait to completely tighten the nut in step 4 until you've ensured those holes are lined up. Lift Mechanism In reading the reviews, I was a bit worried that any time I barely grazed the table, it would pop up and fling my laptop across the room. That is not the case, fortunately. I can bump the bottom of the table pretty hard, and it only slightly moves up in small increments. If you open palm the bottom of the table (like waiters hold serving trays) you can slide the table up. It's not the smoothest action, since the lift rod keeps it from flying up, but it's not bad. I set my drink on it, pushed up and was fine. Nothing wild happened. The lowering lever is easy to use (especially when installed correctly). I'm starting to get arthritis in my hands and have somewhat poor grip, so it's nice to be able to use this lever with ease. Lowering is very smooth and simple. Sturdiness I expect to rarely have more than my laptop and mouse on here, so I'm not super concerned about a weight limit, but pressing down on the table, it feels sufficiently sturdy. Quality Structurally, I think the quality is great. It didn't take much to put it together and it feels strong. The table top does have some small chips around the edges where it was cut and I imagine I'm going to wear it down more by resting my arms on the edge. If it gets bad, I'll just wrap it in a PVC countertop wrap (like from EZ FAUX DECOR, which we used in our kitchen). The wheels are pretty basic wheels, nothing fancy, but they work great. Size The tabletop measures 15x30 inches. I can comfortably fit my laptop and mouse with room to spare. Overall This table is exactly what I wanted. It was easy to put together, it's easy to use and it's very sturdy. I'm so pleased with this table and recommend it for anyone wanting a reasonably priced, decently-sized, roll-around table that fits nicely around furniture. I hope this was helpful!

Love it! My husband thought the instructions could have been better. The height level jiggles but once set to perfect height I use tape to hold it still. Saved $10 by not getting the oak color, once loaded with drinks and iPad etc. the color doesn’t even matter. If I had to do it again, I like the simplicity of the black look. I can see how it will be useful for every day use. Post surgery saves me from twisting sideways to use a standard tray beside the bed.

Gran relación precio - calidad. Excelente producto. Muy satisfecho con la funcionalidad, características y calidad del producto. Sin duda lo recomendaría ampliamente.

Can't beat it for the price. I bought this table prior to having surgery to have next to my bed during recovery. It holds all the things I need, and I can easily roll it towards me or away while in bed. This made items really easy to reach when I lacked mobility. The table was easy to assemble watching the video that's available on the item's page. We used the video more than the enclosed instructions. Seems like the manufacturer might have improved the item, as nothing sprang out at us when we were assembling it. There is actually a long screw that secures the mechanism while you build it, and it's the last thing to come out at the end, so be sure to FOLLOW THE INSTRUCTIONS! There was a small rattling noise once it was fully assembled, but turned out that it was the handle, and I solved the problem by wedging a small piece of cardboard in under it.

Satisfied with table. Need to put quite a lot of pressure on it to put into low position.

ممتازة

Perfect for post operation recovery while confined to bed, quality was great and used for duration of recovery!!