Front Bumper Reflector Side Marker Lights For BMW F30 3 Series F32 F33 F36 4-Series (Smoke Lens)

I installed these GSRECY front bumper side marker lights on my F30, and I’m honestly impressed with the visual upgrade. The smoke lens gives the front end a more aggressive, modern look without being too flashy — subtle, but noticeable. Installation was pretty simple. The lights fit perfectly into the stock slots, and the clips held securely. Wiring was straightforward — plug-and-play style — and everything lit up perfectly the first time. The build quality feels solid, and the smoke lens has a nice finish that looks premium compared to the stock reflectors. Driving around at night, these side markers look really clean and integrate well with the existing lighting. Even friends who are familiar with BMWs commented on the upgraded look. It’s a small upgrade with a surprisingly big visual impact. If you want to add a touch of style and a slightly sportier look to your BMW’s front end without replacing the entire bumper, these side markers are an easy and affordable way to do it. Solid quality, perfect fit, and a noticeable improvement in aestheti

Worked great and fit flush on my f32. Highly recommend for that clean look on the front end

I am very impressed and satisfied with the look and quality of these gray reflectors. They are actually dark gray. But when I first placed them to test fitment after removing the OEM ones, I realized the tape that came with them was to thin and it would not sit flush to the bumper. I ended up removing the double side tape that came with them and used a thicker 3M one. Once I placed them to the bumper then it fit flushed. That was the one thing I had to do to make them flush and look almost like OEM.

easy to install , heat gun recommended to remove OEM adhesive

Bumper from a 2017 BMW 330i. Reflectors fit as intended, definitely needed to swap out the adhesive for something stronger. It wouldn't hold them in the bumper from the first install, so I put a stronger adhesive and have no issues. They look stock.

Don’t pay 80$ for these from a tuning site. The quality of these are great even for my m4cs. They even come with new double side tape

Could be slimmer to fit better on the bumper they overlap a lot, get the job done but don’t look right

Glue was bad and item kept falling out

Fits really well and looks to be good quality, just make sure to remove all the previous 3M tape after removing the original reflectors or these new ones won't sit flush. Getting rid of the orange made a huge difference. Looks much cleaner now.

Excellent product. Perfect fit

Very nice seriously! It changes the look of the car! Very happy about it!

Nice aggressive touch to remove the N-A spec front bumper reflectors of F32 BMWs. DIY installation is quite demanding: Turn on car and turn wheels to make inner wheel well accessible. Use a heat gun from proximity to loosen the glue on the original reflectors. Slowly push out OEM reflectors with fingers but make sure not to crack or break the moulds. Beware of ripping wiring of front bumper cameras (if your car has them); ideally, unplug these wires from the inside wheel well to avoid damaging them. Clean glue residue off the inside of the bumper. Once clean, carefully apply new reflectors from inside of the wheel well and maintaining pressure for a minute or so to make sure properly stuck on. FInal product is a nice change from the OEM reflectors and definitely adds some spice to the car's front end.

i ordered the smoke ones. I gave 3 stars because it's just black piece of plastic. they are not smoked reflectors they are basically reflector delete . other than that fitment is perfect. I have seen a smoked on other car they reflects with light.