WEN CT9502 100-Inch Track Saw Track Guide Rail and Adapters

Great tracks for ripping a sheet without the table saw.

Nice straight and true

Good product fast shipping

Let me begin by saying this track is listed for the Wen, Makita & Festool saws - but I own the Dewalt cordless track saw. Back to that in a minute. This track arrived on time and packaged very well. Both sections of track as well as the two connector bars were included. There were no dings or damage to the track. The included connectors were missing 3 set screws though to secure them in place. Although not happy, I happened to have replacements in stock. This track connects a bit odd in my opinion with one connector on the top and one on the bottom. Putting the 2 track half’s together is relatively easy but there is a very slight lip on the side opposite the track connectors. I just used a flat metal file to smooth it out. Not a huge deal just a bit of an annoyance. As far as the full length of track goes, is a little too flexible and thin for my taste. I wouldn’t hold it by one end in the air with more than one section of track , rather hold it in the middle for fear of it bending. Overall, it’s solid enough to use, it’s straight and for the price point you can’t beat it. Back to the Dewalt saw.. I don’t like the design of the Dewalt track as I can’t connect router accessories to the one side which is why I thought I would try this track. The catch is, there is an overhang of a few mm on this track that prevent the Dewalt saw from sitting flat. I ended up flipping the track over and running it down my table saw to trim the aluminum off flush. Now it works just fine.

I bought these tracks to go with my Evolution track saw. They work better than the actual Evolution tracks that came with the saw which are 3 short pieces totaling 40”. This pair of Wen tracks are ideal for ripping 8’ material. They are sturdy and accurate. Now I don’t have to keep up as much with which edge is factory on sheet materials. With the right blade, every cut is just as good as the factory edges. I have used these to rip straight edges on rough sawn lumber as well. Well worth the price!

These work on the Milwaukee track saw. There is very little difference in the tolerances when mounting the saw on the track. Just the slightest tweak to get it gliding smoothly. Additionally, the slot for the 45 degree cuts works so that the saw doesn't tip. The only thing they should do is make them a little longer to allow for a little more room on each side when using a single track for a 4ft wide plywood cut but it still works perfectly well as it is. This is a great value if you want to save money over the OEM options.

Bought this whole system. To be honest I am cant I waited so long. This has saved me so much time and is amazingly accurate. No more hauling out table saw and wrestling with it to cut 4x8 sheets of ply. Do yourself a favor and buy the whole kit. You will not regret it. Don’t listen to the old grumpy guy saying you don’t need just clamp a board to it. The clamp set up and tracks are simply fantastic. I am now 2 years on it and it has paid for itself simply by being precise.Long review but I just love it and got grief for buying but glad I did

I bought this back in December of 22. I didn't have time to fuss with it right away and didn't use my track saw for a while ( I'm a field carpenter and go thru spurts of tool usage.) So after the return period ended, I pull these out to set them up with my saw. Imagine my surprise when the wen track saw I've had since 2018 or 19 won't sit properly on my new WEN tracks. I put them away knowing my old track saw was getting near the end of its life ( I beat it pretty mercilessly in the first couple years of ownership) and waited until it was time for a new track saw. Which leads us to this last week. This track is perfect with my new Makita cordless track saw. The saw has no slop on the rail and I'm stoked.

Best quality and well product. I suggest everyone go for it blindly.

*TLDR = cheap, well worth the money, not a pro every day use track saw by any means, surprisingly straight. ***** update 2 years: used it as a weekend warrior making furniture and cutting sheet goods. Dropped it more than once, still working fantastic. Will buy again if it quits. I had a project that required a track saw to break down sheet goods. Only had that one project, but the cut needed to be precise and I had enough pieces to cut to justify the price of a cheap track saw. The guides are really straight, even when joint together they are true. I compared them to my 6’ straight edge and there was no light between the guides and the straight edge. Really nice, the rubber strip holds on well, the saw glides good. The only downside is the length, as others said. This is too short. Should have been min 55” each piece. The saw is what you get for 150$. A lot of plastic. But for the diyer it looks sturdy enough. The blade run true, the adjustment cam does the job, no side to side play in the tracks. Because of the short track, the kickback mechanism is useless. Took it off to my own risks. Overall, for that price, it is wonderful for what I do. I would buy again if I had too

Un buen producto calidad precio

Just to justify a low rating here which I see is related to a saw itself, I'm gonna say next: I just bought a track saw guide rails and after 8 years of Festool usage and sticking to “the best” I'm literally overwhelmed how well made these are. Tracks are completely straight. I mean for the price you pay you don't just get a “cheap” solution, you get a track guide that is not even a bit worse than Festool or the others. The only disadvantage of it for me as I cut sheet materials with it at most is the length (only 50” when separate) but at the same time it's great for on site trimming purposes. It also has saw anti-falling groove feature that works great as well if you need it (unlike Festool tracks). So overall I would definitely recommend the product to someone else with no doubt.

Gracias