Screwpop Screwdriver Universal Magnetic Bit Holder for Keychain | Carabiner Multi-Tool Bottle Opener (Includes Removable Double-Sided Phillips and Flathead Bit)

I've tried all sorts of EDC screwdrivers and multitools and pry bars with the ability to drive screws. Ideally you want something that is small and light, but where you can get some decent torque when needed and also "fast" drive the screw when it is loosened. The best dedicated pocket driver I have found is the 711L Lollipop. It does it all but it is pricey and even the Lollipop can be too big to carry all the time "just in case" since you also have to carry bits for it. The best driver that hides on your keychain is the Screwpop. The design of the Screwpop has a couple of things going for it. First, the circular "handle" allows you to get a surprising amount of leverage to torque a screw. Much more than say the Otacle D1 or any driver with a small handle not much wider than the shaft. You can get even more torque with the Screwpop if you put a metal pen through the "hole" to create a full on T-handle. Second, the shaft of the driver allows you to pinch the driver in place with your weakside hand while the working hand regrips the handle. So you never have to disengage the screw and "find your place." With so many pry bars and multitool drivers, this is very awkward or impossible to do. Here it is straightforward. Finally, the magnetic bit holder of the Screwpop accepts normal quarter-inch bits as well as at least two brands of double-sided quarter-inch bits: Leatherman-style flat bits (pictured) and the Steinwhale Stubby double-ended bits found in their 10-in-1 kit. Both of these bits are very easy to carry and give you a ton of options. Did I mention the bottle cap lifter? All in all, this offers a lot of capability in a very small package. It is as impressive an EDC tool as their famed Ron's utility knife. What a great American company!

I have been looking for a nice travel sized bottle opener. This kicks it up a notch with a screwdriver. It has a magnetic base which holds in the bit, which is reversable phillips/flat. Easier to use than my other folding multitools.

The design is what a screw driver on a keychain should be. Basically what this is is a 1/4 inch ratchet bit extension, welded to a rigid metal ring. It is totally simplistic and minimalist. It strongly holds all 1/4 inch bits and gives you comfortable leverage that has a minimum weight and takes a minimum amount of space. It is the smallest driver that is truly useable. For a keychain, all other drivers are less practical. There are smaller ones that do not have enough strength or leverage. Most are larger and are bulky or heavy. Don't even think about using small folding multitool screwdrivers. They will either fold on you, twist, OR if you chew up the point, your multitool is ruined, with no way to replace bits. So design-wise, this is it for a keychain. I do think it would be cool for the company to make a titanium version, but I do not see in the comments that they fail. Additional. I received the tool and have run it through some use. The zinc alloy they use makes the tool very light and pleasant on the keychain. I had made one but it is twice as heavy as this one. It is comfortable to hold and performs well. The bit that comes with the tool fits loosely and feels light in the hand. I imagine it twisting and breaking under pressure. Using standard tool-grade one ended, one inch bits fits well and has more surface contact with the hex socket. The zinc is good for being light, but i am sure there was a trade in strength. So keep your use light to moderate. If you have to strain, it is time to get your big driver out. Overall, I like this tool very much and it will be the screwdriver tool that I carry on my keychain. Used in its appropriate range with tool grade bits, I give this a 5 star rating

Would have never expected such a small tool to be so useful. But I stand corrected. This little tool comes with a double sided standard screwdriver bit with Phillips and Standard/Flat ends. The end that holds the bit is magnetic to prevent the bit from falling out. And there's a bottle opener that I haven't used yet on the other end, so I'm just gonna assume that works. This tool is quite small and fits great in the small EDC pouch I keep my olight and Fischer space pen in, but is still usable for most projects like this is intended for. It's not intended to build a bookcase or assemble a desk. But it works great to tighten a few screws or fix something when you don't have a full sized screwdriver handy. Absolutely 10/10 product.

A few days after I received the multi-tool, the magnet inside shattered. The seller replaced it and sent the carabiner light and pocket wrench by screwpop. A few months later I lost one of the bits. I contacted the manufacturer screwpop and they sent me a few extra bits. excellent product and even more excellent customer service by both the seller and manufacturer. This tool is about as handy as you are. But don't expect it to drive any screws into undrilled holes or take out 3" screws.

Hard to think that this would fit in a girls pocket. It hardly fits in my jeans. I've had it for a few months, but now I just keep it in my key bowl for quick tightenings. The concept of the product, though, is to be portable. Can't believe I'm saying this, but it might be a little to "sturdy" for what it's trying to do. If the ring were thinner it would be more likely to be on my keychain instead of left at home.

Fits with the keys very well and is very useful. I prefer it even to most multi-tools. Bit hardness is medium, so wears kinda quick and I've already twisted mine a little. Milwaukee carries a similar bit that I'll be replacing this one with. Having the hex is handy for use with any available hex bits even if they do sit a little deep. Bottle opener is a champ and works well even on a pretty full Keychain.

The internal magnet fell out literally the very first time I used it. Without it, the bit now won’t stay in place and just falls out. Very disappointing.

Je ne recommande pas l'achat de ce Screwpop. La couleur indiquée n'est pas respectée : l'outil n'est pas noir. Par ailleurs contrairement au descriptif l'outil n'est pas aimenté mais il dispose d'une petite bille de blocage et il est de mauvaise facture. Peut-être une contrefaçon ?

愛用のキーホルダーに付けて、日々持ち歩いています。 プラスとマイナスのビットが、いざというときに役立ち、とても重宝しています。 マグネットの強さも程よく、使い勝手が良いです。 塗装が少し剥がれてきましたが、それも使用感として味が出てきたように感じており、気に入っています。

Falsches Produkt erhalten? Im Gegensatz zu der Beschreibung in den Bildern ist das Ding nicht magnetisch, der Bit wird von einer kleinen Kugel gehalten, es ist einfach silbern. Im inneren ist Rost, kann weggekratz werden. Das Produkt sieht billig verarbeitet aus. Der Bit ist von der Sorte billiger Bits die bei der ersten Schraube nachgeben. Normale Bits passen nicht. Nach dem Auspacken sind mir auch Unterschiede in der Verpackung aufgefallen. Ich würde gerne 0 Sterne geben.

残念ながら粗雑です。まあ、値段なりというか、、。同時に購入したもののほうが、予備ビットも同時にキャリーできたり、LEDライトが装備されていたり、ビットのソケットがクロスとストレートの療法で取り付け可能だったりと、よほど優秀でした。

Seems like a useful tool. Only reason it’s loosing points so because mine was silver and had a hit of surface rust. No problem at this price tag, just not 100% as advertised. The hex bit sits snugly and has a small retention ball to reduce the chances of loss. All in all - useful little tool.