JACKYLED 20Packs L Shape 4-Pin LED Connectors with 22Pcs Clips 10mm for Strip Lights - 10mm 4pin

Works great

Worked perfectly for my project. You have to make sure that you're getting the correct ones for the light strip that you have. Also note that you need to tuck the LED strip under the connector. There are guides on the left and the right side to make sure you get a good connection.

The provided 90 deg connectors plug is easily to the other connectors. Plugging in LED strip lights is difficult to do because there is not anyway to push in the LED strip lights. The strip lights are very flexible making it difficult to push them into the connections…

I bought 2 strips of LED lights for our TVs and I really wish I had known about these before I set up the first. Included in photos is how the first is set up with bulging wiring at the corners that is noticeable as it starts to peel throughout the day. The other is our other TV that I did after researching a bit and ordering these. They are easy to use. I do have experience with wiring but not with small electronic flexible circuits and these were straight forward and simple. Even with the offset 3 pin 10mm Monster uses, using a 4 pin 10mm allowed contact with a blank space and they work flawlessly. No issues with colors. I do wish they came in black to blend in with things like tvs but if you hide them well you can't even see them from the front. Excellent and helpful for running led wiring around odd bends as they do have a little flex themselves but remain flat. Will definitely be giving our other tv the 90° treatment soon.

So I have mixed feelings on these. Do they work? Yes. Are they cheap price wise, also yes. I have to major gripes with these though: 1) the pins don't line up with than any of the strip lights I bought. I have 3 different brand of lights and each brand of lights the solder strips are exactly the same width. The solder points on these are different than all 3 of my light brands, while yes you can get them to still connect you have to be very very accurate on your alignment otherwise it will be crossing over solder points and you risk frying your lights. 2) these are super thin and tear pretty easily. I put lights up around my exterior windows for year round lighting and on 3 separate occasions as I went to install them after making all my solders in the garage they tore on installion meaning I had to go back and redo it. I figured out on my last strand a trick to reduce the risk of tearing. I already was putting hot glue over all my solders to protect it from the elements but I then started covering the entire 90degree elbow in hot glue, front and back, just to create some rigidity in them. It's ugly but it will be behind a light defusing cover so it won't be seen. Not the best solution but it helped with install and reduced the risk of tearing. So, final thoughts. Yes they work, but barely. If you got patience and steady hands for the soldering you can make it work, otherwise find ones with wider contact points.

I bought this based on Amazon‘s recommendation. The extra clips and connectors made all the difference in a smooth installation.

I recently purchased the JACKYLED L Shape 4-Pin LED Connectors 10-Pack with 22Pcs Clips 10mm for Strip Lights, and I must say, I was thoroughly disappointed with the product. Firstly, the quality of these connectors is subpar at best. Upon receiving them, I immediately noticed flimsy construction and cheap materials. The connectors felt fragile and easily breakable, which is a huge concern considering they're meant to secure and maintain connections for strip lights. The design of these connectors is also a significant issue. They are cumbersome to work with and don't provide a secure connection for the strip lights. The clips included in the pack are not sturdy enough to hold the strips in place, leading to constant disconnections and interruptions in the lighting system. Furthermore, the 4-pin design seems flawed, as it often resulted in poor connectivity. I experienced frequent flickering or complete failure of the lights due to inconsistent contact between the strips and connectors. To add to the frustration, the package lacked clear instructions, making it challenging for even someone with experience in LED installations to figure out the proper way to use these connectors effectively. Considering the price point, the quality and functionality of these connectors are far below acceptable standards. I expected a reliable solution for connecting LED strip lights, but JACKYLED's product failed miserably in delivering that. Overall, I would strongly advise against purchasing the JACKYLED L Shape 4-Pin LED Connectors 10-Pack with 22Pcs Clips 10mm for Strip Lights. They are a waste of money and effort, offering poor quality, unreliable connections, and a frustrating installation experience.

Funciona muy bien

Maltrataron mis led

I paid for 22 clips and 20 LED connectors but only 13 were delivered. Not honest.

5 نجوم لانها مطابقه للوصف و الصور , اما الجوده تقضي غرض

Does it’s job....sometimes... some of the connectors completely change the colour of the strips - due to connected problems - had to keep changing connectors But it’s cheap and comes in large quantities so...kinda happy with it

Awesome cheap and does the job