MasonryDefender Patio Paver Sealer - Low Gloss, Clear, Water-Based, Masonry Sealer - 2.5 Gallon

This stuff was great. I had no problems putting it down. I'm 70-year-old woman and I put it down myself or my back patio. Just follow the directions and it came out beautiful. Nothing bad to say about it Yes it's water resistant. It went on smooth and no problems

I buy this every year to seal my brick walkway after applying sand as grout. It hardens the sand and makes the whole thing water repellent. It’s expensive but it works

I applied this using a roller and brush (the pump garden sprayer wouldn't work - likely a poor quality sprayer). The sand comes out of the cracks and onto the brick with this type of application, leaving a rough texture. Not a big deal though, as long as the sand stays put. However, it took WAY more product to cover my small patio than what was stated on the package (at least twice as much) when using this method, and still didn't get into the space between the cracks. I bought a second bottle to finish the job. The second round, I went over the bricks to dust off as much sand as possible before it dried, so there weren't clumps of sand sealed in top of the bricks. I also went through with a squeeze bottle filled with sealer and another filled with sand, to fill in the areas where the roller had picked up too much sand during the first go-round. I wish I would have known this "roll-brush-fill" method the first time, it would have resulted in a much nicer patio, but it doesn't look bad the way it is. I really like the low gloss look. High-gloss would look out if place with this rustic brick patio. I recommend this product for patio projects. It's sealed and protected without looking fake.

Perfect product for my patio refurbishment project👍👍

East coverage, excellent water sealant and just enough gloss to enhance color and sheen. Not slippery too

I used on a couple of small brick walkways. Follow the instructions and try to avoid the rain for at least 8 hours. The product has held my sand joints steady through at least 3 heavy rains. One coat on, wait 2 hours and put a 2nd coat on. I used a pressurized spray container and then used a paint roller to even it out. I sprayed a little heavier on the sand joint but covered it all with the product. It’s a great buy and looks fantastic.

Really works well on pavers.

I have used other products for my pavers in the past and this is by far the best that I have ever used. It actually does get into the cracks and sealed the sand in and it has a nice mild shine to it. well worth the price, it will take 2 coats for a slight shine and more if you want a more detailed shine. I used a sprayer which worked well. It does cost a lot, but considering what it would cost to have someone else do the project it is cheap.