Corsair CML16GX3M2A1600C10 Vengeance 16GB (2x8GB) DDR3 1600 MHz (PC3 12800) Desktop Memory 1.5V

Excellent RAM. As per almost everyone else. You will most likely need to go into BIOS and set for 1600mhz. I have used this Ram in a Gigabyte GA990FXA UD3 and also in an ASUS Crosshair V Formula Z. Both with AMD FX-8350's. I have overclocked the Gigabyte board to 4.7 by changing the multiplyer and voltage. While running the ram at 1610mhz, no problems. On the ASUS Formula Z I tried the ASUS Auto Overclock feature which changes the HT clock ,which also affects Ram speed. I let it go to 4.6ghz and the ram was running at 1685mhz at 1.5volts, Again , no problems. On both boards I used a Phanteks PH TC14pe (5 Heat Pipe) Air cooler. The clearance is about 1/2 inch above the Ram heat spreaders on both boards. With a little finesse there is no need to remove the cpu cooler to install or remove this Low Profile Ram. As a note, I also use 7Gb of the Corsair 16gb kit for RamDisk (on both boards) using it for temp Internet Files (set to 1024mb, Auto Update and do not delete), also allowing me to use the remaining 6GB of RamDisk for often used games or Photo editing files. Doing this gives you a data transfer rate of about 6,000MBps, far faster than my SSD's of 500MBps. Doing this greatly speeds loading of Internet pages you use often, as well as any program or files loaded on the RamDisk. The current "sweet spot" for ram amount is 8 to 16gb. at 1600mhz or 1866mhz. However, the AMD website says only 2 slots at 1866mhz. Although many find they can run 32gb in 4 slots at 1866 or above. This will depend upon the individual Integrated Memory controller on the CPU and the Motherboard. At the speed difference between 1600 and 1866, that represents only a few tenths of milliseconds difference in overall through-put. No noticeable difference to the observer. The reason you may want to exceed the 8gb or 16gb "Sweet Spot", would be to run large Photo Editing, video rendering or large RamDisk. Overall I highly recommend Corsair and this 16GB (C10) Ram Kit. Having said that, IF you can comply with the QVL (Qualified Vendors List), for your Mother Board maker I recommend it. But you will see a disclaimer on the Gigabyte QVL that says "Memory modules listed below are for reference only. Due to massive memory models on the market, we can only verify some of them." Also Note: This RAM is NOT listed on either QVL for the Formula Z or the UD3, but it WORKS. (The C9 IS listed.) But from my usage, it works great on the ASUS Crosshair V Formula Z and the Gigabyte GA990FXA UD3. Update: I just received another 16gb kit and the upgrade to 32gb was smooth on the Asus Formula Z.

No complaints when installed on a new MSI Performance Gaming motherboard. Plug and play as RAM often is. Verified the sticks were running at the 2666 Mhz advertised using CPU-Z and the rest is history. I mostly bought this ram for its low profile as I have a massive Hyper 212 Evo heat sync that is very close to the RAM slots. The RAM installed with ease but it did require me to remove the radiator fan from the CPU cooler on that side. Overall I love Corsair products and this RAM does not disappoint. I purchased another 16GB kit for my girlfriend's computer as well and it also has performed without issues.

I bought these to expand my computer's RAM to 24 GB. I use it for rendering, and in some big scenes I was runnig short of it. Low profile modules are perfect when you are using third party air cooling for your CPU, because most of them will be rignt on top of the first RAM Module in a standard motherboard layout. So I used my two 8GB modules on the first bank and the two 4GB modules on the second. Corsair Vengeance modules are reliable and fast enough (there are faster nowadays, but your motherboard and CPU must accept them). Never had any RAM related issues in my 3 years using them. They don't heat up. In my rig they are cooled by the case's fans, not by specific ones. There was no hassle at installation and were recognized at once by the BIOS. I'll stick with Corsair Vengeance modules for a while longer, even if faster ones come to replace them. They are my old faithful choice for RAM.

Only ram that is compatible with my current motherboard but works great!!

Great RAM kits. This is my second pair of this RAM and they work great. I bought these specifically because I am using the NH-D14 CPU cooler from Noctua and it doesn't have clearance for large heatsinks on the RAM sticks. These easily fit under the cooler and have always worked very well for me. The price is ok at around $70 but it's not great. I knew what I was buying and what I was paying so I can recommend it for the price.

Good product, I will enjoy the lifetime warranty... But I think I ordered a newer set as this model is over 3 years old and designed for sandy/ivy bridge support... These modules work with the 4th gen Haswell, but I get error 51 which gigabyte rep says this is perfectly fine as long as the board boots with no problems.

bon rapprot qualité prix- elle se sont bien installer, puis une grosse difference sur le rendement de l'ordinateur depuis. je recommande fortement si vous voulez upgrader votre ordinateur petit par petit sans vous ruiner.

Die Lieferung von Amazon war - wie gewohnt - schnell. Der Arbeitsspeicher wurde von meinem Gigabyte-Mainboard ohne Probleme erkannt. Da ich an meinem PC hauptsächlich Bildbearbeitung mache und immer wieder bei 4 GB Arbeitsspeicher Probleme bekommen habe, war es Zeit zum Aufrüsten. Ein 64-bit-Windows ist allerdings Voraussetzung, da die 32-bit-Versionen maximal 4 GB Arbeitsspeicher verwalten können. Die Frage bei mir war, 8 oder 16 GB Arbeitsspeicher. Ich habe mich für zukunftsträchtige(?) 16 GB entschieden, weil eines meiner Programme zur Foto-Bearbeitung schon 8 GB Arbeitsspeicher empfiehlt. Einen weiteren Effekt konnte ich mit dem neuen Arbeitsspeicher auch schon beobachten: Die Zusammensetzung von Panoramen geht jetzt doch schneller als vorher. Wer etwas Luft nach oben bei einem Compuer mit rechenintensiven Anwendungen (z.B. Foto- oder Videobearbeitung) haben möchte, dem kann ich diese Speicher von Corsair nur empfehlen.

Good item good delivery

Erg blij met de uitbreiding van mijn werkgeheugen. De metal sleef waarin het zit ben ik ook erg blij mee qua uiterlijk en maakt het ook makkelijker om erin en eruit te halen.

good