Mount Factory Heavy-Duty Full Motion TV Wall Mount - Articulating Swivel Bracket Fits Flat Screen Televisions from 42" to 70" (VESA 400 x 600 Compatible) - Tilt Swing Out Arm with 10' HDMI Cable

Excellent product, reasonably priced, used for my new LG OLED65E6P - comes with almost everything you need for installation including excellent hardware (excellent quality and strength hardware for secure installation) - mounts easily between standard 16" spaced wall studs, instructions are adequate, even comes with a small nut wrench & small level to be used for leveling the wall mount. It is very strong (100 pound screen) & can easily support my 65" LG OLED screen.Nice front to back tilt (locks in place), easy to adjust left, right, tilt and scissor function to either push screen flush with wall or pull it out up 19" from wall. Plastic snap on covers for hiding cable and mounting bolt screw heads for smooth lines and clean finish. Installation is 98% one person job as wall mount is in 2 main pieces, the main bracket that mounts on wall and the mounting plate that bolts to back of TV. Once ready to mount TV it is recommended to have another person help lift and slide TV onto wall bracket, once TV is slid onto bracket you no longer need your helper as it is locked on by weight of TV, just add two locking bolts to prevent TV from lifting off wall mount. Another cool thing is with the LG TV, the bottom brace of the mounting bracket lines up with the bottom of the TV (requires some movement of bracing bracket assembly to ensure proper fit and alignment) so measuring TV height from floor to bottom of TV is simple by using the bottom brace as measuring reference point - I mounted mine 38" from floor to TV bottom (56" from floor to Center of TV). At this point you can use tilt function to position TV screen downwards towards the seating area if needed. Tools needed - 1) I used a longer Level (36 to 48 inches - optional) to make it easier to draw a level line between 2x4 studs 2) A stud finder (optional) - once 1st stud is located then easy to find the second (measure 16") 3) Tape Measure or yardstick for measuring and for determining the correct height of TV / TV Wall mount 4) Drill or Drill/Impact driver (to drive 4" long hex bolts into the 2x4"s) or a regular drill & wrench/socket driver 5) Medium Screwdrivers (Philips & Flat tips) 6) You can use some grease to lube the lag bolt threads to make it easier to screw into the 2x4's if you are using a manual wrench Chris

Very nice mount, easy to install, study construction and works well on both my smaller and large flat screen TVs. I bought two, one for a 40 inch and one for a 65 inch and both are working exactly as advertised. The mounting is solid and allows full movement in or out, as well as a reasonable amount of angle to each side. The smaller tv can be swiveled up to about 75 degrees from center and the larger tv can move about 30 degrees either direction on swivel. The tilt is easy adjust and solid when locked. This seller was prompt and packed the product well. Very pleased overall. If you want a study reasonably priced mount, I recommend this one.

This is a fantastic mount. It is well designed, and well thought out, from the aesthetic and consumer aspects. Those who say it does not mount 200mm x 200mm VESA spacing are dead wrong. My 55" TCL Roku TV (32 lb) has 200 x 200 mounting centers and it mounted perfectly. Even the packaging states on the outside that it mounts 200 x 200. I love the shrouds that cover the wall mount and also serve as wire routing. Very well thought out. It covers the ugly skeletonized frame that most mounts leave you with. It moves easily and the balance of the gimbals are fantastic. I am a designer by trade and I know a good or bad design when I see one. This design is one of the best that I have ever seen. The price was amazing. Even at Walmart, a mount of this quality would have cost over $100. For informational purposes, the wall mount holes are 16" wide X 14" high. I would recommend this mount to anyone who is looking for a high quality mount that is strong, functional, and aesthetically pleasing.

This is a great TV mount, with a good design, offered at a very nice price. I've installed several mounts over the years for my own TVs, and as a part of cabinets for my clients, and its design, sturdiness, and finish compares very well, being second-to-none. The snap-off/on covers that hide the attachment bolts, as well as the snap-off/on cable management channels, make for a beautifully neat and highly-functional installation. The only "complaint" that I have with the design is that the screws used to lock the TV's rotation (and prevent the TV from being lifted off of the mount), and the screws used to lock the tilt into place, are both somewhat "hidden" and look like all of the other screws (black), such that without the directions it isn't at all obvious which screws should be loosened/removed to alter the position of the TV. This is especially true for the rotation/lift-off locking screws. Don't get me wrong, the directions themselves are the typical modern-day hieroglyphics (at least these have a few English words in case you're not as good as Carter in deciphering pictographs!), but in this case are clear enough that installation was a breeze -- what I'm concerned about is remembering how to take it apart in a few years when a TV needs to be removed for some reason. I have kept the directions in a drawer right near the TV, but we all know how easily those things get lost in the fog of time. My advise would be to use some paint or nail polish to put a dot of color on the head of the screws used to lock down adjustments, so that the screws are a bit more obvious in the future. I would not hesitate to use/recommend this TV mount again the future, just remembering to keep the directions as a part of the installation.

Versatile and solid. The bracket is made of, what seems to be very high grade steel, is able move and swivel my 65” c9 easily. Can’t fault this simple and reliable product