100-Pack Cat 6 Pass Through RJ45 Connectors, 50µ Gold Plated (Cat 6 Ends / Cat6 Connector /RJ45 Modular Plugs/Ethernet Plugs/Network Connector) for Solid or Stranded UTP Ethernet Cable

When you're working with ethernet cables, having quality connectors makes all the difference between a job that goes smoothly and one that's frustrating and wasteful. These Cable Matters connectors are the real deal – they're well-made, reliable, and designed to work perfectly with pass-through crimping tools. The pass-through design is what sets these apart from standard connectors. Instead of having to carefully trim and arrange the wires inside a closed connector, you can feed them all the way through, making sure everything's lined up correctly before you crimp. This dramatically reduces mistakes and wasted connectors. You can see exactly what you're doing, verify the wire order at a glance, and get consistent results every time. The gold plating on the contacts is a nice touch. That 50 micron gold plating isn't just for show – it provides better conductivity and resistance to corrosion compared to unplated connectors. When you're making cables that need to last and perform reliably, that kind of quality matters. You're not going to have issues with degraded connections or signal problems down the line. These are specifically designed for Cat 6 cable, and they fit perfectly. The sizing is spot on – not too tight where you're forcing the cable in, and not too loose where you don't get a secure connection. They accommodate the proper cable diameter and work smoothly with the crimping process. That proper fit is crucial for maintaining the cable's performance specifications. The build quality is consistently good across the pack. I haven't run into any defective or malformed connectors in the batch. Each one is properly manufactured with clean edges and properly aligned contacts. When you're buying a 100-pack, that consistency is important. You don't want to be sorting through looking for good ones or dealing with failures during installation. Having 100 connectors in a pack is incredibly practical. If you're doing any kind of volume work – whether it's wiring up a building, running cables for a network installation, or just handling multiple projects – you need a good supply of connectors on hand. Running out in the middle of a job is a hassle, and this quantity means you're well-stocked. Even if you're making mistakes or need to redo a few cables, you've got plenty to work with. The connectors work smoothly with standard pass-through crimping tools. The crimping action is clean, and the connectors secure properly without cracking or deforming. You get a solid, professional-looking crimp that's mechanically and electrically sound. The cable stays firmly attached, and the connection is reliable. Performance-wise, these maintain the Cat 6 specifications you need. When you're going to the trouble of using Cat 6 cable, you want connectors that won't be the weak link in your installation. These support the bandwidth and performance requirements without causing signal degradation or interference issues. Your network runs at the speed it should. The clear design is actually helpful. Being able to see the wire arrangement through the connector means you can quickly verify everything's correct even after it's crimped. That visual confirmation is useful for troubleshooting and quality checking your work. It's a small detail that adds practical value. Packaging is straightforward – they come in a container that keeps them organized and protected. You're not dealing with a loose bag where connectors are getting damaged or tangled. The container is resealable, so you can take out what you need and keep the rest in good condition. Value for money is excellent. When you break down the per-connector cost in a 100-pack, you're getting professional quality components at a price that makes sense. Compared to buying smaller quantities or dealing with cheap knockoffs that don't work reliably, this is the smarter investment. For anyone doing network cable installations, whether professionally or for personal projects, having a good supply of quality connectors is essential. These Cable Matters pass-through connectors deliver the quality and consistency you need to do the job right. They work well, they last, and they help you create reliable network connections that'll perform properly for years. Really satisfied with the quality and value this pack provides.

Great easy to work with and quality is good. Used for security system cameras run to wall plate and needed short cables to go from wall to system. Good clean signals. Also repaired some cables on router where little plastic lock breaks off. Just match coloring to end you cut off or the standard cat your using. Wow sticks thru so you can verify before crimping the use end snip to cut off excess.

Works as described. Was able to quickly place ustp into connectors and crip with littler to no effort. Was directly compatible to both my Kline and generic crip tools. Good value.

These ends are intended to be used with crimpers that cut off the wires that pass through the end. I have found these very easy to use and have not had any of the reported issues of not making a good connections. Far easier that the traditional ends where you need to know how long to cut the wires before crimping. I am using the Klein Tools VDV226-110 Wire Crimper with these ends. A good pair of crimpers will ensure a good connection. I would not suggest trying to cut the wires off after crimping, you will run into problems. I speak from experience. The only issue I have had is with smaller gauge wires, these are designed for 24-28 gauge stranded wires and will not work on 28 gauge solid wire. While I have used these with 24 gauge solid wire without issue, I would recommend getting ends designed for solid wire if that is what you are using. Use the right tools for the job and things will work better. Don't rate a product poorly if you are using it to do something it wasn't designed for.

When I swapped from a consumer grade router to a "pro-sumer" grade, I needed to recreate my network. That entails creating new cables, unless I wanted many feet of extra RJ-45 cable. I purchased a spool of cable and a crimper, then picked up these connectors. Works exactly as expected. Just strip off the casing, push the wires through the connector and crimp/cut the cable. Perfect every time.

Good product and well worth the price. Only real disadvantages are that it is difficult to see the different channels for the wires and the retainer tab will break off easily if bent the wrong direction.

This was my first time using pass through connectors and they are so much easier to use. No real measuring, just feed the wire through and the extra gets cut off when crimped. I only crimped a handful of these but all of them worked at full speed. For my home wiring job, I used everything Cable Matters (cable, connectors, keystones, wall plates, crimp tool) and everything worked great.

These connectors make terminating Cat6 very easy. It takes away much of the stress from using the older non-pass through style. Pair it with a reputable termination tool, and you can count on a solid connection. I highly recommend these for any job, even for PoE devices. I have been using these for years and I will keep using them.

Super

Decent quality and easy to crimp

👍🏼

Works well with cat 6 cables copper cables, both with and without the plastic separator. There's was someone mentioning issues with solid cables, those wires are thicker and in general it's always better to use wall-jacks for solid, to avoid long term issues, due to not being as durable when it comes to bending. Copper cables can also come in different sizes measured in AWG, so it's important to check that they fit. I had issues with aluminium/CCA cables which I was re-crimping, but CCA cables are always a nightmare with any plug, due to that they move around a lot, far more than copper.

Impec 👌