MAX SMART Tablet Holder for Bed & Couch with Ergonomic Hand Grip, Adjustable iPad Stand for Drawing, Reading, Streaming & Work, Hands-Free Tablet Holder Fits 6”-13.5” Tablets

i like that the tablet is sturdy enough for holding samsung ultra 8 so that i can do 1 arm operation(can hold maybe 10 minutes because weight of the tablet). Also good for 8 inch tablet. My version is tab active 2 water resistant version. Although it appear not fully grip because of the water resistant case(shown in picture). It actually did hold firm the tablet. Very satisfied wih the quality. I never intended to.use this for.stand because I am affraid it maybe become loose overtime. One thing I hope.probably a softer grip for arm comfort.

Update: just in the time it took Amazon to approve this review, I figured out how to contact the seller. EXCELLENT customer service so I’m super happy to update this review. As I said, the first holder I had for years. It has been essential part of my art practice which became a business. I loved the versatility of being able to hold it or sit it on a desktop. So when the first one broke, it was a no-brainer to order a replacement. This is my 2nd Max Smart. I love this design. I only purchased a new one because a side peg broke off. This new holder? Terrible! I’ve had it less than 3 months and the grip plate is unstable. I’m so dissatisfied and disappointed.

This is the best option I've been able to find for my iPad pro to hold it securely without fear of a drop, as well as provide many options for how to hold/articulate it with my hand(s) or put it on a surface. I can sit in bed or on the couch with the ring over my knee in portrait mode, and it's very stable for both swiping and typing. Surprisingly so. The base of the tablet rests on the front of the leg right above the knee joint (well, it's actually below if you are sitting), and it's very sturdy. The only negative I have found is that the "click" rotation has loosened after only a week of use, which is a little disappointing. The price is good, especially given the fact that you get two different size brackets. But it would be nice if they sold just the rotating part by itself so you could have an extra and even be able to use both brackets instead of having one sit in a drawer. But overall, I'm more impressed with this than most gadgets I buy. Like I said, I just wish the click mechanism would stay solid. That was a nice feel, so with the weakening, the whole product just feels less sturdy. My only other wish is that this had a deeper option on the brackets so you could opt to use it with the common covers for pros that are not removable and just flip around like a book. To use this bracket, I had to take my case off and leave my pro unprotected, which isn't ideal. I did order another kind of case with a removable face cover, so we'll see how that goes. But the fact that I ordered a different caee, and will shelve the nice case I had been using, is a testament to the usefulness of this product. Again, I just haven't seen or found anything quite like this out there. Thumbs up over all!

This thing is vital for big and small tablets. I have cases with stands, but noting comes close to this in terms of versatility. You can use this horizontally, vertically, adjust the angle as you like, use it with one hand, or even hang it somewhere. You can even use this to watch a movie with one hand while lying down, although you must have strong hands and have to change hands after a while, but it is an essential stand for my everyday use. I'm not drawing with my tablet, but this is something I will take with me everywhere, if you do use your tablet for drawing, this is a must.

WHY would you make such a well-designed device, with two size options per purchase, and leave a major size gap between the cases?? This device would have been absolutely perfect for my needs, but that minute (and REDONKEROUS) gap in the size is what killed that whole plan. My tablet, Samsung Galaxy Tab S6, without the case (6.5 x 9.5) and with the case (6 13/16 x 9 13/16) doesn't fit in EITHER of these attachments! Providing TWO separate parts to attach to different size tablets, and somehow STILL leaves a small gap size between them where some tablets fall between the cracks, is kinda... baffling. You would think the attachments would pick up where the other size drops off, but no. Gap. The small attachment fits 6.6-8.0"... my tablet, its smallest width is 6.5, so the small attachment is too big at the narrowest point, and is nearly 10" long, 2 inches wider than the smallest attachment allows. The large attachment fits 7.7-9.6 - too big for the narrow side of my tablet, and too small for the longest. As someone with a disability, who uses a wheelchair, and also Deaf, all of my communications (emails, calls ALL via video interpreter), and need my hands free and devices at very specific angles at a moment's notice. The tri-fold stands don't hold my tablet up in my lap in portrait mode. I've tried so many cases and stands, each with their own pros and cons, but mostly break down and fall apart after a few months of continuous, rigorous use. Two products which fit well and worked perfect for my needs broke within a couple months. I need something that stays attached to my device - not a pillow or lap desk, or any other added "furniture" or things that are bulky and cumbersome, or add weight. I had this holder for all of ten minutes before knowing it wouldn't fit what I need. Currently still repairing and gluing my old attachments while I try to find an alternative. Still looking, though!

I love this for being able to take on and off. It works great when in use. But God forbid you drop it or bump it in any way. It breaks if you look at it the wrong way. I’ve bought it twice and they’ve both broken. The second one I broke I was able to “fix” the tab with some Lexel and that worked until the next time I dropped it and broke off a different tab. I “dropped” it from about 18” in height. The other thing is that it comes in pairs and you can’t just buy the one that fits so now I have 2 grips that don’t fit anything I own and 0 that do. I’m moving on from this and will not be buying again

Context: I’ve worked in IT for 20 years. I love computers since I was 8 years old. I’ve had them all, commodore, Atari, IBM PC, hp, acer, Linux desktops, Linux servers, Windows Servers, Lenovo, Apple Mac… and the best personal computer ever created, for me, is the iPad Pro. So, around 6 years ago I discovered that the best way to use my iPad Pro is to attach it to a keyboard like the Magic Keyboard for work, and for everything else, to hold it with one hand using —something—. My best trick was to use a kickstand that I clunked into making it magnetic, so it attached to the back of my iPad and allowed me to use it with one hand holding it securely and comfortably. It was awesome but looked horrible. A clunker. Plus, it didn’t protect the bottom edge of my iPad when on a table leaning on the kickstand. Then after a lot of search I found this thingy. Very well manufactured, good plastics, but above all VERY WELL DESIGNED. I’m an inventor myself and I know that a lot of design and iterations went into this gadget. It fits perfectly my iPad Pro M4 13”. It is great as a kickstand an as a one hand holder. I’m in awe.

good for about 2 mos then hinge gets too loose, flops out of postion. very frustrating. i will not buy again.

I have been searching for a handheld holder for my ipad12.9 for a long time. And finally got my hands on this particular product. I'm so happy for it and is a must for artists in general, sturdy quality , good finish, The only con I could find is that the apple pencil can't be mounted on it while the holder is used.

its the only thing that worked with the galaxy tab s9 ultra, and its so much more convenient to use on hand rather than a case, given the size of the tablet. Its easy to watch youtube, netflix, draw, do anything one handed. You can also put it as a horizontal stand or vertical stand to watch from afar and it works great. I bought it in January and just had to come back 1month later to give this review. Theres one smaller and one bigger case that comes in the box, i use the bigger one. My sister has the galaxy tab s8 and uses the smaller one just fine.

Bien qualité prix

this holder was hard to find. I love it.

Will only fit the iPad mini while covering the volume keys. Otherwise; good.