Double Sided Tape Heavy Duty, Adhesive Mounting Tape Waterproof, 16.4 FT x 0.94 IN, Strong Foam Tape for Walls, Automotive, Home Office Decor, Made of 3M VHB Tape (Pack of 1)

I’m currently renting, so drilling holes into my walls or tile is a big no-go. I’ve tried generic mounting strips before, only to find my decor on the floor the next morning. Switching to this 3M Heavy Duty Double-Sided Tape has finally given me the "set it and forget it" confidence I was looking for. The Performance Breakdown: • Instant Tack: The adhesive is incredibly aggressive. Once it touches a surface, it’s there to stay. I used it to mount a heavy power strip to the underside of my desk and a spice rack to my kitchen tile—both haven't budged an inch in over a month. • Weather Resistance: I used a small strip to secure a doorbell camera to my outdoor brick siding. Despite a week of heavy rain and fluctuating temperatures, the bond is still rock solid. The acrylic foam core seems to absorb vibrations and handle thermal expansion much better than thin tapes. • Thickness: It has a slight "squish" to it, which is actually a benefit. It helps the tape conform to slightly uneven surfaces, ensuring 100% contact even if your wall isn't perfectly flat. Installation Tips (Crucial for a permanent bond): • Surface Prep: Do not skip the rubbing alcohol. Any hint of dust or finger oil will compromise the bond. Wipe both surfaces down and let them dry completely. • The "Wait" Period: While it's tacky immediately, it reaches full strength after about 24 hours. If you're hanging something heavy, I recommend tape-only for a day before adding the weight of the object. • Removal: This is permanent tape. If you ever need to take it off, you'll likely need a heat gun or some dental floss to "saw" through the foam core, followed by an adhesive remover. Bottom Line: If you are tired of things falling off your walls, skip the "removable" strips and go with this. It’s industrial-grade and performs exactly like the 3M VHB series used in construction.

This is a very high quality adhesive. I used it to place some acoustic panels on a concrete wall. The porous surface made it difficult for other adhesives to stick. But this tape has worked great for more than a year. When I had to remove it from the wall it did not rip the paint or left residue. The only issue which I don’t think is a deal breaker is that the red backing is fairly difficult to remove. My recommendation is to place the tape on the item and leave it for a while. Also using some fine tweezers helps because you can grab a corner and quickly rip it off which is better than slowly peeling it in my experience.

Used this to stick my USB hub, steering wheel power brick, and another USB power brick to the side and underside of my desk. Zero issues with it not sticking, everything is rock solid even hanging underneath. Super easy to cut and apply, and it’s holding up great so far. Strong tape.

This tape is seriously tough — it held up a heavy tool rack and some car trim with no problem. It’s waterproof, flexible, and easy to apply. Just a heads-up: the red liner can be tricky to peel, but a knife or tweezers helps. Great all-around tape!

Best double sided tape ever! I use this to fix my magnetic knife holder to glass tiles. I've tried at least 5 other tapes, including the one comes with the knife holder. It falls after a day or two with these tapes. However, with VHB tape, it works after 24 hours of curing and everything is very sturdy. I am very satisfied with the result.

I really love this tape. I use it in industrial type situations all the time for different things and it holds up amazingly well. Recently I created a battery bank for a UPS and taped the batteries into a set so I could slide them in. It gets hot in that UPS regularly sitting at over 100 degrees Fahrenheit for years at a time, and this tape doesn't miss a beat. The set of batteries I pulled out from 2 years ago also had this tape on them and they were stuck together like new. No issues. I have even used these to tape down solar panels to the roof of one of my trailers and they haven't moved an inch. Here are some pro-tips to get this to stick to its highest potential: 1. Prep. Yes, we all know it's a time vampire, but if you prep the surface correctly, it WILL stick like you won't believe. Not only should you clean the surface with soap and water and get all the gunk off, the real trick is right before you apply the tape, shoot it down with some denatured alcohol. Give the alcohol a minute or two to dry and stick this tape on. The alcohol removes all the contaminants from the surface and gives you pristine sticking power. The difference it makes is amazing. 2. Cut an extra length to hang off each side because you're going to get fingerprints/oils/dirt on the very end of the tape. It's just a reality and what you do is leave yourself a half inch or so on each side and then trim it back with a razor blade when done and you'll keep that perfect bond. 3. When trying to start pulling off the strip on the second side, use the edge of a razor blade or exacto knife or something to get underneath and lift (Don't pry... lift) and you'll be able to get it off without munging the end. If you followed step 2, you'll cut off the end where you might have made little marks with the razor blade anyway, and everything will be nice and clean and stick for a long time, in all kinds of adverse conditions. 4. For the super paranoid, if you're using in particularly harsh or outdoor environments, run a bead of silicon over the mating surface edge after you've given this stuff time to set and you'll find that no water can intrude (even though it says waterproof, what no proof it some more?) and it will hang on to the surface for a very long time, even under reasonable load. This is some of best stuff you can buy, I use it any time I have a "Must hold" situation. I hope you found this helpful

They warrant this product for 24 months for good reason. I had several projects, so I bought this big roll. After 2 years, the red protective tape became impossible to remove. You have to destroy the underlying double adhesive tape in order to get the red tape off. The product performed as stated, but I only ended up using about 10% of the roll, wasting 90% of the $19 cost. I expected better from 3M. Buy a smaller roll, if you can find it.

جيد

Tape adhesion is just amazing. It worked wonders for me when fitting a large 200 watt solar panel on a RV roof top. This tape is a guarantee buy.

استخدمتها للصق اللوحات الطويلة في سيارتي وهي ممتازه جداً وقويه

If you're reading this, rest assured: I've used the product thoroughly for over a year, and what you're getting is an honest, experience-based review. I no longer post product reviews after just a few uses. In the past, I’ve given glowing reviews too soon—only to be disappointed later by unexpected issues like premature wear, tears, or malfunctions. Now, I wait at least 3 to 6 months of regular use before sharing my thoughts. Now let’s talk about this product. This Double-Sided Tape Heavy Duty from Adhesive Mou is absolutely fantastic! The stickiness is incredibly strong, holding firmly to a wide range of surfaces without any issues. I've used this to hold in place my brackets that hold my solar panel on the roof of my cargo trailer. No screws or bolts. Driving at 100 km /hr or 60 miles /hr and having no issues with them unsticking, it stayed put through thick and thin. The tape itself feels thick and durable — definitely built to last. What really impressed me is how clean and easy it was to apply. No messy residue or bubbling, just a smooth, reliable bond every time. For heavy-duty projects, repairs, or mounting, this tape is a total game-changer. It saved me so much time and hassle compared to nails or screws. If you need a tape that delivers on strength, reliability, and ease of use, this Adhesive Mou double-sided tape is a must-have. Highly recommend!

مازال جيد حتى الآن للداش كام