3DLAC 3D Printing 3D Printer Adhesive for Adhesion to Heated Print Bed, Spray, 400 ml 13.52 fl oz

Absolutely love this product. My brother runs a 3d print shop and recommended this to me when I got mine. I was so sick of scrubbing glue off of plates that this product feels like a lifesaver. It works extraordinarily well, keeping pieces secure on the plate with no warping. Very easy release, and it leaves the bottoms of the piece looking perfectly clean. I've been spraying it about every three prints. but I'm sure it could go longer without issues. I've only used it with PLA so far. I believe that it is worth the price, although I haven't determined how long it lasts yet. I also think it smells really good. My only nitpick is that the nozzle could use a little more control.

This stuff is great, better than nano polymer adhesive and cheaper too, though I would recommend waiting for this to go on sale if you can. Unlike what some have claimed this isn't just relabeled hairspray, It has better adhesion than hairspray, and unlike hairspray it doesn't degrade even at 120C bed temps. This is the first adhesive that I've tried that works well on bare steel, so no more destroying buildtak/pei/glass beds with prints that stick too well to the build surface. It does need some help with larger ABS and PC prints, I use ABS slurry in addition to this adhesive which entirely prevents warping at the cost of ease of removal. If you're just printing PLA parts, they hold well, come right off when the bed cools and the adhesive lasts for quite a few prints before needing to be reapplied. I haven't used it much PETG, frankly I find it more annoying to print than ABS, but the two prints I have done with PETG have stuck well and released easily when the bed cooled.

literally the best adhesion spray ever. easy to clean off, no smell. prints come out immaculate every single time!

This stuff is actually amazing. I thought I was just terrible at 3d printing. It was so hard to get things to finish. I would tweak the setting on everything. Bed temp hi, low different filaments but never tried another glue since I thought they were all the same, whoops. Since this stuff was delivered I have printed endlessly and haven't had a single break from the plate. I love the spray instead of the roll on. The spray amount is perfect and covers the plate with one swoop. It just works. My 3d printer has come alive again and my son is really stoked.

i'd heard a lot of good things about 3dlac & have been getting frustrated with the fabric applicator on my magigoo hardening & shredding on my build plate anyway, so i figured i'd give it a shot - not like i don't have plenty of build plates to choose from & could switch back to magigoo at any time, but that definitely isn't necessary. application is simple, just spray it on as evenly as you can without going overboard & let it dry, which only takes a few minutes. i print mostly abs & haven't had the slightest adhesion problem since the first use & no longer have to worry about an applicator getting crunchy or torn up. release upon cool down is exactly how we all want - either the part pops itself off the build plate as it cools or pop it off yourself once the build plate is cool enough to handle. no muss, no fuss, solid adhesion, easy releases. i wish i'd gotten this instead of magigoo initially, honestly. the only thing i recommend is spraying your build plates outside, in the event of any potential fumes - i don't know if there are any, but caution is usually a good idea.

Definitely has a smell to it but it works great, and none of the artifacts in the prints you can sometimes get from thicker glues. A little bit goes along way on smooth PEI plates.

This spray works absolutely fantastic on a glass bed! I print with ASA a lot and you can;t use the regular bed because of the high temperature which makes it warp. I tried the glue stick on glass. Does not work at all for me. I also tried a number of other adhesives and they all failed. But this stuff works perfectly. Holds the print in place and lets go when it cools off. You have to try this product if you have adhesion problems. Totally worth it.

So I stopped 3d printing about 3 years ago, recently I got rid of my printers and got some new flashforges. After a while and a ton of prints, I started to use the flashforge adhesive and it was terrible, nothing would stick, it always left some type of film was left like oilish. So today as of about 2 hours ago I found my old can of 3DLAC from 2022 that I bought from here on Amazon and decided to give my 3 year old spray a try and let me tell you it still works flawlessly, I don't even know why I didn't try finding it in the first place, now prints are coming out very nice all thanks to the little adhesion I needed from 3 YEAR OLD SPRAY THAT WAS HALF USED and still worked!!! Love this stuff and just bought 2 more cans.

Forse anche troppo forte!

Ich hab den 3DLAC Sprühkleber (400 ml) über mehrere Druckjobs hinweg im Einsatz gehabt, und wenn es um eines der stillen, aber entscheidenden Helferlein im 3D-Druck geht, dann fällt dieses Produkt ganz klar in die Kategorie „macht, was es soll und zwar zuverlässig“. Was ich sofort mag: Die Handhabung ist einfach und vorhersehbar. Leichtes Aufsprühen, kurz trocknen lassen, und das Filament haftet sehr gut – gerade bei PLA oder PETG spürt man den Unterschied, wenn die erste Schicht sauber und plan am Bett sitzt. Kein lästiges Nachjustieren der Druckbetttemperatur, kein „Ränder heben sich, Mitte bleibt kleben“-Drama mehr. Gerade bei großen oder flachen Drucken ist das ein echter Komfortgewinn. Der Sprühnebel verteilt sich fein, ohne gleich eine nasse Pfütze zu hinterlassen. Das sorgt für gleichmäßige Auflagefläche, ohne dass man hinterher Stunden mit Reinigen oder Abkratzen verbringt. Und falls doch mal zuviel drauf ist: Mit etwas Wasser oder einem feuchten Tuch lässt sich das nach dem Druck recht einfach entfernen. Die 400 ml-Dose reicht erstaunlich lang – ich drucke regelmäßig und habe bei weitem noch nicht die Hälfte verbraucht. Das ist angenehm, weil man sofort merkt: So ein Helfer wird nicht zur Einwegware, sondern bleibt länger im Werkzeugkasten. Fazit: Ein solider Sprühkleber für bessere Haftung auf dem Druckbett, der zuverlässig und ohne großes Gefrickel funktioniert. Besonders bei anspruchsvolleren Drucken oder wenn du öfter mit Materialen arbeitest, die nicht von allein anbetten wollen, kann 3DLAC wirklich den Unterschied machen zwischen „läuft sauber“ und „Stop-Spiel“. Im 3D-Druck zählt die erste Schicht oft mehr als alles andere – und dieser Sprühkleber sorgt, dass sie nicht zur nervigen Hürde wird.

Guter Preis, schnelle Lieferung und machen ihren Job. Haftung hervorragend

3DLac, que decir de esta laca para evitar warping en la impresión 3d, y tener primeras capas bien hechas. Yo que tengo bandeja PEI Texturizada ya que dice en una esquina que use pegamento. Y con uno en spray, gastas poco, dura mucho, y tiene muy buenos resultados. Y si te lo venden en packs baraatos, BBB

Tutto ok