Sponsored Ad - 24 Inch Hardwired Under Cabinet Lights, 2 Colors - 3000K (Soft White) & 4000K (Cool White), Led Under Cabinet Lighting Hardwired, Dimmable Under Counter Lights for Kitchen, Under counter Light Fixture

Awesome light. Better cost than I could find at Home Depot. Easily change brightness with a flip of the switch.Quality light , I highly recommend.

Lights were ready to hang and I love to be able to change from 3000 to 4000 depending upon my needs.

Good lightPlenty of wire for easy hook upLiked the soft color optionSmall problem the plastic cover that protect the leds and provides access takes a tremendous effort to push away from three retaining tabs. Needed two hands to push back and another person to slides a thin screw driver under to aid release. After install I never slide the plastic under the middle tab because I thought I might break the plastic. Lastly the supplied wire nuts are tiny. You'll undoubtedly need larger ones.

This is a good light is and it is really bright.

The media could not be loaded. Beautiful. The color can be changed and I’m very pleased

Got these for a new house that has a large kitchen and poor lighting. They were a little bit of a pain to install under the cabinets, but once done, I was very pleased with the amount of light to my counters. I also love the "color" selection. I can make them match the hood light for symmetry. I personally like them without the lenses on.

1. The light works BUT!2. The lens cover is very difficult to remove and to reinstall.3. The metal cover that exposes the wires is also difficult to remove and even harder to reinstall.4. The wire nuts are for very small wires. Not adequate for Romex wire.5. If you are replacing a fixture that has been professionally hardwired, you should use your existing cable connector and wire nuts. Do not mess with the cheap parts that came in the package.6. The metal housing is very shallow in depth. It does not allow for adequate space for all the wiring.7. You will be able to fit all the wires in, but it is frustrating and it takes more time than necessary.8. The rivets that hold the LED's in place are very cheap. One of the rivets popped loose during installation.9. The light works and is very bright with 2 different color temperature levels. Warm white and cool white.10. Bottom Line:The light works and is very nice. The cheap and skimpy material make an easy installation frustrating and difficult. Time will tell if the light works for the promised 50,000 hours. It does come with a 5 year warranty according to the Amazon website.

This is a very nice replacement for a 12" fluorescent. It was remarkably easy to install AFTER figuring out the disassembly instructions. Nice that they give you an instruction to take out a knockout (as if), but really don't explain how to get to the guts very well. So, here I go: Instruction #2 (after removing the lens) says, "Disassemble metal cover by squeezing the cover till it releases from the tabs and then pull up." Well, what tabs? I'll tell you: There are very small tabs on the front portion of the bottom side of the base that hold the LED assembly and top cover to the base. See photo attached.When it says "squeez[e]", you have to wonder if you are going to squeeze the LEDs into oblivion. And, that's only after you know where the tabs are (which you now do). I didn't feel comfortable "squeezing" the LED assembly, so I used a flat head screwdriver to push the top cover away from the tabs on the base. When I figured out what to do (on my first of 2 fixtures, the second one took 10 minutes to install).UPDATE: WATCH THE VIDEO to see where the tabs are located. (Stupidly, I didn't)The fixture has two different light frequency settings, 2000K and 3000K with a rocker switch to change right on the cover, opposite the on/off switch.I found the LED to be slightly brighter than the 8W 12" fluorescent that it replaced. Pretty close, though