Epson EcoTank ET-2720 Wireless Color All-in-One Supertank Printer with Scanner and Copier - White

Worth every dollar. Good Image printing quality, amazing ink capacity, durable, easy connectivity.

This printer seems to be working very well.

I bought this Epson for home and then had my boss buy it for me at work because I liked it. At work I print about 25 pages a day, give or take. It took 13 months before I had to refill my black ink. It NEVER DRIES OUT! I cannot say enough about how much I love this printer. At home, we all print from our phones and computers on the first try, every time. When I finally had to refill my black ink at work it cost $13.88. That's it. Life changer. There are probably newer models now because this is from 2021 (not even close to needing to refill my ink at home yet!) The printer was expensive, $300-ish but so worth it.My only complaint is the way the paper loads. I would have preferred a drawer so it can sit closer to a wall in the back. However, changing paper types (plain, card stock, 4x6 photo, etc) is way easy with the back feed. You do have to tell it you switched paper sizes on the machine before you can just switch from an 8.5x11 vs 4x6 or what type of paper you're using. It does get mad about that sometimes.Scanner function I don't use/haven't figured out yet. Copier works perfect.Home I use wifi, work I'm plugged directly into it. Easy-peasy both ways.Doesn't do double sided printing.Color ink level barely moves but I use it quite a bit. It just lasts forever.My mom bought one too since I told her it was great. She complains the screen is too small for her to read without her glasses on.Overall - absolutely a great investment. The ink is always ready when you need to print! Even if months go by between printing.

The media could not be loaded. Irrelevant Backstory:Before I bought this printer I owned two printers; A hp and a cheap canon. The canon ink was as much as the printer and nothing is wrong with the hp, I just wanted a cute white one to go in my office. Upon searching I came across his cartridge free printer which I didn’t even know was an option. The reviews were great and it seems this printer is more green than the usual option so I decided to give it a shot.Unboxing and Setup:Super simple to set up; just follow the instructions.-Take off all the protective tape.-Load the printer with ink then turn the printer on-let the ink run into the printer which takes about 10 minutes-It says you can adjust later but you want to ADJUST NOW otherwise your prints will have lines in them.During the adjustment it will print three papers the first paper is just text, the second paper it prints a multiple lines of squares and you go through and you choose the square with the least amount of lines in them. This step ensures that your prints don’t have lines. The third print it prints multiple sets of parallel rectangles and you have to choose a set of rectangles that do not overlap or have separation between them. It was hard to selected the set since they are black rectangles but I just chose the set right before the set where I could see separation.Next, I connected the printer to my WiFi using the control panel; this was easy. I was able to select the epson printer from my phone after and it printed without flaws and fast.The printer does have a quiet setting and I turned it on. The printer is a bit quieter but of course not silent.Afterwards, I filled the printer up with the rest of the ink. The levels go down after running through the printer and there is a small amount left in each bottle after initial fill. I didn’t adjust again after and it still printed flawlessly.Overall I am very satisfied from this printer but only time will tell.PROS:Ease of setupLong periods of time in between ink replacements (I assume)Size (smaller than I thought)Look (pretty)Fast printsFlawless printingThe control panel swivelsThe screen has a backlightCONS:(More like a wish list because I knew the printer was this way was when I bought it.)-Top loading (need more space for the printer because it is top loading; wish it was bottom loading)-does not print double sided by itself (you have to manually flip and print)

I bought my Epson ET2803 in November 2022 for my upcoming art business. Hardly used it to start, but it worked fine when I did. Last month I started to print all of my expense receipts for my binder and it gave me a combination of the W-01 and E-01 error codes for paper jams. Sometimes it would actually have jammed paper. Other times there was nothing jammed, and it would just spit the paper completely out just fine and THEN say it had a paper jam. After spending an entire day trying to figure it out on my own, and watching YouTube videos on how to fix this, I called Epson. After an hour on the phone with them, they tell me they can't help me because I bought it from a third-party seller and to contact them. I'm glad I paid for a protection plan through Asurion, so I called them. They tried to troubleshoot it over the phone with me, but I still kept getting the same errors. So, they file my claim, tell me they can override my manufacturer's warranty and send me a shipping label and I ship it to them on 6/23. They received it on 6/30 and "fixed it" and shipped it back to me the same day and I received it on 7/7. (So, two weeks total. I get it back last Friday, unbox it and go to make a copy of something simple in the scanner. Same friggin error message!!! And the paper got stuck, then finished printing but you could tell the ink is all messed up because there are a bunch of lines. So, I follow the onscreen instructions AGAIN and I turn it off. I spend an hour doing all of this all over again: I tried cleaning the nozzles like it said, cleaning the print heads, opened it numerous times like it said and of course no paper stuck inside, and I still get the paper jam error and it always wants me to turn it off and back on again. So, I just called Asurion again, filed another claim and I have to ship it back to them AGAIN. They said they will try fixing it again, even though their paperwork shows it was working fine and passed inspection. The guy I spoke to, Arvin, said that if the error happens again to call back and they will see what they can do about reimbursement/refund or replacement product because it will be the third time. At this rate, I'm half tempted to just buy a new printer, but from canon this time. I researched the Epson heavily to make sure it was what I wanted for my art business, and I never saw anything review wise about this. This is ridiculous. Be careful, and honestly it may be better to actually buy from Epson.com or an office supply store. Because if you buy on amazon and not directly from the amazon EPSON store, if you call Epson they will tell you they can't help you.