Junction Box, Zulkit Project Box IP65 Waterproof Outdoor Box ABS Plastic Electrical Boxes Electronic Enclosure Black 3.94 x 2.68 x 1.97 inch (100X68X50mm) (Pack of 2)

Dimensions and specifications are accurate. Worked great for my application. Fast delivery too.

I bought this to house a time delay relay to switch on an external hard drive 10 seconds after the computer is turned on. Solid case with a cover gasket. Very reasonable price.

Nice little hobby boxes for the price. Shiny finish, they drill fine, and have good fit and finish. Used to add a couple switches to the tractor using an existing bolt so as not to make holes in the dash. Would buy again

Nice project box, but the rubber gasket cord is a pain and takes some time to push into the cover. I'll probably get a box with the gasket already attached next time. Otherwise, it is durable, and once you get the gasket in the lid, it should be fairly water tight. The lid screws have metal inserts to screw in to, so can pull the lid down good and shouldn't strip out. The box itself is fairly thick plastic, so should be very durable.

I really like these project boxes. Their durable, easy to drill, and lots of size choices. I also like the metal threads and machine screws instead of self-tapping screws into plastic. Lots of room inside with no partitions getting in the way. I'll be ordering more of these in the future.

Heavy duty box. Works as described.

Bought this little box to use on a boat. Comes with a gasket and seems like it keeps the water out pretty good. Out of precaution I did drill a 1/8” weep hole in the bottom just in case any moisture gets in.

Enclosure purchased: "4.5 x 3.5 x 2.2 inch" I typically make my own enclosures but I wanted to buy one this time. This enclosure is nice, the finish is a mild/moderate gloss, it ~seems~ well-waterproofed (my application won't be submerged), and it came with multiple standoffs built-in. The enclosure I bought (here in January 2023) had 6 standoffs. One in each of the 4 corners, and one centered between two on either short end. I just cut off the middle standoff on one end for my use. The schematic for this enclosure appears to be accurate in measurements (aside from standoffs not matching the photos, but I didn't expect standoffs to match my circuitry in this one anyway). My circuitry didn't match the standoff pattern so I made my own. The enclosure top and bottom thickness is 3.8mm and I was able to drill+"tap" holes for some motherboard standoffs, without drilling through the bottom of the enclosure which I was happy about. I used a drop of JB Weld on each to be sure. I appreciate the thicker bottom and top. My only wish would be covers for the screw heads on the enclosure's top. The bright shiny metal messes with the color flow. But paint or even a Sharpie should help, it's not even worth listing as a con. I'm just getting started with this enclosure but it seems like it'll be exactly what I was looking for.

This project box is credible, however, it has standoffs in the bottom, two of which have threaded female brass inserts to accept machine screws. These are intended for use with a mounting plate so project builders can build components onto the plate outside of the box in the open and then simply screw the base down inside the box when they are done. If the vendor is not going to include the plate, they should at least offer it separately. In my case, I work with plastics and easily made a mounting plate of my own. I made all the cut outs in the box using a rotary cutter (rotozip) and found the ABS body to be much tougher than I expected. Zero issues with cracking despite some of the big holes I put in the box. Everything you see in the photo and video was purchased on Amazon including the ASPL lights, the Talentcell rechargeable battery, the power distribution and accessory unit, even the cable glands. All excellent Amazon products leading to an outstanding outcome. My Rize bicycle has never been the same. When cars approach my bike at night from the rear on lonely country roads they slow right down because they don't even realize it is an electric bicycle. The ASPL (Amazon) strobe emergency lights are so bright they even flash off the trees on both sides of the road.

Le quite una estrella porque están muy caras, pero la calidad esta buena.

Stainless screws in brass bushes, sealing strip easy to fit after carefully trimming to length. Robust plastic, suitable for use outdoors. Quite tricky to cut as it melts very easily; don't use an electric saw. Must be drilled slowly, too. Mine houses electronics on a motor-boat.

perfect for my motor control boxes

Too small for what I needed but it’s a solid box for your project.