Solution Finish - Black Plastic & Vinyl Trim Restorer - Use for Car and Truck Detailing, No Wet Look, Instantly Revives Color to Trim, Bumpers, Mud Flaps, Etc., Black (1 oz)

I have a 1999 Tacoma that I love—some of the plastic parts have faded over time, but this product did a great job and restoring the plastic! If there’s scrapes or imperfections in the plastic, obviously they will still be there after the application, but it also does help to minimize the appearance of them. Cleaned the parts with rubbing alcohol, applied with a microfiber cloth, then buffed with a clean microfiber cloth. I’m happy how it turned out!EDIT: Two months later, and product is still holding up! Very pleased with it still

After a lot of searching for a trim restorer that will actually last more than a couple weeks I finally chose solution finish! This stuff has a much more “professional” quality to it. It’s fairly simple to apply and it works immediately! 3 weeks later and it looks just as good as it did on day 1!If your trim is really faded then I’d recommend 2 applications spaced out about a day apart to give the first coat time to set fully. Stuff works so well that after showing it to my dad he asked me to send him the link so he could buy a bottle himself lol. Also good to know is that the 1 oz bottle will seem pretty small but it’s more than enough to do atleast a few applications on an average suv.

This is a great product. It definitely does what it should, but I do have to reapply it constantly and it's expensive! It can last, but I love the shiny finish it initially has in the first few weeks.

Ordered this to refresh the trim on my 2012 Subaru Outback which has been spending all of it's time in the elements instead of the garage, which had caused significant fading and striping of the exterior plastic trim. I ran by a youtube review of this product and despite a relatively high price, thought I would give it a go.The first order arrived and the package was empty, I talked to Amazon who refunded my purchase and then I ordered it again. In the meantime, I had two emails from the company apologizing and wanting to make sure everything was OK with the second order. Over the weekend, I washed and then used isopropyl alcohol to remove any residue. The trim turned out fantastic, as good as they day it arrived from the dealer. A couple thoughts...1. A little goes a long way, I applied with a micro-fiber cloth (which I tossed when done).2. Wear gloves, this will stain your hands.3. Let it sit for a few minutes then lightly wipe it down (this worked for me to get an even application).4. Let it dry before taking it out or getting it wet. Over-night was long enough for me.

Seldom do we find any product that is quite as good as we've hoped. This blackening fluid caused me to stop a stranger on the street as I was applying it and tell him how amazed I was. The directions say to wipe off the excess just after applying it. In my testing phase, I thought maybe leaving it on over night might let it penetrate or somehow improve results. I was wrong because it gets a bit sticky and makes work that is avoided by following directions. And perhaps because I had waxed my paint (not the black plastic, of course), I found that I could quickly smear the fluid onto the black parts, not worrying about over-smear because all of the excess wipes right off easily, leaving the black with a nice dark charcoal sheen. And the harder plastics (mirrors) became gloss black. Nice! The small bottle did the whole job including a rear bumper and luggage racks. Though I started with gloves, they leaked, so before I was finished, I had a lot on my hands, but kerosene took it right off except around my fingernails, so maybe I'll paint my nails black and nobody will notice except my agriculture friends.

The directions say to apply the product and then wipe off the oil residue, but doesn't say at what point you do that. Wait till it dries? Do it right away? After a minute? Since kind of hard to tell if it's wet or if it's "oil", as they call it, you will end up experimenting. Tip: Do it right away or you'll be sorry, you'll be rubbing and rubbing and rubbing. I couldn't get some off so used a tiny bit of WD-40 and that wiped off the residue super quick, didn't seem to take off anything else. who knows what that's going to do long-term, but it's almost impossible to rub out if it dries.

I found this product after researching products that treat faded plastic and vinyl on automobiles. It was one comment on a forum that help me track down Solution. I tried it on my 2010 Jeep Grand Cherokee. I was amazed on how it bought my roof rack back to life. Now they look brand new. I was able to treat two of my vehicles with one bottle. One ounce doesn’t seem like a lot, but it was plenty.

Ok. First off I write honest reviews, and usually give 5 star reviews if it works. #1 good shipping time.#2 mine came in a white bottle."don’t know if that matters ?" #3 this is a dye, that being said i used this using their "professional" instructions to a T. Will this work on hard black faded plastics? Probably. Will this work on polypropylene or rubberized plastics? Absoblutely not. Am I mad. No. But i do speak the truth..Yes sorry. Do I feel like a full refund? Yes. I felt mislead. When applying solution it looked fantastic. When completing final wipe down, all was lost. Applied 3 different coats letting each one sit longer before final wipe to no change. Sorry I feel like tirewet does better until it rains. Solution looks great until wiped off. If you let it sit , remember i said it was dye.Clothes, skin,=Ruined if bumped up against. I feel like a full refund should be in order for me.Product arrived earlier today. Again im not a hater but honest. Maybe it works for others but ive seen no result on faded rubber or polypropylene. Was basically trying to make a piece from 2016 look new again. Fail. No money back.No problem,it was 12 bucks,I really just wanted this product to work ! Thats all

I bought Solution Finish – Black Plastic & Vinyl Restorer (1 oz.) after a friend recommended it, and I’m very impressed.It restores faded black plastic and vinyl, bringing back a deep, rich colour without leaving a greasy finish. I used it on exterior car trim that had turned grey, and the results were immediate.A little goes a long way, and it looks long-lasting. Very happy with this product.

Buono

La photo pourrait laisser penser que les gants et le chiffon microfibre sont dans le colis ,Eh ben que nenni. Juste la petite fiole de livrée en France 🇫🇷. Produit non testé car reçu ce jour. Je rectifierai la note après application sur le véhicule. À suivre….

Excellent

Good!!