rabbitgoo Window Film Privacy Frosted Window Film Opaque Stickers for Glass Doors Frosting with New Grid Design No Glue Anti UV Self Adhesive Sun Block Home Bathroom Office 44.5 x 200 cm

Excellent quality, brilliant and easy to apply. For the money you can’t go wrong. I’ve also brought other patterned ones they do and they’re equally as good and easy to fit!! Attached a pic of the pattern one I applied. Would really recommend to others if you still want good light in the room but with complete privacy for a very good price. I applied this with some warm slightly soapy water and gently scraped it with a credit card wrapped in a napkin! So easy & such a good look. It looks far more professional than I thought & if you do it wrong it’s not super expensive so you can buy more but I ordered enough to do it twice if needed. It’s so easy to do and I’m no expert at these things so if you want to try it, give it a go. I done it alone but I’d imagine a helping hand to hold it would be even easier.

Being a former signmaker, I was expecting this to be a doddle to install, but it needs the patience of a saint. First of all make sure that you have a very sharp blade and straight edge to hand, like a new scalpel and long metal ruler. Also make sure that you use a proper felt-edged squeegee as anything else can damage the film easily. Use a fine spray bottle of water with 1-2 drops of cheap washing up liquid. Starting to get the backing film off is difficult so you may need to trim off the bit where your fingers may have touched the adhesion side (branded film is more forgiving). Spray the window thoroughly, apply the film from the top and squeegee down carefully. I'll be using 3M or Metamark Crystal Etch next time as the backing paper and application is so much easier to work with. However, it dried out perfectly, is still stuck, does the job and is OK for the money.

Such good stuff, really easy to apply and lasted ages. Instant privacy for our living room which was only a meter from a public footpath out front. From outside you can see blurry shapes but nothing defined at all.

Perfect - does the job However, it took me ages to peel it off No glue which is brilliant

Easy to put up but after a few days it’s coming off at the bottom and top corners. Could be because it’s a very sunny window. Good for privacy and nice quality, very thick.

Don't bother with it. Spent ages cutting it for my Georgian windows and it doesn't work. I've just taken it all off and I'm now using a spray it's much much better and saves alot of time .

Really easy to install - followed the instructions to the letter. I have an awkward window in my living room - it’s L shaped and the shorter side looks directly into my porch - which has lots of coats and shoes and school bags etc as a family of 6. I didn’t like looking into the porch as despite lots of storage inevitably I have 3 school age children who don’t utilise said storage and dump stuff where they take it off. Also, people could see straight into the living room from the front windows of the porch, so I wanted some additional privacy without blocking the light it provides. I read previous reviews, and knew taking off the back may be an issue, but I personally didn’t experience this with the sticky tab provided and having nails :) I thoroughly degreased and cleaned the window - used a special blade tool to remove any specs of paint from previous occupants lack of care while painting. I measured my window pane and removed 1 centimeter to leave a 0.5cm clearance around each end. The material was easy to cut thanks to the grid. I had a spray bottle of approximately 350ml and added cold water and 1 solitary drop of washing up liquid. I thoroughly soaked the window and the sheet once back removed and placed. It was easily to remove and replace until I got 0.5cm evenly spaced all around the edges. Then, working from the centre outwards, I used an old library card with clean dry kitchen role on the longest edge (to avoid any damage) to squidgee out all the liquid and air bubbles - frequently replacing the kitchen roll, which helped to absorbs the excess water at the edges. Result was perfect placement, no air bubbles or creases. I only fitted today, so will be interesting to see how it holds up, but so far so good - can’t see any porch detritus from the kids and privacy achieved from anyone at the front door. It was a very cost effective item to achieve the desired results and appears to be well adhered. As a bonus, this particular window pane is a single sheet of glass, so I feel that the adhesive sheet will also provide a small safety aspect, should anything end up through the window (though it hasn’t in 6 years and don’t suppose it will, but I feel better for it being there and may do the other side so it creates a sandwich effect for the pane of glass. Really pleased, and looks great 😌

this product is great. cuts down sunlight, heat. Insulates in cold. Larger pieces are finicky to cut and place without imperfections. Use a firm squeegee and keep all surfaces really wet while applying. Use sticky tape provided to take off backing or you'll struggle.

I had my doubts but for the price it was worth a try. We had ugly glass in a cabinet. This fixed it up. Perfect. Easy install

I live in an apartment complex and needed privacy without darkening my home. This gives exactly that! I’m pleased to find that my plants are completely unbothered. Application was relatively simple. I recommend you get a squeegee and use A LOT of water for application—the first one I applied was tough because I didn’t use enough water but after I got the hang of it, it was very simple. I cleaned the window with windex then wiped it off with a paper towel that had isopropyl alcohol on it just to be extra safe. after weeks, it’s still clinging perfectly and not coming up at the corners at all. because there is no sticky residue and it’s just clinging, it’s a good product for apartment living because it comes right off clean like a window cling when you’re done with it. really great product

Unable to peel off film. Do not buy

The film is easy to install. Make sure to read and follow the directions! Clean the glass surface first. A small wallpaper roller was used to work out the bubbles, making it a quick job. Also, as others have said, use plenty of water as that helps to minimize the amount of bubbles in the first place. Cutting was done with a simple razor blade along with a T square for a straight edge and a rotary cutting mat. Quick and easy. Used a bit of tape to separate the film from the backing; sometimes it took a couple of tries to get it to come apart, but nothing too frustrating. Now the windows are completely darkened--no light in or out.

I used this privacy film for the sun shield on my school bus. Oddly... the sun visor on my school bus was clear plexiglass... so I am not sure exactly what "shielding from the sun" was going to happen.. so I ordered this film. I was able to cut it to size and install it by wetting the mounting surface and then applying the film and using the included tool and my fingers..... smoothed out the air bubbles. The film has been in place for about a month now and has not even hinted it wanted to come off.. which I am impressed by. Especially since it is something I reach up and touch to flip up or down. Now.. I have used this type of film in the past and the number one complaint I see is people have a difficult time removing the backing from the film. And I have to admit, the instructions given to remove it are not always that great. So here is what you do.. At the beginning of the roll, usually in one corner is a clear tab. You have to grab the tab and the backing and slowly and carefully separate it. Once you separate it... here is the really important part... when you have the amount of film you want rolled out... cut the film another few inches longer... leaving about 3 inches MORE of backing than film. so the next time you want to separate it.. you have a nice piece of backing to grab to separate the film. Should you somehow remove, tear, not have.. a tab to get the initial separation of film and backing going... I will rip the end.. so its jagged and messy... usually in that process... a section of backing will get ripped away from the film... and you should be able to start separating it from there. But YES... this film works great and it should work great for you.