V32 68 Viscosity Synthetic Vacuum Pump Oil 32oz 1-Pack

I purchased for my hubby to use on our son's car. The TSI Supercool V32 68 Viscosity Synthetic Vacuum Pump Oil, and I'm very impressed with its performance. It met my hubby's needs for an oil that performs under pressure, and this synthetic formula delivers!

Husband purchased and worked well for the hot tub pump!

This oil is total quality oil for the Vevor chamber vac really good stuff. It did actually help quiet down the noise level of the chamber vac. when in operation. The viscosity of the oil is very thin but that is what my specific chamber vac needs. No leaks if you make sure you tighten the threaded plug on top the chamber vac will not leak. I like to perform a complete flush when I change the oil in my chamber vac I release the bottom plug along with the top plug and drain all the oil I can out. Plus if you have kids it is a good thing to show them you can’t always drop $300 to $400 bucks on an item just because you did not do a little maintenance. I definitely recommend this product for chamber vacs.

Good quality for pump

I ordered the synthetic TSI Supercool Vacuum Pump oil for use in my new single stage rotary vane vacuum pump. I have a small home lab and have been doing some vacuum experiments and vacuum pump oil is a necessity. This TSI Supercool Vacuum Pump oil is specifically formulated for vacuum pump operational needs. It’s a high-quality, crystal-clear, 68 viscosity specialty oil that’s fairly priced for the utility it provides. I just pour it in my vacuum roughing pump per the pumps instructions, prime the pump and I’m good to go. I’ve not experienced any leakage associated with this oil use nor do I expect any issues whatsoever. It just works. For its modest price I think it’ll be hard to beat.

It's oil. It goes in a vacuum pump. Epoxy requires it to be changed out often, so its cheap enought that I don't worry about it.

I was a skeptic that this doesn't smoke or vaporize lile other oils but it really does. Seems to last fairly well doing epoxy and my pump seems to run quieter and a little cooler. Will buy again when I run out.

We make custom soft plastic fishing lures (YATES BAITS) and purchased one of the cheapest vacuum chambers on Amazon because we knew that the pump probably wouldn’t last due to degassing hot plastisol and eventually have to buy several new pumps throughout the lifetime of this business. We bought this oil with the pump merely based on reviews and never used the cheap mineral oil looking stuff that came with the pump. After changing the first break in period to inspect for metal shavings and debris, this pump has been abused for years now (as you can tell from the color from the oil, thats not internal wear but plastisol colorant that has been sucked into the motor and mixed with the oil). No gasket or seal leaks, no damage to the diaphragm.. Nothing. Maybe the tolerances are better now in pumps than what they used to be but I’m still a believer in this oil. Short run cycles throughout the day and it doesn’t get hot or loud, this isn’t a paid testimony.. just wanted to share our experience with this oil and maybe help someone out.

Très bonne elle est de qualité

جميلل جدا المنتج و اخذ شهر للتوصيل لكن يستحق العناء ♥️

Good quality with less air pollution

Good oil and quantity is enough. More than enough for small job but delivery is bad.

Funciona bastante bien