Hicarer Quartz Clock Mechanism Replacement, Shaft Length 0.9 Inch/ 23 mm

Bought this to replace a quartz pendulum movement for a clock I made. Please be sure to check the clearance you have between the clock face and the inside surface of the glass door in front of the clock face compared to the movement (remembering to subtract the thickness of the clock face from the movement length!) This movement does not include a pendulum (which was fine for me - I already have one). The hands provided were a little long for my clock face. If necessary I could have easily trimmed them to length - I ended up using the original hands which fit well on the new movement. The movement does have a second hand function, which I really did not need - there is a brass button that presses into the end of the movement if you don't use the second hand to improve the look. (the brass button in my kit was already installed on the second hand, but comes off readily.) NO chimes or fake "tick" noise, which I did not want anyway. I installed it 3 days ago - took less than 15 minutes - Instructions are adequate - and the clock has been keeping excellent time since than.. Quartz movements are by definition accurate, but its always nice to confirm that its so. Happy with the choice - would definitely recommend it for a replacement of an existing movement if the length of the spindle works for you.

I ordered this to replace an old worn out movement in an antique clock. It took all of 15 minutes to install and really adds a touch of class to the clock. The second hand is a really cool improvement. The old movement didn't have that. It's been running for about 48 hours now and is keeping time perfectly. The hands are well made and look great. If you need a new movement, this is a great option.

I used this to replace the movement and hands of a 24" Ballard Designs clock. It's been in the clock for about 3 weeks and is working very well. It takes one AA battery and I wish it took a C so I wouldn't have to keep an eye on the battery or take the clock down often to replace it. It was easy to install. I ordered a different set of hands, and they fit perfectly on the motor. It's true that the pendulum barely moves.

Item as described fast delivery

I had an old pedulum clock that belonged to me Dad that was no longer working and needed a motor. This clock movement fit perfectly and keeps realy good time, which honestly I was not expecting. Pay attention to the length of the arm, make sure it will work for you. Also, don't do like me, measure your clock face. The hand were too long for mine and I had to reuse the old hands, just barely got them to work.

If you want a pendulum clock, this is not for you. I won't drive the lightest one I could make - a twisted wire - let alone the pendulum from the movement I was replaceing (see photo).

I bought an old pendulum Regulator clock for $11 at an estate sale and absolutely love it! The timing mechanism went bad on it so I ordered this one and replaced it. This one keeps exceptional time and has a second hand that the original did not. So for $20 bucks I still have the antique clock operable that I love! I hope it lasts!

I purchased this set for a Halloween craft. I didn’t need an item that kept accurate time. I only needed an item that had a pendulum. Upon receiving it, I was impressed with the swing of the pendulum bar. I attached the unit to my project and upon finishing it all, I attached a pendulum. It would not swing. At all. No motion. I thought maybe the pendulum was too heavy so I tried a much lighter plastic piece as a pendulum. The pendulum still would not move. I tried an even lighter plastic pendulum. Again, nothing. Finally, I resorted to making a paper pendulum. The pendulum finally moved! However, not like it does without a pendulum. As you can see from the video, the pendulum barely moves. This pendulum is attached to the unit as it should be, however, this is paper! I’ve never seen a clock’s pendulum made so lightweight it was paper! This unit is a joke if you’re looking for a nice pendulum swing!

It was almost easy to install. The minute hand should fit on the shaft nicely but the metal was a bit burred which meant I had to try and get rid of that to fit it. It is fine but then I bent the hand and had to try and make it flat again. It works great. Very happy. Would be five stars but that tiny little mistake that was fixable

conforme

Ottimo

Le mécanisme de mon carillon de 23 ans d'âge, a cessé de fonctionner. Pour un nouveau carillon il fallait compter 250 à 350 € , j'ai tenté l'expérience et c'est une réussite. Très facile à monter et un fonctionnement parfait, j'ai dû ajuster la grande aiguille et la trotteuse, même mon balancier a retrouvé sa place. Formidable, il est reparti pour autant et que pour 13,99€ Merci !!!

Llegó bien, es un sistema muy sencillo, fácil de instalar, y por ahora funciona.