OVERTURE High Speed PLA Filament 1.75mm 3D Printer Filament,1kg White | Neatly Wound 1kg Spool (2.2lbs) Rapid PLA, Dimensional Accuracy +/- 0.02 mm, Fit Most FDM 3D Printers (White)

I’ve run a lot of different PLA brands through my printers, and OVERTURE continues to be one of the most reliable. This PLA feeds smoothly, holds consistent diameter, and doesn’t give me the random clogs or under‑extrusion issues I’ve seen with cheaper spools. Print quality is excellent — layers bond cleanly, edges stay sharp, and I get very little stringing once I dial in temps. The spool is wound evenly, which matters more than people think, and the filament arrives vacuum‑sealed with desiccant so moisture isn’t a problem right out of the box. I’ve used it for functional prints, props, and some larger jobs, and it performs the same across all of them. If you want a filament that just works without babysitting your printer, OVERTURE PLA is a solid choice. I’ll keep buying it.

UPDATE: Amazon does not let me do a separate review for the black PLA, so I am updating this one. I like the black PLA a lot. The surface finish can be a smooth matte black at lower temperatures or glossy at higher. It does have a tendency to warp on smooth steel along with textured PEI, I have to use gluestick and turn the print fan down. But that totally depends on your print surface and other factors, I cannot say for sure if that is a universal issue with Overture Black PLA. Overall I would give the black PLA a 4.5 out of 5 and the white PLA a 4 out of 5. It is some of the better PLA I've used. --- Older review for the white PLA --- These spools claim a consistent diameter of 1.75 give or take 0.05. Most spools I buy claim the same however I have not once actually /seen/ this amount of variance when measuring the diameter. Most spools seem to measure lows and highs of 1.73 - 1.76. Within a one foot stretch of this filament I can see 1.70 to 1.8mm depending on where I measure. That is within the product's described tolerance so I cannot fault it for that. But I cannot wonder if it is the cause of the slight variance in printed layers that is visible when under direct light. Printed 210/72 Prusa MK3S with full Bear Upgrade, textured PEI sheet. Pictures are after some basic extrusion multiplier adjustment and LA calibration @ .2mm layer height. Like any filament purchase there are far too many variables to judge quality off of the finished print. Not to mention differences in color and batch. I have had small difficulties with adhesion but again that could just be me. I have not yet tried the black roll that I ordered. So to summarize, if you see it and it's cheap and you aren't nutty about quality or consistency, it's fine. However it is not my favorite. It is OK and gets the job done.

Works great and as advertised.

So I usually don’t write reviews unless something is really good or really bad. So I bought this because I just got my first printer and wanted something cheap to practice with. When I tried doing a print at the recommended temps it wouldn’t adhere to the bed on my printer at all. Even after a few attempts and trying to change the temperature and settings etc. so I was pretty disappointed considering I had this whole roll and was going to have to order a different brand before I could do anything. But! Just to see if I could get lucky with it I tried some painters tape on the bed and it adheres perfectly. And I’ve done around 10 prints or more with this stuff, one print even taking 23 hours without any issues and everything I’ve printed has come out flawless. If you put some tape on it and it starts to look bad at the beginning of the print just hold tight and let it do it’s thing. I even ordered another roll of this and it just came in today. So for future prints this is definitely going to be the filament I will use. It’s done so well, a guy has seen my prints and wants to set up some contract work with me. So give it a shot. Can’t go wrong with the price.

The OVERTURE PLA Filament 1.75mm PLA 3D Printer White Filament has an excellent print quality, with a beautiful finish and great grip on the table. The colors are vivid and the final result is very professional, especially for detailed projects. I just noticed that the winding of the filament on the reel was not done in such an organized way, and sometimes the PLA can get taden during printing. Even so, adjusting and monitoring in the first layers, I got great results. Overall, it is a filament with great cost-benefit and very satisfactory performance.

Beautiful matte sheen No issues printing at normal speeds and temps Have not tried anything too hobby yet as it was a 4 color print and my others where normal speed pla . Good white Great price

Worked well in my Bambu Lab A1, with some slight tweaks. I found that lowering the nozzle temp to 210, and keeping the heatbed on 65 or 70 let this print perfectly. If using the stock Overture settings on the A1 I had some adhesion issues, and would get some stringing on larger flat surfaces, but the settings I mentioned above cleared that right up. Very affordable filament and looks great when printed.

I switched from ABS to PLA, and this is my first time trying PLA. I love the printing quality and I'm getting less failed prints (don't know if it's because of the brand or because it's PLA). But the filament is cut in some places. I try to print something, and i come back to find the printer not printing because the filament was cut off. It's not a huge big problem, but it is getting on my way. I will order again because I've never had this problem with their ABS filament, I hope the second one won't be like this, and this was just a faulty one. Update: I haven't had any more cuts so fat, and I have never had a failed print. Not a single one. I am so satisfied with this product :)

I've purchased this brand many times before without any problems, but my recent purchase (Matte white PLA) has been absolutely awful. The plastic will not stick to the bed despite me trying to adapt my print settings to it even though they've worked perfectly with previous filaments of the same type. It also peels up from the bed even though when I increase the bed temperature. I've attached photos showing how it's warped, the print is supposed to be entirely flat. I've spent a few hours trying to get it to print properly, but it's just not worth it. I plan on trying another brand.

Works great

Prints well with no issues. Nice that they have the empty spool weight printed on the spool. Used that to determine that the spool doesn't contain 1kg of filament, it weighs less.

~Edited at the end after using up the roll~ I've had to switch from the previous brand I had (Duramic) because it's no longer available and opted for this one. So far, I haven't managed a single print without any issues. Tangled twice, broke three times and clogged once, had to replace the tube entirely. I'm worried about leaving it alone because it keeps causing issues. The last time it broke, I had to pause mid-print, pull out the filament to avoid it clogging again and as I was grabbing the filament with a 2-fingered feather grip light enough to caress a newborn, it broke again in my hand. None of this ever happened with the other filaments I've used. It's done nothing but cost me money for things like new bowden tubing and print heads and waste my time with failed prints and cleanup. Not a single successful print so far. To top it off, it's very stringy and bridges poorly, but that might be because I haven't found the right settings for this particular PLA (which I won't be using for long anyway). One little tiny thing that's noteworthy about it though is that from the little bit I did manage to extrude without it breaking on me, the layers are nice and smooth compared to the old filament, adhesion is really good. Shame. EDIT: After the initial problems and some research, I learned that tangling is due to user error, not the factory. I still wouldn't get this filament again despite it printing nicely and adhering well, It's still prone to clogging and very brittle. It also tends to adhere a bit TOO well and leave residue, even at lower bed and head temps (flexible magnetic bed). Once you do get a print out of it though, the finish is nice and the quality is overall very good. For comparison, I've switched filament again and it's sturdy even when bent, doesn't clog and prints well.

Usually use eSun but this was on sale really cheap and I needed white for a 20mm diameter Death Star someone wanted printed out. Still playing with settings, had a few issues with the support tree layers looking "gappy", but at around 215 degrees and bed at 55, it printed quite well with just a few bed-sticking issues. Used a glue stick and set first layer speed to 50% and with brims, not bad. Suspect most issues are my inexperience. One issue is the spool. 2 ridges and a gap in the centre... I have a printed spool holder with bearings for the regular spools and this one kept falling off the bearings. Will need to print a removeable sleeve for it because had to reinstall the original holder to make it work. Not a fault of the filament at all, they're nice environmentally friendly spindles, but if like me your spool holder is anything but smooth/solid, you may have issues. Will buy again for sure.