GM Genuine Parts 15-1119 (03041827) Air-Conditioning Service Valve Cover

Worked as described. Fixed my leaking valves on both high and low side of my 01 Suburban. Has been holding for about 2 years now.

this fit in the low side fill port of a 2015 gmc sierra 1500, as indicated. it looks awfully similar to the extras that came in the generic stem tool kit that cost about the same as this one valve and had many parts, but it did fit as indicated, and it seems to have stopped the leak at that location. not sure the price was worth it since i also had to get the kit with the tool which had valve stems in it too, but this does work for what it was supposed to do.

I replaced all the core valve when I flushed, cleaned and rebuilt the AC system top to bottom of my trusty Silverado. Her original AC lasted 18 years before she gave her last full measure. The system is at 250 microns na was pressured tested with nitrogen for three days at 120 PSI. Zero leaks and almost a dull roar when everything is perfect and nothing goes wrong. Big tip for long term success: don't use PAG oil to rub the seals and gaskets. You're asking for oxidation/corrosion creep since the aluminum tubes and components are already been thorough hundreds of heat/cold cycles. Aluminum is always oxidizing. When moisture creeps in as the PAG oil absorb moisture you are on borrowed time. I used GM seal conditioner from the R12 days. It was one of the best conditioners ever made. I fully expect another 15 plus years on the new AC system. Also, when you have the vacuum level you want, load coolant liquid from the high side. Easy to do and gas laws and fluid physics are in your side for a precise and controlled charge cycle. I may post picots of the setup is made up when using this punky little R134a 12 ounce cans. Also, don't pull a vacuum if you can avoid it using those manifold setups. Seperate vacuum and separate charge lines. Just some advice FWIW. It pays to do your homework and be a winner. Peace.

This Schrader valve worked fine in the low-pressure valve of our GM vehicle, but "genuine GM" is certainly overpriced.

Package was opened but fit perfectly and worked well.

I was replacing the leaking high side valve on my ’97 Silverado and figured that after this many years, if I’m replacing the high side, may as well do the low side. Installation is simple using a standard Schrader valve tool. I recharged the system and several months later it is working fine.

Excellent

Quedó perfecto buena calidad