ATR Tile Leveling Alignment System 100 3mm Edge Floors & Walls Spacing Plate

Note - This is just the bottom part. You also need to purchase the Spindles (20S100) for the complete 'system'.

Been a great help keeping tiles level and a lot less waste then the brands seen on TV home improvement shows

I like the concept of this leveling system but the fatal flaw was spacing. I used the top of the tile to plan out my floor with a nice 1/8th Inch gap. When it came time to lay the tile and the plastic pieces were placed under the tile the spacing grew to 1/4 inch. I found out this is because of how the tiles are made, the top is rounded and the bottom is more square. I think this is pretty standard for most tikes. Very frustrating to find this out as I was laying tile. I ended up not using this system to level the tiles. I might try the system again but buy 1/16 inch spacers to get the desired 1/8th grout lines.

A cheap waste of money. Very cumbersome taking up way too much time and doesn’t level and large tiles as well as it does small towels. Much easier to eyeball.

Fantastic product. Made my entire tiling project a complete breeze to finish.

thanks

Pretty good on smaller tiles, but doing a floor with 18X36" tiles, the screw would break out of the alignment discs before the tiles came true. Also, the tiny screw-head gave me huge blisters on thumb and finger and I saw no other way of screwing them into the alignment discs. Once in the discs, however, the levelers worked great with an electric screw driver. Need stronger plastic on the alignment discs and a larger knurled end on the screws.

Scratched and chipped the corners of my tile had to remove a day of tile and replace it with a different system