Zona 35-380 Thick Dovetail Saw, 18 TPI, 020-Inch Kerf, Blade Length 8-Inch, Cut Depth 1-3/4-Inch, Silver

Great dovetail no complaints yet

Works as expected not so good on hardwood seems to dull easily, takes a long time to get it.

I use this for binding and inlays. It cuts smoothly through most materials. When I get into hard maple or purpleheart it does struggle a little bit.

This is a very well made fretting saw that I just used to refret a maple neck from The Fret Wire (the frets that came on it were total garbage). I did not cut the fret slots on the pictured fingerboard with it; however, I did deepen them slightly and used the saw to clear out the existing sawdust and whatever the material was that they used as end filler to hide the tangs. The saw width was perfect, it measured out at .024" on my calipers. After I was finished the StewMac #148 frets that I am using had a nice snug fit in the slots. Can't beat this saw for the money.

Zona makes little saws that cut very finely. This one works very very well and it’s a joy to use. They’re made in the USA too.

A fantastic hobby/gent's saw! Mine came straight and true out of box but there is a video on YouTube on how to tune and reverse the blade of you so choose. The price is about 1/4 of what a higher quality saw of this style would be and unless you need the extra length or prefer a pistol grip it will more than do the job.

Using a miter jig I built for cutting fret slots, and this fret saw, I got perfectly straight cuts and a very consistent width that were perfect for my SteMac-bought pre-cut frets. For the price, a must-have for any aspiring luthier.

Big fan of Zona saws anyways, but the little set of razor saws I had previously lack the mass to absorb heat which meant you had to rather tediously tap them back into place if they started to curve. Unlike those this has enough steel to soak up heat effortlessly, and the teeth face the right direction so I didn't need to flip the blade around before rehandling it. The spine material was soft enough to drill through in a minute or so with a hand drill, but the blade... well, after maybe ten or fifteen minutes I had a dimple in the steel and realized I should have just used the hacksaw to cut a slot. Naturally I take no points off for the blade being too hard to drill through, though I admit I hoped the teeth were backwards because the existing hole is on the wrong end for my purposes. The teeth weren't perfect but I would have filed in a progressive "mountain > cliff > wave crest" sort of pattern anyways so it hardly matters. Though I'm sure they would have sufficed for someone less eager to start filing 18 teeth per inch? I also cut the spine back some, as I didn't feel like trying to drill out an extra inch and a half of space in the handle, and it would have ruined the shape anyways. I have no clue how the original handle is btw, I opened the package, pulled it off, and started sizing a precut handle I had done the night before, though I later went with a swoopier shape since I didn't need all the meat in the grip I had originally and I found a piece with prettier grain to work on. For some reason when I try to upload a photo it seems to disappear, and I can't tell why umatrix is doing that so here it is: https://i.imgur.com/myzhCay.jpg

متوسط الجودة لكن سعره حلو

Excellent product. I like it. I am afraid whether I will not use it avoid spoiling its beautiful finish.

As expected, this is a great little saw for cutting fine dove tails and really most things that I am too lazy to grab a tenon saw for. Only limitation is its depth of cut, but easy to maintain and cuts like a charm, definitely one of my most used saws.

Bought this to deepen fret slots on a mandolin's ebony fingerboard. It worked great for that, despite not being a dedicated saw made for luthier work. You could probably only do a few instruments before it gets too dull for that, though, so don't buy this as a long-term luthier saw.

Por el precio la verdad es que quedé bastante sorprendido por la calidad de esta sierra. Es muy buena y bastante útil para hacer cortes para hacer uniones tipo cola de milano.