Miter Saw Stand, Heavy Duty (DWX723)

I am extremely satisfied with the DEWALT Miter Saw Stand (DW). This stand is a game-changer when it comes to portability and convenience for my miter saw. The stand is impressively lightweight, making it easy to transport and set up at different job sites. Despite its lightweight design, it has a robust 500 lb capacity, ensuring stability and durability even when handling heavy materials. One of the standout features of this stand is the leg locks, which allow for quick and effortless setup. The leg lock mechanism securely holds the stand in place, providing a sturdy foundation for accurate and precise cuts. It saves me valuable time and effort during setup and breakdown. The construction of this stand is top-notch, as expected from DEWALT. It is built to withstand tough job site conditions and frequent use. The materials used are of high quality, ensuring the stand's longevity and reliability over time. Additionally, the stand offers excellent versatility. It can accommodate a wide range of miter saws, making it compatible with different models and brands. The adjustable support arms provide added flexibility, allowing for easy customization to suit the specific needs of my projects. Overall, the DEWALT Miter Saw Stand (DW) has exceeded my expectations. Its lightweight and portable design, along with the leg locks for easy setup, make it a valuable tool for any professional or DIY enthusiast. I highly recommend this stand to anyone in need of a reliable and convenient solution for their miter saw setup.

There are a lot of things to love about this miter saw stand, and only a couple of drawbacks: pros: Rugged - you would have to work hard to loosen it - the legs have a large snap-in key and are sturdy. The levers to fold up the legs are large and thus are easy to depress. Easy to put together - basically, you just unfold the legs. Even when you have a non-standard (meaning non DeWalt) saw it isn't that difficult. I put my little 30 year old Makita sliding compound miter saw on with probably 2 hours of work total. I had to cut a piece of plywood, and because I wanted it to be nice, I sanded it and put on a couple coats of polyurethane. Then attached the brackets and the saw - about 1/2 hour all together including measuring. If it is a DeWalt saw, it will fit the brackets directly. Although it is nice to have that extra room to put stuff, so the plywood is useful. The directions to do this are very clear, by the way. Both sides of this stand extend making it suitable for decking and other projects that require long stock. Cons: The stops they provide are OK, but they are pretty small and if you are working with 2 x 12 or 4 x 4 (on my saw I need to put a backer board against the fence as the saw small and the blade is in the way). So I bought the BIG 12" versions - 1 roller and one 'stop'. Should have gotten 2 rollers as I find them far more useful. I don't rely on the stops for this stand. I'll probably toss the 6" ones that came with the stand. Here's the roller that fits it: DEWALT DW7027 Wide Roller Material Support Works great and you don't have to add as many quarters to the swear jar when the wider stock slips off the narrow 6" stops they provide. I put a couple of cinder-blocks under the legs and lay a 2 x 12 across them as a storage place for squares, pencils, kitchen sinks. You know how it is. This works especially well as I leave the saw out near my projects and just keep the stand and saw covered with a tarp, thus keeping my tools high and dry as well. Can't think of any other negatives.

a premium, well built unit. PRETTY EASY TO SET UP. THE HEIGHT IS PERFECT FO ME. IT REALLY ADDS THAT TOUCH OF PRO FEELING TO ANY DIY NOOB. IT ADD VALUE TO YOUR MITER SAW. YOU CAN TELL THEY WERE MEANT TO BE TOGETHER. I WOULD SAY TO ANYONE WITH A DEALT MITER TO GET ONE OF THESE. THIS ON EIS ON THE BIGGER SIDE BUT IF YOU DONT HAVE THE SPACE FOR IT THEN GO AHEAD AND GET THE COMPACT VERSION BUT THIS ONE IS PRETTY AWESOME. MUY ONLY DIASPPOINMENT IS THE FACT THAT I HAD TO BUY IT SEPARATELY AND THAT IT DIDNT COME WITH THE SAW AS A KIT.

I have used this for years

I bought this for my husband for his birthday in June so we've been using it for around 3 months. I also purchased this: DEWALT DW7029 Wide Miter Saw Stand Material Support and Stop after reading some reviews that it was helpful in stabilizing wider pieces. It's a great set-up and I have no regrets about the decision to purchase it. I was debating about the portable, collapsible saw stand but am glad that I chose this one. It was pretty simple to set up, just attaching the included mounting brackets to the saw and then moving it to the easily set up base. The brackets slide over the rail and snap in place. The stand didn't look as though it would be solid and sturdy enough (to me) to hold the saw but it certainly is. The extra material support that I also purchased slid on the support arm and tightened down securely. It was nice to have the end of the workbench back too, although it quickly was filled up again. There's never enough horizontal space! We are weekend builders, so this hasn't gotten the regular use that tradesmen would give it. It is a very much appreciated saw stand, however, and relieves the frequent battle we had with space. We had the floor space to place it in so it's been a winning purchase for us. If we have any more to add as we continue to use this, I will update my review. Edit- We've had this for a year now and my husband has commented about how much easier it is for him to use his saw, thanks to this stand. Being able to place it in the "open" with this stand allows him more flexibility with the longer pieces of wood that he cuts. The supports do droop a bit the farther they go out, but that's to be expected, isn't it? You will need stationary stands for more reliable height control. The stand folds easily and conveniently to transport. The saw removes quickly and easily too, once the brackets are attached. Love it, and would purchase again!

I was in need of a new miter saw stand. This one kept coming up, the price was right so I bought it. It took 2 times to get it right. The first box arrived 2 days late of what was promised. It was taped heavily, it looked as though it was delivered to a customer and shipped back. After opening I found my suspicions to be correct. It was dented and scratched up so I sent it back. It was cheerfully exchanged by Amazon. I believe I got the second one quicker than the first. It required very little assembly, sort of. The stand wobbled a little so I checked a retightened some of the hardware. It was better afterward. I own a Milwaukee 10" basic miter saw. The directions on how the brackets install on the saw and allow you to attatch it to the stand are misleading and mickey mouse. They state if you are not using a Dewalt saw you need to install a 3/4" piece of plywood to the brackets, and then fasten the saw to the plywood. I looked at the brackets and installed the saw without the plywood. It was perfect and solid except the fasteners used to mount the saw to the brackets were too long, 3/4 of an inch too long. There was the reason for the plywood. If I would have used their supplied fasteners I could have scrapped up my knuckles as I moved the saw to either 45 degree position. I replaced the front fasteners the back ones weren't an issue for $1.60. A much easier, cleaner install and much less work. The final rating is a nice and sturdy stand, simple to attatch and remove the saw. The slide out supports are well made and the work piece supports and length stops are easily adjustable. The legs fold up and lock nicely. There is a carry handle mounted on the bottom makes it easy to move in and out of the truck and in and out of the job site. Overall I believe it was a good buy.

DEWALT SAW DWS780 REC'D Thursday, February 8 MODEL DSW780 TYPE 24 MANUFACTURED TAIWAN THIRD WEEK OCTOBER 2023 MANUFACTURE CODE 2023 43 CJ ---------------------- PRODUCT REVIEW BELOW ---------------------- DWX723 Stand 6-Foot BOX Was ENTIRELY OPEN. All LARGE COPPER STAPLES along ENTIRE LENGTH were RIPPED OUT. The stand itself was worth every penny. Incorporated very useful and thoughtful design features - and did it very well. Great material support with all features facilitating the workflow -- smoothest measurement and cutting (including an indispensable and sturdy workpiece length stop which assures accurate repeated cuts of equal lengths). Nothing was missing or damaged. Bought a 12" DWS780 Type 24 Miter Saw, MFD third week of October 2023, AND DWX723 Stand together for about $80 less than cumulative separate prices. Great product. Placed my DWS780 Type 24 miter saw on it. Cutting many 2x4s right now, but getting very good cuts and every bevel alignment was perfect - even double bevels of both left and right directions and both directional tilts. I never had that with any of MY past three (3) radial arm saws, or my father's two (2) before that. I also bought several accessories since the total extended support which this stand provided is ~16 ft. A wider workpiece support (with a stop) is useful, support rollers to use midway of longer pieces, an automatic shop vac switch, and an 80 or 100 tooth blade equip this saw and stand very nicely.

A solid stand for any miter saw with plenty of capacity for longer items. It is portable but if you’re changing location frequently then a stand with wheels maybe your best option. Some reviews mention that the box looks beaten up on arrival and mine did too. All the staples were loose and it looked like it had been previously opened. However, this was not the case. The unit has a heft to it and tends to beat up its packaging. Once opened, mine had no damage.

Exelente producto, la base para sierra de gran calidad y lo mejor su precio . solo pague $6000. por ella.

I've used several of these over the years, and I must say that dewalt have addressed most of the quirks and niggles in this latest iteration. First of, it comes fully pre-assembled in the box, which is very useful, all you need to do is slide in the included adjustable mounts and bolt the included brackets to your saw and you're done, ready to go in minutes, literally! As for the little improvements; the old style stand had leg locking pins you had to push in to release, now, they've added rear mounted levers that "pull-in" the pins for much easier handling (and avoiding the ol nipping at you fingertips); small improvement, huge difference! Also, the locking of the extension beams used to be done with an awkwardly placed knob, which has now been replaced by a lever that's much easier to operate, again, small improvements... Overall very pleasantly surprised ; I was expecting the good ol' tried and true "built like a tank" stand, I actually got the "new and improved" version. Awesome. These are built to last, the heft and feel of the thing simply exudes quality and sturdiness. This is the one to get. Slight addition: this thing is huge at over 6 feet long even folded, which might be a concern for someone planning to move it around often from site to site, or with limited storage/cargo space when not in use. The dwx724 is the exact same heavy-duty stand in a 4 feet version that's much easier to store away or lug around... So unless you are planning to use it for lengthy material on a regular basis, you may want to make your life a little easier by going with the "shorty"...

This is the best stand, sturdy and strong with the ability to add attachments to even do more. I own a heavy duty double compound 12 inch dual rail sliding Milwaukee miter saw, but this is the stand to support it. It is large for those big jobs, and can support a lot of weight and do it easy. Quality build, well thought out design, there is no contest when it comes to which mitre stand to buy.

Excelente soporte para tus equipos de sierra!!

I gave it a five star rating cause it is so handy. No more putting boards on garbage cans, blocks, etc, to cut them. Like this cause you can set it and cut same length of wood without having to measure each time. Made very well as is easy to set up. Price was very reasonable also. It is a bit heavy, but I am still glad I got the bigger one. I am only a Do it yourself kind of carpenter. Far from a pro. I can't imagine how handy this stand would be to a Professional. I would recommend this stand to anyone.