NEW WR55X10942 Replacement Control Board Compatible for GE Refrigerator, PS2364946, WR55X10942P, WR55X11130, WR55X10552, WR55X10656, WR55X10996, WR55X11072, 200D4852G010 Primeco Brand - 1 YEAR W

Wife wanted me to buy new refrigerator after this ge side by side stopped working completely! I found this motherboard that matched my model and so happy I found this part and it worked 100%. Best price and quick shipper. Took me less than 20 mins to switch out the boards. Easy to do DIY project. A++

IMPORTANT UPDATE TO THE REVIEW BELOW: While this board brought the fridge to life, I realized after a day or two that the fruit and vegetables were freezing. The damper was functioning and the thermistors were ok but I replaced them anyway. This failed to solve the problem and the temperature was completely unresponsive to the warmer/colder settings for the freezer and fresh food part. I contacted the seller and his closing comment was that I should buy a GE original board. This board was advertised to replace the WR55X10996 board originally in my fridge, but obviously it does not function properly in my refrigerator.ORIGINAL REVIEW: This worked like a charm for my bottom-freezer GE refrigerator Model gdsl3kcycrls, whose control board was fried during a power outage last week. In that outage, one of the resistors that is part of the "snubber" circuit to protect the evaporator motor was burned, the one next to it that apparently protects the condenser fan was not. See the picture of my old board, attached. I tested both fans and they worked fine, but the board was fried. IMPORTANTLY, on my model, the left-most connector that goes to (what I believe is) J5 is only a 5-pin connector. It has orange, red and purple wires. The new board has a 9-pin connector. So I had to trim off the little piece of plastic on the housing of the female connector and plug it in to the last 5 pins of the 9 pin connector that is on the left side of the new board, sitting there all by itself next to the 3 power pins. It's obvious which end this 5-pin connector should be attached to, because the second pin is missing on the female and male connectors. The fridge won't work if you don't connect this connector.

After the power outage the refrig stopped working (GE Profile PSS26MSRC). The lights were on but the water dispenser did not work and the compressor did not start. This is a 15 year old refrig so I did not want to spend $400+ for the OEM board. Instead I bought this one and installed it. The refrig is working again. Installation was easy (10 minutes), just be careful as you pull the wire connectors from the old board. Mark the connectors and take a picture before removing them.

Good motherboard, it fits and works well.

Drop in replacement for a board identified as faulty. Half the cost of the GE official replacement board. Make sure you connect all the harnesses connected properly and that the original board didn't fail due to an issue somewhere else (new board will obviously just fail too)EDIT: 3 months later and my fridge is still running strong!

I bought this controller to replace the defective one in my 20 year-old GE Profile refrigerator and it works flawlessly. It was a quick and easy installation and I am happy to be able to fix the problem myself, without having to pay to a local appliance repair tech $500+ (for OEM part & labor)!

Worked for one week then stopped sending defrost command so evaporator froze up, had to reinstall original board with less critical issues to use refrigerator. Board paperwork claims one year warranty but return policy is only 30 days, buyer beware!

Installed in GSHF3KGXCCWW GE side by side 2009 model.While I have replaced the motherboard about five times so far because of storms, outages and lightning. This time because the Electric company needed to change out my meter. Something spiked taking out the board. After being denied several times I called local news. They are now making amends.This board is very new and shiny. It works better than any board previously replaced. With all the practice of replacing boards this was the easiest. Very fast and easy install. The price was correct for the quality I received. Fridge is cooling and functioning very nicely. Just waiting for the next outage.