Durabak-18 Textured Truck Bed Liner Gallon KIT - Roll On Coating | DIY Custom Coat for Bedliner and Undercoating, Auto Body, Automotive Rust Proofing, Boat Repair (Gallon, Black)

Yes, this product comes thick, you must carefully stir it and loosen it up “do not shake”. This product has contents that promote a slip resistant surface! I applied to my 16’ trailer wood surface and I am extremely pleased with the outcome! Looks beautiful, applied with relatively ease and dried pretty fast, however I will be abiding by the 7 day cure status. I asked the company about its durability and their response please me even more… I used a bed liner product on the metal and a colored Durabak product on the wood. It simply looks awesome!! Completely recommend..

Square footage coverage might be a little optimistic, but it’s really nice stuff when you take the time do the prep as they recommend and lay that stuff on thick

Good stuff; prep is key. Be sure to Sand and prime your bed - and wipe down with recommended Xylene. You will also get the EP-90 primer and Xylene separately. This product dries out fast, so you will need the Xylene to thin it out. I got a little sloppy towards the end, as the product was drying, so my advice would be don’t rush - and keep it thin.

Painted my Mustang blood red with this. Looks great and no more scratches from bad drivers, pets and playful kids. was very easy to apply, just make sure you mix it really really well.

This was my first time using any bed liner material and it was very positive. The first coat rolled on easy and dried in a few hours. The second coat really added the texture to the bed. I have tried a few areas to get pieces to peel up with my fingernail but had no luck. I coated the bed, front of the bed and tailgate on a mini truck and had about a quart left over after the second coat. Once I stirred it the material stayed in suspension really well. The only downside was the smell. I put this on in my garage with both doors open and the smell was intense. Had to close the doors for the night and in the morning the smell was very strong. Opened both doors and it went right out. Caution not to do this in a room or building that you cannot get some ventilation in. Pretty sure some brain damage may occur. Used the white on my white truck and could not be happier with the results.

I you are expecting a decent finish use something else. I am restoring a 98 chevy P/U. did all the body work and painted it and for my first ever paint job it came out damn near perfect. I opened the can of durabak and wasn't going to use it but I figured how bad can it be... I looks so bad I plan on putting the old plastic bed liner in over top of it! I had to use a lot of xylene to thin it and the ground up rubber would not roll or brush out smooth. clumped up in spots and the more you try and smooth it out the worse it gets. all I can say is what a huge disappointment. How would I even go about getting this stuff off? I am better off buying a bed from the junkyard and starting over. This product ruined a months worth of work and close to 1k in materials!!!

Worked as advertised. Love the vivid blue, reminds me of voodoo blue from Toyota. Did the recommended preparation with 80 grit sandpaper, blew debris out with a blower then wiped it down with xylene. Mixed real good with a paint mixer on a drill. It came with 2 4" rollers but I ended up just using a brush because of too many grooves & nooks & cranny's in my truck bed. Spraying probably would have came out a little better but I'm happy so far. 2 coats are definitely required for best results. I have a 5ft. bed in a 2024 Chevy Colorado & ended up with a little leftover from a gallon that I splashed with some xylene & mixed before storing. It was a sunny day in the low 80's & was able to put the 2nd coat on after about 2 hours with no problems.

Do not usually write a review but the stuff was extremely good worth the money worked great easy to apply painted my whole truck with the white and the blue and it worked fantastic